Pneumatic Drill Rig
The track-type open-air pneumatic split drilling rig produced by TAIYE uses compressed air as the power, mechanical direct control system, no wires and engine connection, the structure of the trailer mounted drill rig is very simple, and the whole vehicle is very convenient to repair and maintain.
Know More about Pneumatic Drill Rig
This series of blast hole drill rigs are suitable for perforation and blasting projects in mining, earth-rock engineering, road construction in severe cold regions, extreme regions, high-altitude regions. It also is used to drill leading detection holes in tunnels and mines. The drilling industry construction is mostly used in harsh working environments. This equipment is easy to operate, convenient to maintain, and maximizes the working time. Compared with the split hydraulic rig, it needs to match the high-power air compressor.
Through more than 3,000 hours of destructive operation tests and 4 field tests in different geological environments, we have improved more than 10 mechanical holes in the pneumatic drill rig.
We, as one of the most professional rotary drilling rig manufacturers in this field, have solved the three key technical problems of "high failure rate, high wind consumption, and high use cost" of previous pneumatic drilling rigs, and also achieved the requirements of "low maintenance cost, low wind demand, and high drilling speed".
Pneumatic drill rig is a typical durable model. Click here for more mobile drill rigs for sale, or you can leave a message, we will get in touch with you ASAP.
How Does the Pneumatic Drill Rig Work?
The pneumatic drill rig needs five basic components to accomplish a task, including the compressor, reservoir, valve, circuit and actuator. First, the compressor turns ordinary air into compressed high-pressure air, then the air is stored in a reservoir. The valve works by switching the air on and off, allowing air to flow into the bottom or the top of the cylinder. The air will be pushed through the circuit, forcing the piledriver down so it pounds into the drill bit. After getting compressed air, the actuator can use compressed air to move, lift or hold an object.
What is the Blast Hole Drill Rig?
A blast hole drill rig is a kind of heavy equipment widely used to drill holes to a certain depth in a directional way for load explosives, with extensive applications in the industries of construction and mining, oil and gas, demolition and recovery, and other quarries.
Is the Blasting Rig Expensive?
Generally, the large-range blasting rig is more expensive compared with mid-range blasting rig. And the custom-made blasting rig, due to its extensive functionality, is usually more expensive than ordinary ones. But our blasting rig products are reasonably priced and much more affordable to some extent, meeting the real needs of users who show strong interest.
What Are the Features of the Blast Hole Drilling Machine?
The blast hole drilling machine features high performance, easy and stable operation, low maintenance cost, high drilling speed, adaption to harsh working environments, low failure rate, and wide applications.
What Are the Advantages of the Pneumatic Drill Rig?
The pneumatic crawler drill has the advantages of: (1)powerful production of greater torque; (2) robust and long-lasting performance; (3) simple repair and maintenance; (4) economical effects; (5) adaption to sites without electricity.
在线联系供应商
Other supplier products
 |
TAIYE DRILLING RIG MACHINE FOR SALE | TAIYE DRILLING RIG MACHINE FOR SALE TAIYE specializes in the design, manufacturing and service of different types of drilling rigs, such as rotary... |
 |
Full Hydraulic Surface Top-hammer Drilling Rig | Looking for truck mounted rotary drilling rig, top hammer drill rig, surface drilling rigfor sale? Our full-hydraulic open-air top-hammer drilling ... |
 |
Pneumatic Drill Rig | The truck-mounted open-air split pneumatic drill rigproduced by TAIYE uses compressed air as the power, mechanical direct control system, no wires ... |
 |
Pneumatic Drill Rig | The track-type open-air pneumatic drill rigproduced by our company uses compressed air as the power, mechanical direct control system, no wires and... |
 |
Drill Bit | TAIYE provides customers with high quality drill bitsand they are all considered by many regular customers as the best drill bits or drill bit sets... |
Same products
 |
XD-MAX Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... |
 |
XD-55 Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... |
 |
XD-10 Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... |
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | 卖方: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | 卖方: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
