PC Injection Molding
PC is classified as a ''thermoplastic'', and the name has to do with the way the plastic responds to heat. Thermoplastic materials become liquid at their melting point (155 degrees Celsius in the case of Polycarbonat). A major useful attribute about thermoplastics is that they can be heated to their melting point, cooled, and reheated again without significant degradation. Instead of burning, thermoplastics is like Polycarbonate liquefy, which allows them to be easily injection molded and then subsequently recycled.
PC is commonly used for plastic lenses in eyewear, in medical devices, automotive components, protective gear, greenhouses, Digital Disks (CDs, DVDs, and Blu-ray), and exterior lighting fixtures.
Injection molding most often produces parts by polycarbonates and their blends. Since polycarbonate is highly viscous, it is usually processed at high temperature to reduce its viscosity. In this process, the hot polymer melt is pressed through into a mold with high pressure. The mold when cools, gives the molten polymer its desired shape and characteristics. This process is generally used to manufacture polycarbonate bottles, plates etc. Since polycarbonate is a poor-flowing plastic, wall thickness should not be too thin.
Properties of PC Injection Molding
Feman Tooling is a professional plastic die maker in china. We provide plastic injection mold and molding, Automotive Parts, Home Appliance, injection moulding products, polycarbonate injection, pc abs injection molding, molding polycarbonate, polycarbonate injection moldingand so on. Want to know can polycarbonate be injection molded? Please contact us.
在线联系供应商
Other supplier products
 |
Injection Molding Material | With yeas experience and excellent machinery, Feman Tooling always provides customer high quality injection molding mold, plastic injection mold an... |
 |
Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white, and its natural color (off-white or beige). Perhaps the most com | Nylon is commonly referred to using the chemical designation “PA” (e.g., PA 6 or PA 6/66) and is most widely available in black, white,... |
 |
Prototype Samples Making | Prototype samples of plastic injection molding products are basic working samples, mockups, models, or just simulations of actual products, and oth... |
 |
Automotive Plastic Injection Molding | With yeas experience and excellent machinery, Feman Tooling always provides customer high quality injection molding mold, plastic injection mold an... |
 |
Tool Building | As a good reputation manufacturer in China, we here share the basic injection mold making process in our company: Products design department provi... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
