TG-E Multi-stage Hydraulic Cylinders
What is TG-E Multi-stage Hydraulic Cylinder?
TG hydraulic cylinder is a single-acting multi-section telescopic sleeve lift cylinder. It has the advantages of small size and long stroke, and is mainly used in the hydraulic system of engineering and mining dump trucks.
Advantages of TG-E Multi-stage Hydraulic Cylinders:
Multi stage telescopic hydraulic cylinderare also known as multi-stage hydraulic cylinders. It is made up of two or more stages of piston cylinders, mainly composed of cylinder heads, cylinders, sleeves, pistons and other parts. There are inlet and outlet ports A and B at both ends of the cylinder. When the A port enters the oil and the B port returns to the oil, the first stage piston with a large effective area is firstly driven, and then the smaller secondary piston movement is pushed. Since the flow rate entering the A port is constant, the piston with a large effective working area has a low moving speed and a large thrust, and the moving speed is high and the thrust is small. If port B enters oil and port A returns oil, the secondary piston will first return to the end point, and then the first stage piston will return.
The characteristics of the telescopic hydraulic cylinder are: the working stroke can be very long, and it can be shortened when not working. It is suitable for applications where the installation space is limited and the stroke requirements are long, such as dump trucks and crane telescopic arms. When the telescopic hydraulic cylinder is extended step by step, the effective working area is successively reduced. When the input flow rate is constant, the overhanging speed gradually increases; when the external load is constant, the working pressure of the hydraulic cylinder gradually increases. The extension of the single-acting telescopic hydraulic cylinder relies on the oil pressure, and it relies on its own weight or load when contracting. Therefore, it is used in the case where the cylinder is tilted or vertically rotated. Our company can customize telescopic hydraulic cylinders according to customer requirements.
JC forging is a professional forged components manufacturer. We provide 5 stage hydraulic cylinder, 4 stage telescopic hydraulic cylinder,three stage hydraulic cylinderand etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
HSG Engineering Hydraulic Cylinders | Brief Introduction: HSG type engineering hydraulic cylinder is a double-acting single-rod piston type hydraulic cylinder. It has the characteristi... |
 |
Hydraulic Cylinder End Cap | Product: hydraulic cylinder end cap Application: hydraulic cylinder Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 ... |
 |
Forged Trunnion | Product: forged trunnion Application: hydraulic cylinder, truck Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grad... |
 |
Hydraulic Cylinder | Hydraulic cylinder is an actuator that converts hydraulic energy into mechanical energy and performs linear reciprocating motion (or oscillating mo... |
 |
Forged Clevis | Product: Forged Clevis Application: hydraulic cylinder Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A216 70-36 grade WCB ... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
