Reflow Oven Soldering Process
The reflow soldering processis a surface-mounted board, and its process is more complicated which can be divided into two types: single-sided mounting and double-sided mounting.
A single-sided mounting: pre-coated solder paste → patch (divided into manual placement and machine automatic placement) → reflow soldering → inspection and electrical test.
B double-sided placement: Aside pre-coated solder paste → patch (divided into manual placement and machine automatic placement) → reflow soldering → B side pre-coated solder paste → placement (divided into manual placement and machine automatic placement) → reflow soldering → inspection and electrical test.
The simple process of reflow soldering is "screen printing solder paste-patch-reflow soldering, the core of which is the accuracy of the screen printing. For the patch, the yield rate is determined by the machine's PPM. The reflow soldering is to control the temperature rise and high temperature. And falling temperature curve.
What is a Reflow Oven?
A reflow oven is an indispensable machine in the SMT production line. It is mainly used for soldering circuit boards with mounted components. The solder paste is melted by heating to fuse the chip components and the circuit board pads. Then the solder paste is cooled by a reflow oven to cool the components and the pads which are cured together. A reflow oven is a kind of machine that is completed by soldering the parts on the PCB board through reflow soldering.
How Does a Reflow Oven Work?
Soldering Techniques in PCB
PCB soldering technology in the process of electronic industry development in recent years, it can be noted that a very obvious trend is reflow soldering technology. In principle, traditional plug-in parts can also be reflow soldered, which is commonly referred to as through-hole reflow soldering. The advantage is that it is possible to complete all solder joints at the same time, minimizing production costs.
Soldering Temperature for SMD Components
Take the temperature rise-heat preservation-peak temperature curve as an example, the requirements are as follows:
- ～1℃/s or below 4℃/s, depending on the solder paste and components.
If you want to know more about stontronics limited, please contact us.
Now the price of pick and place machine for saleis affordable, if you have needs, please leave us a message.
在线联系供应商
Other supplier products
 |
Pick and Place Machine TronStol 3V Standard | Semi Automatic Pick And Place Machine This kind ofpick and place machinefeatures a dual head, 25 feeder slots, a vision system, and a flexible p... |
 |
Pick and Place Machine | The pick and place machine is the equipment used to achieve high-speed and high-precision placement of components in the production line, it is con... |
 |
Semi Automatic Pick And Place Machine | This kind of pick and place machine features a dual head, 25 feeder slots, a vision system, and a flexible positioning system. The semi-automatic/m... |
 |
Reflow Oven D8 (Desktop) | Desktop Reflow Machine Please move down to understand the parameters and information. Specification of Reflow Oven D8 (Desktop) Mode... |
 |
Label Feeder | About of Label Feeder Machine Tronstol SMT Label Feeder For Tronstol A1 Pick and Place Machine The easiest and cheapest way of marking a prod... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
