EPS Sandwich Panel Machine Line
Main structure features ofEPS Panel Machine
1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and high efficiency.
2) The EPS sandwich panel production line is welded by H-beam with shot blasting treatment on the surface, so the whole structure is simple and stable.
3) Consecutive laminating body transmission adopts worm and worm gear in order to control the producing speed steadily. The consecutive laminating body can cut to length with the advanced frequency control.
4) Three groups heating system to adapt the environmental temperature in different places.
5) Glue Providing system is driven individually. The horizontal compound, glue evenly, without any pollution.
6) Consecutive laminating body is long to guarantee the flatness of the sandwich panel.
7) The moving stroke of the cutting system is long to extend the life of the cutting tool.
Contact us forEPS sandwich panel machine price! Or contact us for more information about othersandwich panel production machinery/line.
Main Technical Parameter of EPS Sandwich Panel Production Line
Specification ofSandwich panel produced by Jinggongsandwich panel making machine:
Length: Min cutting length is 2 m
Max cutting length is 15m
Width: (see profile drawing)
Thickness: (see profile drawing)
Raw material specification:
coil thickness: 0.4～0.6 mm (steel be flat without ups and downs, deformation and bending)
sheet yield stress: ≤235MPa
coil max width: 1200 mm (tolerance±2mm)
coil max weight: 4T
coil ID: Φ500 and Φ600 mm
coil OD: Φ1000 mm
EPS material: density is≥18㎏/m3, unstraight of each side ≤1㎜/m, curve ≤3㎜/m, surface be even, unevenness smaller than 1.5mm/m, EPS material single piece length more than 3m.
Material suitable shape: see profile drawing
Material suitable width: minimum shall be 1/2mm of the finished panel width.
EPS panel production linespecification:
Work line speed: 1000-3000mm/min (frequency speed adjustment).Attention: depending on glue brand, temperature and proficiency of operators.
Machine length: about 40 m
Working height: 1050 mm（panel output height）
Laminating effective length: 7.5m
Control way: adopt industrial computer PLC
Total power: about 35 kw
Power: 380V/3phase/50 Hz
control voltage: 24 V/110 V/220 V
pneumatic: 0.7 Mpa (self-prepared by the factory)
best working temperature: around 25℃
Main Structure Components OfEPS Sandwich Panel Production Line
This EPS sandwich panel lineconsists of one roll forming machine and one laminating machine. It adopts international roll forming technology, laminating transmission technology, air-actuated and electric & hydraulic control technology. The whole EPS panel production line only needs 6 or 7 workers.
The whole sandwich panel machine line consists of two parts: roll forming part and laminator part.
1) Roll forming part
The roll forming machine consists of a hydraulic uncoiler, guiding system, filming system, flat sheet slitting system, roll forming system, panel support frame, assistant forming machine and so on.
2) Laminating body
This part consists of a guiding device, laminating body, cutting system, glue feeding system, support device and electric control system, etc.
Panel Drawings Of EPS Sandwich Panel Production Line
Zhejiang Jinggong Science and Technology Co., Ltd.is a professional sandwich manufacturing company, Jinggongprovides rollforming machines, sandwich panel machinery, etc.
在线联系供应商
Other supplier products
 |
C/Z Purlin Roll Forming Machine | The C/Z purlin roll forming machine can form hot/cold rolled metal strip through leveling, cold roll forming, punching and cutting off to produce C... |
 |
What Are the Advantages of Cold Roll Forming Machine? | What Are the Advantages of Cold Roll Forming Machine? The cold roll forming machineis composed of the hydraulic device of the cold roll equipment ... |
 |
Auxiliary Equipment | Here is the different types auxiliary equipmentof our roll forming machine: curving punching forming machine, filming and cutting machine, slitter,... |
 |
High Speed Tile Forming Machine | This series of high-speed tile roll forming machine is a new-generational type roof tile forming machinewith high speed and high-efficient, includi... |
 |
Corrugated Web H-beam Welding Line | The corrugated web beamautomatic welding machine adopts the welding robot originally from Italy which automatically controls the works such as the ... |
Same products
 |
GT-DG250 轧辊机 | 卖方: 肇庆古雷特科技有限公司 | • 产品描述 GT-DG250 缩管机采用一组对辊组件，根据需求加工孔位，逐孔逐级（由大到小）对管材进行缩径。可用于加工铜、铁、不锈钢、铝等材质的圆管、方管、扁管、椭圆管。 &bu... |
 |
Double Spindle Lathe NL251D | 卖方: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | 卖方: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
