KRD61 6-DOF Test Table
KRD61 series 6-DOF test table is six-degree-of-freedom multi-functional closed-loop servo motion simulation test equipment. It is applied to provide the user's system single 6-DOF (X, Y, Z, α, β, γ) motion of longitudinal, horizontal, vertical, roll, pitch, and heave. This multi axial simulation table can swing periodically according to the set amplitude and frequency, and can also import the road spectrum to track the movement.
KRD61 series 6 dof tablecan be widely used in testing or training simulators in the fields of flight, ship, helicopter, automotive, take-off and landing, train driving, earthquakes, movies, entertainment equipment, etc. It can even be used for docking of space spacecraft and refueling docking of aerial tankers. In the processing industry, it can be made into six-axis linkage machine tools, intelligent robots, etc.
FEATURES OF KRD61 6-DOF TEST TABLE
Large bearing capacity, the equipment can bear the maximum load of 10,000kg
Remote control function and can realize the transmission of specified data
Fully digital control technology: adopt a fully digital control loop, the 6-DOF positive and negative solution, position loop, speed loop and current loop are all realized digitally, avoiding the interference caused by analog circuits
It can realize posture simulation, sine wave simulation, single-DOF motion, and multiple-DOF composite motion
It can realize road spectrum filtering, road spectrum, wave spectrum, and flight spectrum replication
With abnormal alarm module, the program will automatically alarm and locate the specific module if the hardware module in the system fails
Multiple safety protection: in addition to speed and acceleration protection in software, the equipment also has limited voltage protection, overcurrent protection, limit protection and other protective measures in electrical aspects
COMPOSITION OF KRD61 6-DOF TEST TABLE
KRD61 hexapod tableis mainly composed of three parts: mechanical structure, electrical control system, and measurement and control software.
The 6-DOF simulation table includes an upper platform, a lower platform, an upper hinge, a lower hinge, and a servo actuator. The servo actuator is composed of an electric cylinder and a servo motor. The servo actuator receives the control signal of the servo control system, performs work on the platform, and enables the upper platform to realize the specified simulation movement.
For more information about test equipment mechanicaland vibrating shaker table, please feel free to contact us!
在线联系供应商
Other supplier products
 |
KRD11 Pneumatic Vertical Shock Test Machine | KRD11 is a fully automatic pneumatic shock test machine. It is vertical shock test equipment with a novel design, high degree of automation, simple... |
 |
KRD16 HIGH IMPACT SHOCK TEST SYSTEM | KRD16 series shock test system is a standard testing machine stipulated by the high impact shock test method and meets MIL-S-901D standard which co... |
 |
KRD14 Pneumatic Vertical Shock Response Spectrum Test System | KRD14 series shock response spectrum test system is full pneumatic driven vertical lifting SRS test equipmentwith special design, easy operation, r... |
 |
KRD200 Center of Gravity Measurement System | The center of gravity (CG) (or center of mass) of an object is the average location of the weight (or mass). It's a crucial mass property in the fi... |
 |
KRD32 NON-STANDARD CONSTANT ACCELERATION TESTER | KRD32 series non-standard constant centrifuge acceleration testingmachineis a box-type test machine for electronic components, small components, an... |
Same products
 |
GT-DG250 轧辊机 | 卖方: 肇庆古雷特科技有限公司 | • 产品描述 GT-DG250 缩管机采用一组对辊组件，根据需求加工孔位，逐孔逐级（由大到小）对管材进行缩径。可用于加工铜、铁、不锈钢、铝等材质的圆管、方管、扁管、椭圆管。 &bu... |
 |
Double Spindle Lathe NL251D | 卖方: Lecn Anhui Co., Ltd | A is an advanced CNC lathe equipped with two spindles, typically referred to as the main spindle ... |
 |
Automobile Torsion Beam Milling Machine X8220125 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 1250-1550 mm workpiece len... |
 |
Joint Cross Machine CZ821030/TZ820510 | 卖方: Lecn Anhui Co., Ltd | Both ends of the one clamping are processed at the same time, the with 100-300 mm workpiece lengt... |
 |
Break Cam Milling Machine CM0525 | 卖方: Lecn Anhui Co., Ltd | can precision milling cam diameter of 250 mm, which is suitable for milling automobile brake cams... |
