HBC SERIES CNC HORIZONTAL BORING MILL FOR SALE
HBC SERIES CNC HORIZONTAL BORING MILLFOR SALE
HBC Series is our CNC horizontal boring machine. According to the different sizes, we have HBC1116 CNC horizontal boring machine and HBC1316 CNC horizontal boring machine. We introduce German mineral casting material for our horizontal boring and milling center base and column. It has better shake absorption and Low thermal expansion. Worktable, sliding seat, and headstock are supported by heavy-duty roller linear rails to ensurecnc boring machinehigh rigidity and reduce the weight of moving parts. Choose Deed CNC, one of the top horizontal boring mill manufacturers.
HBC SERIES HORIZONTAL MILLING AND BORING MACHINE SPECIFICATION
|
Model |
HB1116 CNC Horizontal Boring and Milling Machine |
||
|
Boring Shaft |
Diameter |
mm |
110 |
|
Taper shank type |
BT50 |
||
|
Spindle motor |
kW |
22/26 |
|
|
Maximum torque |
Nm |
2000 |
|
|
Maximum speed |
rpm |
2000 |
|
|
NC turntable |
Working table |
m |
1200×1400 |
|
Position |
" |
±8 |
|
|
Repeat Position |
" |
±4 |
|
|
Max load |
Kg |
3000 |
|
|
trip |
X-axis travel |
mm |
1600 |
|
Y-axis travel |
mm |
1200 |
|
|
Z-axis travel |
mm |
1200 |
|
|
W axis travel |
mm |
600 |
|
|
Feed rate |
Workbench horizontal (X) |
mm/min |
2-6000 |
|
The vertical headstock (Y) |
mm/min |
2-6000 |
|
|
Vertical column (Z) |
mm/min |
2-6000 |
|
|
Boring shaft axial (W) |
mm/min |
2-2000 |
|
|
Fast-moving speed |
Workbench horizontal (X) |
mm/min |
15000 |
|
The vertical headstock (Y) |
mm/min |
15000 |
|
|
Vertical column (Z) |
mm/min |
15000 |
|
|
Boring shaft axial (W) |
mm/min |
3000 |
|
在线联系供应商
Other supplier products
 |
VMC-SERIES VERTICAL MACHINING CENTER | VMC-series Vertical Machining Center is mainly suitable for processing complex parts such as plates, discs, molds, and small shells. The vmc vertic... |
 |
HMC-S HORIZONTAL MACHINING CENTER WITH PALLET CHANGER | DEED horizontal machining center with pallet changermainly used for the processing of box, shell, and special-shaped parts in automobiles, motorcyc... |
 |
HBP Series Planer Type Milling and Boring Machine | The X/Y/Z servo axis adopts the servo motor direct connected precision planetary reducer to drive the large-diameter, high-precision double nut pre... |
 |
CNC DIE MAKING MACHINES | Choose Faster throughput, finer surface treatment, and lower cost cnc die making machine from Deed CNC. Faster speeds. Advanced completion for CNC... |
 |
HORIZONTAL TURNING CENTER SPECIAL FOR WHEEL HUB | The horizontal turning latheadopts "mineral casting" material and technology of Germany, which guarantees DEED CNC machine tool with better perform... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
