Apollo BK Three-chuck Tube Laser Cutting Machine 1000w-6000w

Remcor Apollo BK series three chuck tube lazer cuttingmachine can cut all types of metal tubes, from mild steel to stainless and also non-ferrous metals. It is also valid for cutting some reflective metals like aluminum, brass and copper, etc. The thickness of the metal can be anywhere up to 30 mm. The diameters can be up to Ø 350mm tubes. Can cut different shapes on the surface of square tubes, oval tubes, U tubes or rectangular tubes or other special shape tube products. The most outstanding feature of our BK system is that can realize the real Zero-tailing cutting. And our automatic loading system freedom operator from the hard and heavy pipe loading problem.

Apollo BK Three-chuck Tube Laser Cutting Machine 1000w-6000w Features

Different shapes & Different sizes

Max weight

600kgs load and unload maximum length up to 12M.

Raw material waste

Unique 3 chucks technology, zero tailing, high pipe utilization Average material can reduce up to 30%.

Labor cost

Real time, high precision, fast troubleshooting servo motor control automatic and semi load can be chosen.

Environment pollution

Dust collection box included full sealing chuck to prevent dust into chuck to have a longer lifetime.

Low efficiency

Apollo BK Three-chuck Tube Laser Cutting Machine 1000w-6000w Parameter Details

Item	6020-BK	7025-BK	9025-BK	9034-BK
Power range	1500-6000W
Chuck structure	3 chucks
Tube size	Round Type: Φ15-200mm	Round Type: Φ15-245mm	Round Type: Φ15-245mm	Round Type: Φ15-330mm
	Square Type:15-140mm	Square Type:15-175mm	Square Type:15-175mm	Square Type:15-230mm
Positioning accuracy of x& y	±0.05mm/m
Max positioning speed x&y	100m/min			80m/min
Max cutting length	6000mm	7000mm	9000mm	9000mm
Tail length	≥ 0mm
Max weight single tube	135KG	260KG	260KG	500KG
Max loading length	6000mm	7000mm	9000mm	9000mm

Fully Annealed Table

The bed body adapts the segmented rectangular tube welding bed with fully annealed treatment at over 600⁰. After tempering, the strength, rigidity and stability are guaranteed, the precision would be tested and debugged which can make sure the precision can be maintained for a long time. The table is equipped with automatic lubrication device, which ensure the moving parts operate in good condition and improve the service life of guide rails, gears and rack.

Follower Support

The follower support device will be optional. The follower support is mainly to assist in controlling the excessive deformation of cutting longer pipes (pipes with smaller diameter), and the servo motor drives the up and down movement of the pallet assembly. When the chuck moves to the corresponding position, the auxiliary support automatically drops for avoidance.

Smart Auto Focus Laser Head

Standard auto focus function, no need focus adjustment while changing sheet; Automatic tracking and accurately adjusting the focus according to the material thickness to ensure the best cutting effect of the whole board. Shorter perforation time, better perforation quality, high-speed cutting, saving time.

Intelligent CNC Operating System

tube laser cutting machine intelligent cnc operating system

It simplifies complex CNC machine operation and integrates CAD, Nest and CAM modules in one. From drawing, nesting to workpiece cutting all can be finished by a few clicks on big IPAD Screen. Realize the intelligent diagnosis, multi-threading operation, three-level perforation, laser energy control, adaptive edge-finding, automatic corner acceleration and deceleration, flight cutting, switching worktables, mechanical accuracy compensation etc.

Pneumatic Clamp Chucks

Pneumatic clamp design on both sides. The dual-chucks help reduce tube vibration to a minimum, guaranteeing high accuracy in even complex tube configurations at high cutting speed. Suitable for cutting a range of tube diameters from Ø20 mm to Ø220 mm and various wall thicknesses.

Front chuck

tube laser cutting machine front chuck

Back chuck

tube laser cutting machine back chuck

Fractional Automatic Support Technology

Applies the intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.

Equipped with two sets of variable-diameter support structures, which are automatically lifted by the cylinder to avoid the rear chuck in processing. When processing profiles with different diameters, manually turn the variable-diameter wheels to achieve fit and support for different-sized profiles. The variable-diameter wheels It can be supported every two degrees of rotation to reduce the diameter of the circumscribed circular tube by 2mm

We can offer kinds of 3kw laserfor sale, and the 3kw fiber laser priceis reasonable, if you have needs to buy high quality 3000w laser cutting machine, please contact us.

If you are looking for a reliable metal laser cutter factory, please choose us, and we will be your best partner.

Other supplier products

	Coil Sheet Laser Cutting Machine	The coil laser cutting machinecombines with the de-coiling system, leveling system and laser cutting system. It's suitable to process the multi sha...
	Pluto ND Enclosed Type Laser Cutting Machine 1000w-6000w	Pluto ND series fiber laser cutting machine USAis a compact, versatile and productive 2D laser cutting machine system that delivers high efficiency...
	Pluto UD Enclosed Type Laser Cutting Machine 10000w-30000w	PLUTO UD high power series laser cutting machine is mainly designed for super-fast speed cutting and extra thick metal plate cutting. Apply with th...
	Panel Bender	Panel Bender As one of the panel bendermanufacturers in China, Remcor panel bender for salecan realize automatic bending, compared with a traditio...
	Apollo AK Two-chuck Tube Laser Cutting Machine 1000w-6000w	Remcor technology is a global supplier for the turnkey fiber laser cutting lines, which have around 18 years experiences, 5000 sets installations g...

供应产品

Same products

	GT-FM24-PLC填粉机机(3+9+9+3)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing	卖方: Eurion Automation Co., Ltd.	高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ...
	GT-FM18-PLC灌装机(8+2+8)三导管	卖方: 肇庆古雷特科技有限公司	* 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一...
	48工位填粉机 GT-FM48	卖方: 肇庆古雷特科技有限公司	* 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机...
	8工位填粉机 GT-FM8	卖方: 肇庆古雷特科技有限公司	* 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装...