KRD16 High Impact Shock Test System
KRD16series shock test system is a standard testing equipmentstipulated by the high impact shock test method and meets MIL-S-901D standard which covers shock testing requirements for shipboard systems, equipment, machinery, and structures. The high-impact shock resistance testsystem is designed to verify the ability of shipboard installations to withstand shock loadings which may be incurred during wartime service due to the effects of underwater explosions, bump impacts, close range shots, air explosions, train coupling loads, etc. It can not only perform shock assessment tests on ship equipment in accordance with military standard requirements but also can be used to test and study the shock performance of various shock absorbers and structures. It played an important role in improving the shock resistance of ship equipment.
FEATURES OF KRD16 HIGH ENERGY SHOCK TEST SYSTEM
CMEprovides lightweight & medium weight high impact testing equipmentin accordance with one of the following test categories, as specified.
Medium weight.The medium-weight test is a test performed on the medium-weight shock machine. The weight of the test item including the fixture to attach it to the test machine shall be less than 3357kg (7,400 pounds).
TABLE OF KRD16 HIGH IMPACT SHOCK TEST SYSTEM
The lifting mechanism is used to raise a heavy hammer to a predetermined height and then make it fall freely, and hit the cutting board on which the specimen is installed, so that the specimen bears a complex shock load, thereby determining the specimen's ability to withstand shock.
The lifting system is composed of an electric-reduction unit, high-strength chain, hook, rotating arm, vertical guide track, vertical limit lever, swing hammer angle indicator plate, etc.
Two shock hammers (horizontal hammer and vertical hammer) that can move in different directions enable the equipment to easily realize three-directional shock motion.
在线联系供应商
Other supplier products
 |
WHAT IS PACKAGE TESTING? | Package testing or packaging testing involves the test and measurement of a characteristic or property involved with packaging. This includes packa... |
 |
KRD200 Center of Gravity Measurement System | The center of gravity (CG) (or center of mass) of an object is the average location of the weight (or mass). It's a crucial mass property in the fi... |
 |
KRD300 MOMENT OF INERTIA MEASUREMENT SYSTEM | Mass Moment of Inertia (Moment of Inertia) is a measure of an object's resistance to change in rotation direction. Moment of Inertia has the same r... |
 |
KRD100 Incline Impact Tester | KRD100series incline impact tester is a testing machine that evaluates the ability of loads to withstand inclined impacts or crushing forces due to... |
 |
KRD61 6-DOF Test Table | KRD61 series 6 DOF testtable is six-degree-of-freedom multi-functional closed-loop servo motion simulation test equipment. It is applied to provide... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
