STORAGE TANK PAINT
In the petrochemical industry, special working environments such as high temperature and corrosive media can make corrosion more serious. The consequences of corrosion are also more serious, such as the leakage of toxic and harmful substances and flammable and explosive substances, so the corrosion protection of chemical equipment is very important. The basis for the matching selection of anti-corrosion coatings for storage tanks is ISO 12944. According to various factors of environmental conditions and requirement of the service life, the matching varieties and film thickness of storage tank coatings are determined. According to the specific medium in the storage tank, it is necessary to discuss with the paint supplier and determine the suitable storage tank coatings variety and anti-corrosion solution for the inner wall of the storage tank.
Anticorrosive paint system
Anticorrosive paint system for outer wall of storage tank
The corrosion of the outer wall of the storage tank is mainly atmospheric electrochemical corrosion in the chemical atmosphere. At present, the most commonly used heavy-duty anticorrosive paint system is an epoxy zinc-rich primer or inorganic zinc silicate primer/epoxy mica iron oxide intermediate paint / acrylic polyurethane topcoat / novolac coating. According to the different corrosive environment of the storage tank, the dry film thickness is 200-300μm. The dry film thickness of epoxy zinc-rich primer is usually not less than 50μm. If the inorganic zinc silicate primer is used as the anti-rust primer, a sealant paint must be applied to it. Polysiloxane paint has outstanding weather resistance and can be applied in high-thickness films. Using polysiloxane paint as topcoat, only two coats of paint are required for construction, saving the construction man-hours and material costs of the intermediate coat.
Anticorrosive paint system for inner wall of storage tank
The corrosive environment within the storage tank is mainly the medium stored in the storage tank. The oil itself, whether it is crude oil, semi-finished oil or refined oil, is not corrosive, but the corrosive impurities such as inorganic salts, acids, sulfides, oxygen, and water in the oil will corrode the inner wall of the tank. The fuel storage tank paint for the inner wall of the oil tank are first required to have good corrosion resistance, good solvent resistance, and not pollute the medium in the storage tank. In order to store oil safely, it is also necessary to use anti-static oil tank paint. The service life of the coating system on the inner wall of the storage tank is closely related to the steel condition of the inner wall of the storage tank and the selected coating material. According to the coating thickness, the storage tank coatings types of the inner wall can be divided into three categories: thin coating, heavy anti-corrosion coating, and glass flake/fiber-reinforced lining.
Thin coatings mainly include pure epoxy coatings and phenolic epoxy. The dry film thickness of each coating is controlled at 100-150μm, and the total film thickness is 300μm.
Heavy-duty anti-corrosion coating layer mainly refers to low-solvent and solvent-free epoxy coatings, including solvent-free glass flake coatings, with a design dry film thickness of 500-1000μm.
Glass flake paint or glass fiber reinforced lining, with a dry film thickness of 1000-1500μm, mainly including epoxy glass flake paint, vinyl ester glass flake paint, polyester glass flake paint, and solvent-free epoxy glass fiber reinforced lining and etc.
We are the protective coating manufacturer, we provide china intumescent paint, storage tank coatings, water tank coatings interiors, Storage Tank Paint, storage tank painting, heat resistant paint for water tank, fuel storage tank paint, waterproof paint for metal water tanks, Oil Tank Paint, marine grade paintand etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
Non-Toxic Epoxy Anticorrosive Paint | Nontoxic EpoxyAnticorrosive Paint is a two-component epoxy anticorrosive paint,and the product meets the drinking water hygiene standards. Non toxi... |
 |
Underwater Curing Epoxy Coating | Underwater Curing EpoxyCoating Underwater paintare two-component, formulated with special resins, extender pigments, fillers and curing agents. It... |
 |
DRINKING WATER TANK PAINT | Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It has proved that the cement slurry is very brittle ... |
 |
Asphalt Antifouling Paint (for ships) | Asphalt antifouling coatingis one component, it is formulated with asphalt, solvent, extender pigment and additives. It has excellent water resista... |
 |
FUXI ® ASPHALT ANTICORROSIVE PAINT | Under FUXI® brand, Jinhai Special China Coatingshas developed our own formulation system, including epoxy, phenolic, alkyd, acrylic, silicone, ... |
Same products
 |
GT-FM24-PLC填粉机机(3+9+9+3)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
High Speed Flat Wire Coil Winding Machine for EV Traction Motor Manufacturing | 卖方: Eurion Automation Co., Ltd. | 高精度伺服控制系统：采用工控级电脑控制平台，配套进口伺服电机与减速机，确保运行高效、精准、稳定。 六轴联动结构设计：送线轴、绕线轴、排线轴及手臂成型轴独立控制、协同配合，实现多工序复合成型。 ... |
 |
GT-FM18-PLC灌装机(8+2+8)三导管 | 卖方: 肇庆古雷特科技有限公司 | * 描述 GT-FM-PLC（6-48工位三导管）氧化镁粉灌装机，是在GT-FM-PLC（6-48工位双导管）的基础上改进而成。 双导管灌装机与三导管灌装机的主要区别如下： 三导管灌装机可以在一... |
 |
48工位填粉机 GT-FM48 | 卖方: 肇庆古雷特科技有限公司 | * 描述FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装机... |
 |
8工位填粉机 GT-FM8 | 卖方: 肇庆古雷特科技有限公司 | * 描述 FM灌装机适用于长长度、不同直径的管式加热器的灌装。 FM填充机填充的加热器具有高密度，根据直径、氧化镁粉末、填充速度，密度可达2.3g/cm3。 FM灌装机有双导管灌装机和三导管灌装... |
