Sucker Rod Centralizer
Sucker rod centralizeris a kind of downhole toolswhichis pumping wellanti-abrasion, it is especially suitable for pumping well and directionalwell whcih above of sucker rod middle point,under the middlepointof sucker rod , the rod body with nylon centralizer is works better.
The sucker rodmoves up and down in the tubing, due to the elastic deformation of sucker rod, rod and oil tube wall is easy to makefriction, ti makes sucker rod break off easily, sucker rod centralizer has strong flexibility, touchedwith the tubingwall can reduce the friction of rod and tube, and can be increase production life of pumping unit.The centralizer is connected with sucker rod , the outsid diameter of centralizer is bigger than coupling outer diameter,so that can make the function of centralize. Thecentralizer is made ofhigh strength wear-resistant material, andtouched with the tubingtoreduce the abrasionto achieve the purpose of anti-abrasion.
CHEMICAL COMPOSITION
Process Sucker Rod Centralize:
- ℃.
- ℃hot air, making its humidity less than 0.1%.
- ℃, and the mold temperature of the processed HTN53G50HSLR is 100℃.
- ℃, plasticizing area one temperature is 285 ℃,plasticizing area two temperature is 275 ℃, plasticizing area three temperature is 260 ℃, injection pressure is 110 bar, flow is 90 cc/min.
PA66
|
Item |
Specification |
Technical Requirements |
PA66 |
|
1 |
Testing Item |
Smooth and Without Damage |
Smooth |
|
2 |
Bending StrengthMpa |
≧103 |
|
|
3 |
Notch Impact Strength |
≧13 |
|
|
4 |
Friction Coefficient μ |
≦0.018 |
|
|
5 |
Heat Distortion Temperature ℃ |
≧180 |
|
|
6 |
Wear Volume Loss g/cm³ |
≧0.073 |
|
|
7 |
Density kg/cm³ |
||
|
8 |
Tensile MPa |
||
|
9 |
Compactness |
1500 |
PPA Resin
|
Item |
Specifications |
Technique Data |
PPA Resin |
|
1 |
Appearance |
Smooth and Without Damage |
Smooth |
|
2 |
Bending StrengthMpa |
≧103 |
|
|
3 |
Notch Impact Strength |
≧13 |
13 |
|
4 |
Friction Coefficient μ |
≦0.018 |
|
|
5 |
Heat Distortion Temperature ℃ |
≧180 |
|
|
6 |
Wear Volume Loss g/cm³ |
≧0.073 |
|
|
7 |
Density kg/cm³ |
||
|
8 |
Tensile MPa |
||
|
9 |
Compactness |
1500 |
Found PetroleumEquipment Co., Ltd.Mill Test Certificate:
|
Product |
Centralizer |
Pcs |
2 |
Delivery |
Certidicate No. |
F20150116 |
|||||||
|
Company |
Found Petroleum Equipment Co., Ltd. |
Contract No. |
/ |
||||||||||
|
/ |
Specification |
API 10D |
|||||||||||
|
Aperance Testing |
|||||||||||||
|
Size |
Pcs |
Outside Diameter |
Inner Diameter |
Length |
|||||||||
|
7/8" |
1 |
58mm |
7/8" |
200mm |
|||||||||
|
7/8" |
1 |
58mm |
7/8" |
200mm |
|||||||||
|
Tensile test |
|||||||||||||
|
Material |
Standard Value |
Temperature- resistance |
HRC |
Impact Strength |
Compressive Strength |
||||||||
|
0℃-200℃ |
M85-M114 |
70-100Mpa |
|||||||||||
|
HTN51G35HSLR |
Measured Value |
176℃ |
93 |
92 |
|||||||||
|
HTN53G50HSLR |
Measured Value |
187℃ |
98 |
88 |
|||||||||
在线联系供应商
Other supplier products
 |
Sucker Rod Centralizer | Hot sale various high quality Grade D Sucker Rod and 1" Grade D sucker rod from China leading manufacturer. Our products are efficient, cost effect... |
 |
Progressive Cavity Pump | Progressive Cavity Pump |
|
|
Sucker Rod Centralizer | Sucker rod centralizeris a kind of downhole toolswhichis pumping wellanti-abrasion, it is especially suitable for pumping well and directionalwell ... |
 |
Sucker Rod Pump | Specifications for Tubing Pumps: Insert Pumps The insert pump can be connected to sucker rod on the surface and then lowered into the wells i... |
 |
API AISI 4140 Polished Rod | Polish rodis a kind of special sucker rod connected with sucker rod and beam hanger. It is at the top of sucker rod,need to bear the most strength,... |
Same products
 |
XD-MAX Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-MAX Winch for Drone The XD-MAX Winch for Droneis a high-performance aerial lifting solution d... |
 |
XD-55 Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-55 Winch for Drone Introducing the XD-55 Winch for Drone—an advanced lifting system eng... |
 |
XD-10 Winch for Drone | 卖方: NEW WING ADVANCED (TIANJIN) TECHNOLOGY CO., LTD | XD-10 Winch for Drone SAFE, EFFICIENT AND CONVENIENT.Your reliable and intelligent air transport... |
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | 卖方: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | 卖方: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
