2 Part Bi-Component Ab Part Silicone Epoxy Polyurethane Glue Potting Machine
ab glue mixing and dosing machine
Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.
We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .
General description of the machine
our ab dosing dispensing machine precisely metering, mixing and dispensing two-component medium to low-viscosity materials for potting, dispensing ,sealing, casting ,encapsulation and filling.
For variable ratio dispensing, the system handles ratios from 1:1 to 10:1.
The system is composed of AB tanks, metering pumps and motor, mixing pipe, dual valve, dynamic motor for dynamic stirring and 3-axis robotic platform.
Two kinds of component materials are separately before they mix in mixing tube to avoid glue cure in system. Dispensing valve is with suck-back function to keep thin fluid from dripping.
Introduction :
1. Working Mode: controlled by PLC module and MCGS touch screen.
2.High precision valve: high speed, glue off clean, no glue drawing, no dropping.
3. Core metering pump specially design for different material from low to high viscosities.
4. Mix glue A & B more evenly; no more or no less for agent B.
Working principle :
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
Working principle :
Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
Tank system technology:
1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .
1. Stainless panel vacuum pressure tank which can bear negative pressure of inner tank .
2. Tank with motor stirrer that prevent the glue from sediment and keep the potting material in constant temperature.
3 Tank with top/ high /low liquid sensors that ensure alarm warning when liquid higher or lower the setting level .
4 Tank with vacuum degas (degas time can be set through touch screen), so the material can be re-feeding through vacuum negative pressure .
5 Tank with pressure releasing ball valve ; the bottom of tank reserved back-flow connector and river closure ball valve.
6 Tank with heater which can preheat materials to assure good flowability .
6 Tank with heater which can preheat materials to assure good flowability .
7 Tank with artificial feeding mouth that can be added glue appropriately by hand . 8 Tank with silica-dryer which can prevent material especially PU from crystallization .
our Pump technology
1. Two cylinder plunger pumps work by durable motors.
2.The biggest flow volume :24g/s,Repetition accuracy:0.2g.
3.Also Suitablefor high viscosity glue: 50cps~35000cps.
4. Suitable for big flow dispensing or slight flow dispensing.
5. Suitable for frequent start and stop dispensing.
6. Anti-wear, Anti-corrosion, super long life time.
Valve technology
1. Dynamic mixing with stirring detecting function that ensure glue mixing evenly .
2 Stainless design of the glue touch surface to capture more higher material compatibility .
3 Glue valve with flow-back prevent function that can prevent glue from dropping when stop gluing .
4 Sealing parts of rod shaft adopt imported parts to keep more higher durability .
5 The self-cleaning function make machine cleaning more easier that you needn't dis-assembly the parts to wash . Cleaning time and cleaning times could be set in the touch screen.
PLC Operation Controlling System
1 Dispensing volume is controlled by the speed of pump's motors ; Glue speed adjustable within the speed range .
2 Machine with
detecting function that detect the speed and running time of pumps to ensure the ratio reliability.
3 Adjustable gluing-out volume make sure glue A/B dispense out at the same time from glue valve to get better glue mixing effect .
4 Machine with gel resistance calculator , which prevent the mixture curing inside .
5 You can set single gluing-out and steady gluing-out function to meet up with your different process requirement .
6 Whole machine system and function is controlled by Panasonic PLC and MGCS touch screen .
7 Reserved PLC communication interface, which easy connecting with outside device .
8 Equipped with a safety lock to prevent staff from wrong operation ..
detecting function that detect the speed and running time of pumps to ensure the ratio reliability.
3 Adjustable gluing-out volume make sure glue A/B dispense out at the same time from glue valve to get better glue mixing effect .
4 Machine with gel resistance calculator , which prevent the mixture curing inside .
5 You can set single gluing-out and steady gluing-out function to meet up with your different process requirement .
6 Whole machine system and function is controlled by Panasonic PLC and MGCS touch screen .
7 Reserved PLC communication interface, which easy connecting with outside device .
8 Equipped with a safety lock to prevent staff from wrong operation ..
Application
1.Potting&Encapsulation &Casting:electronics componnets , PCB board, Capacitor, power supply, transformer, ignition coil, reversesensor, circuit board, filter products ,underwater parts, electronic ballast ,aviation parts, aerospace parts....
2.Dispensing&Dosing :LED strip , led lamp , led bulb , aluminum,led screen , display module ,medical parts,medical liquid filling....
3.Bonding&doming :LCD screen ,LOCA bonding,ABS plastic,different types of stickers , badge , keychains , souvenirs ,arts ,photo frame , and other arts graphics....
在线联系供应商
Other supplier products
 |
Fully Automatic Laminating Pouring Machine for Single Operator Can Complete Glue Spraying | Fully Automatic Laminating Pouring Machine for Single Operator Can Complete Glue Spraying The glue Spraying line is based on the reform of the t... |
 |
Ab Component Two Part Glue Dispensing Potting Epoxy Silicone PU Resin Machine | ab glue mixing and dosing machinePotting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compoun... |
 |
AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy resin potting machine 2 Part Silicone plyurethane epoxy dosing and dispenser potting machine | AB glue meter mix dispensing machine/automatic glue potting machine for LED driver automatic epoxy resin potting machine 2 Part Silicone plyure... |
 |
Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Door | Glue Spraying Machine for Insulation Integrated Board Production Line MGO Panels Fire-Proof Door The glue Spraying line is based on the reform o... |
 |
Дозирование 2к материалов | Дозирование 2к материалов KPD- производитель оборудования для дозирования и смешивания полиуретанов, силиконов, эпоксидов, клеевых составов и др. ... |
Same products
 |
JX50D China CNC Machine Tools | 卖方: Taizhou Yestar Intelligent Equipment Co.,Ltd | China CNC Machine Tools List 1. Servo Hydraulic Turret: Compact design with a small footprint, h... |
 |
Sewing Machine Spare Parts | 卖方: Jinzen Intelligent Technology (Dongyang) Co., Ltd. | Sewing Machine Spare Parts B2001-771-0A0 LBH-780 One of the key features of our spare parts is t... |
 |
钢轨磨耗测量尺 | 卖方: 842518 | LJ-GM系列数显式钢轨磨耗测量尺用于测量钢轨垂直磨耗和侧面磨耗量。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
 |
道岔尖轨侧磨量及降低值检测尺 | 卖方: 842518 | 尖轨是转辙器中的重要部件，依靠尖轨的扳动，将列车引入正线或侧线方向。随着铁路运输不断向高速化和重载化方向发展，加速了道岔尖轨的磨损和报废，特别是尖轨的侧磨较为严重，要经常测量尖轨的磨耗状态，给出... |
 |
滑动式钢轨磨耗尺 | 卖方: 842518 | LJ-HGM系列滑动式钢轨磨耗测量尺用于测量钢轨垂直磨耗值，侧面磨耗值和尖轨降低值。釆用数显读数，合理的设计使它具有重量轻、操作方便、读数直观的特点。 |
