Palm Oil Wastewater
Palm Oil Wastewater
Palm oil is not only the highest yielding cheap vegetable oil on the earth but also a safe raw material for edible oils and daily chemicals, and a raw material for biofuel.
As a raw material for edible vegetable oils, chemical raw materials and biofuel, palm oil has attracted worldwide attention in the process of ecological protection and industrial pollution. As a result, palm oil wastewater treatmentalso receives much attention.
Palm oil mill effluent (POME)is a yellow liquid with a unique unpleasant smell and comes from oil extraction, cleaning and washing process in the POME factory, which is featured with very high COD and BOD.
Due to its acidic nature (pH 3.4–5.2), high salt and suspended solids, oil and grease, the untreated discharge of POME can result in considerable environmental consequences.
Each ton of palm oil produced emits about 20 tons of high-concentration organic wastewater. When the high-concentration organic wastewater per ton is treated according to the current sewage pond treatment method, it is equivalent to emitting more than 210 million tons of carbon dioxide gas into the atmosphere every year. It's important to solve the problems in palm oil mill effluent treatment.
To achieve environmental requirements and economic challenges, the POME factories are trying to get efficient and return on the investment process.
JIUWU HITECHhas made a lot of studies and many rich experiences for POME treatment since 2012.
JIUWU HI-TECH offers the solution for POME treatment with an integrated ceramic membrane technology which is a green, friendly environment, economic efficiency and has the following technical benefits:
No discharge of wastewater
Low capital investment ;
Low operation cost;
Oil is concentrated and water is recycled
After integrated process filtration, concentrate including surplus sludge from anaerobic and centrifuge is used as fertilizer for cattle farm and purified water can be used for recycling or the bolier feed water due to salts and organic compounds are removed.
If you are looking for a reliable ceramic membrane factory, please choose us, and we will be your best partner.
在线联系供应商
Other supplier products
 |
Organic Membrane Machine Lab & Pilot | In order to meet the scientific requirements of scientific research institutes andenterprises in the early research and development of feed liquid ... |
 |
Organic Membrane | The organic membrane is a material having a selective separation function, and when there is a driving force on both sides of the membrane (such as... |
 |
RO Membrane Technology | Reverse osmosis (RO) is a water purification technology that uses a semipermeable membrane to remove ions, molecules, and larger particles from dri... |
 |
Ceramic Membrane | Ceramic membranes (Porous Ceramic Membrane& tubular ceramic membrane) are available for microfiltration, ultrafiltration and nanofiltration as ... |
 |
Organic Membrane Machine Lab & Pilot | In order to meet the scientific requirements of scientific research institutes and enterprises in the early research and development of feed liquid... |
Same products
 |
Uratech ER16 Collet Rack – CNC Collet Storage for ER, DR & RD 16 Series | 卖方: Uratech USA Inc | TheUratech ER16 collet rackis a premium storage solution designed for CNC shops, toolrooms, and m... |
 |
Uratech Tool scoot cart for 50 taper tool holders | 卖方: Uratech USA Inc | Maximize efficiency in your machining operations with our50 taper CNC tool carts, the ultimate so... |
 |
3 in1 Decoiler Leveler Feeder | 卖方: Dongguan YouYi Precision Automation Equipment Co., Ltd. | 3 in1 Decoiler Leveler Feeder For Thin Plate（0.3-3.2mm） The 3-in-1 servo feederintegrates four f... |
 |
NC Servo Feeder (0.1-3.0mm) | 卖方: Dongguan YouYi Precision Automation Equipment Co., Ltd. | NC Servo Feeder (0.1-3.0mm) Our standard servo feederis engineered for precision coil feeding of... |
 |
Uratech 40 Taper CNC Tower – CAT 40 Tool Cart & CNC Tool Holder Storage | 卖方: Uratech USA Inc | TheUratech 40 Taper CNC Toweris the ultimate solution for organizing and protecting your CNC tool... |
