CNC Fiber laser cutting machine LF3015GAR
LF3015GAR (6m tube) with pipe cuttingMain Configuration
Fiber Laser Source
* Details: 100,000 hours life time,more stable, cost-efficient, free maintenance.
Control System- CYPCUT
* Auto edge seeking function, flying cutting function and nesting function.
* Support AI, BMP, DST, DWG, DXF, DXP, LAS, PLT,NC,GBX etc...
* More flexible to operate---after finishing making design by drawing software such as Solidworks, CAD, Then operator can put the design into CYPCUT control system for cutting directly and no need any programming, and transfer to code.
Double Air Chuck
Quick change pipes, auto finding center of gravity.
Large diameter:φ15-220
Laser Head:
* Brand: Swiss Raytools auto-focus laser head
* Advantages:
--High Presicion: Without manuel, zero fault.
--High Effectiveness: Without manuel,Save time
--High Safty: Anti-collision design, height adjustment high sensitivity
Aviation Aluminum Gantry
* It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries.
* Advantages: Good toughness, light weight, corrosion resistance, anti-oxidation, low density, and greatly increase the processing speed.
* Comparison:
--Steel Gantry: 280kg;
--Cast aluminum Gantry: 180kg;
--Aviation aluminum Gantry: 138kg.
With a light weight, it will greatly increase the processing speed.
The Segmented Rectangular Tube Welded Bed
* Structure advantage:
The internal structure of the bed adopts the aircraft metal honeycomb structure, which is welded by a number of rectangular tubes. Stiffeners are arranged inside the tubes to increase the strength and tensile strength of the bed, it also increases the resistance and stability of the guide rail so as to effectively avoid the deformation of the bed.
* For material : Through 600℃ heat treatment to keep stronger and more solid
* Feature: High strength, stability, tensile strength, ensuring 20 years of use without distortion; Thickness of rectangular sheet wall is 14mm；weights 8000kg.
WIFI Remote Control System
By this function, we could remote control your computer and machine to guide you install/operate or find/solve problem once you meet difficulty in several min.
Gear and Rack - Taiwan YYC
* High precision, long life, can provide rigorous support for quenching helical gears and grinding helical gears, so that the load drive structure is compact, can effectively reduce the driving torque.
Servo Motor-Japan YASKAWA
* Y axis: two sets 1.8kw Japan YASKAWA servo motor and driver.
* X axis: one set 850w Japan YASKAWA servo motor and driver.
* Z axis: one set 750w Japan PANASONIC servo motor and driver.
Higher power of motor and drive makes higher moving speed for laser head.
Reducer - France Motor Reducer
Effectively decrease the speed of beam, make cutting and machine more stable to keep machine life long work.
Electronic Components - France SCHNEIDER
* Circuit protection against short-circuit currents, Circuit protection against overload currents,Breaking and industrial disconnection as per standards IEC/EN 60947-2.* Overvoltage resistance, High performance limitation to fast closing independent of the speed of actuation of the toggle.
Square Rail-Taiwan HIWIN (flange type)
* Low noise, wear-resistant, smooth to keep fast Moving speed of laser head.
* 35mm width and 165 four pieces stock on every table to decrease the pressure of rail.
Pneumatic Components - Japan SMC
* Stepless control of air pressure proportional to an electrical signal.
* Serial communications specifications.* Compact/lightweight (Integrated communication parts).
Bearing - Japan NSK
* These bearing housings have square flange which can be easily attached to a machine with four bolts.* With its simple mounting face, this bearing unit is widely used.
Automatic Rail Lubrication System
We can set the adding oil's frequency and quantity by adjusting the relevant parameters on computer, so it largely improve the machine's lifetime, save manpower.
在线联系供应商
Other supplier products
 |
Hydraulic CNC Press Brake WE67K-100/3200 DA66T | Machine introduction: WE67K-100/3200 DA66T Servo Motor hydraulic press brake machine for sale WE67K series CNC servo drive electrical-hydraulic pre... |
 |
Press brake machine hydraulic | Press brake machine hydraulic The machine features hi-accuracy,hi-speed and energy saving by 40% The servo motor drives the hydraulic pump.Electro... |
 |
20T Conventional Heavy Duty Lathe Machine Horizontal Lathe | Main Features: This series lathe guideway width is 1100mm, and max. loading weight between two centers can get to 10T. These lathes can perform t... |
|
|
CNC Fiber laser cutting machine LF3015GAR | LF3015GAR (6m tube) with pipe cuttingMain Configuration Fiber Laser Source * Details: 100,000 hours life time,more stable, cost-efficient, free m... |
 |
QC11Y/K Series Hydraulic Guillotine Shearing Machine | QC11Y/K Series Hydraulic Guillotine Shearing Machine The second generation of shear.2.Welded steel plate construction, heating to eliminate stre... |
Same products
 |
GT-FF24 快速填粉机 | 卖方: 肇庆古雷特科技有限公司 | * 产品说明 GT-FF24 型快速填粉机采用单立柱单管结构。 本机优势：导管内氧化镁粉料装载量大，灌粉速度快；配备减速电机驱动导管升降机构。 设备搭载PLC 触摸屏 + 编码器控制系统，灌粉... |
 |
GT-FMDO 双柱填粉机 | 卖方: 肇庆古雷特科技有限公司 | *产品说明 GT-FMDO 双柱填粉机是电热管厂家广泛选用的主流机型，专用于管状电加热元件的氧化镁粉料填充作业。 *主要参数与特点 1. 中部导轨升降传动，设备运行作业平稳； 2. 机身... |
 |
Смесительно-дозирующая машина – точность и стабильность в каждом цикле | 卖方: 824681 | Смесительно-дозирующая машина – точность и стабильность в каждом цикле Высокоточное дози... |
 |
GT-SW30 单头管拍机 | 卖方: 肇庆古雷特科技有限公司 | • 产品描述 GT-SW30 单头管拍机是专为多规格、小批量工业加热元件生产而设计。它可生产高密度的筒式加热器和双端管状加热器，并具有更换模具简便快捷的特点。 • 主要细... |
 |
SW01 圆管拍机 | 卖方: 肇庆古雷特科技有限公司 | • 产品说明 GT-SW01 型锻机主要用于热流道加热器的减径加工。此设备适用于小直径圆棒状加热器的减径加工。 • 主要特点 1. 可对加热器进行减径加工，提高材料密度... |
