5kN Universal Testing Machine丨5kN Universal Tester
Product Introduction
This series of testing machines realizes the automatic control of the test process, data acquisition and analysis through the computer, and realizes the full digitization and automation of the data acquisition, analysis and control process. The control and data processing software with WINDOWS as the operation interface realizes the computer display of test force, test force peak value, beam displacement, test deformation and test curve. The good humanized design makes the test operation easier. The machine can realize three closed-loop control of test force, deformation, and displacement, and can smoothly switch between control modes such as constant stress, constant strain, and constant displacement. It is widely used in industries such as waterproofing membranes to detect and analyze the mechanical properties of non-metallic and composite materials. It is an ideal testing equipment for scientific research institutions, universities, industrial and mining enterprises, technical supervision, quality inspection and other departments.
Standards Compliant
Manufactured according to GB / T2611 "General Technical Conditions for Testing
1. Manufactured according to GB / T2611 "General Technical Conditions for Testing Machines"
and GB / T 16491-2008 "Electronic Universal Testing Machine" standards;
2. Perform verification and acceptance according to GB / T12160 "Regulations for
Extensometer for Uniaxial Test" and GB / T16825 "Inspection of Tensile Testing Machine"
3. Applicable standards: apply ASTM D5034/D5035. ASTM D5587. DIN, ISO13934-1. JIS, BS and
other international standard
Product Structure Function
This series of testing machines are of single-arm structure.
1. This series of machines adopts AC servo motor and servo drive speed control system to drive the precision ball screw pair to move up and down, and then realize the wide range of stepless adjustment of the test speed, ensuring the high precision, low noise and high stability of the test process.
2. The test control system has the advantages of high integration, stable performance and convenient adjustment. The experimental data can be collected in real time, and the experimental characteristic curve can be dynamically displayed in real time. The experimental data files can be saved in the way of Access common databases, which is convenient for the realization of customer resource sharing and network management, as well as user re-analysis. For user-defined various word2000 reports, the software can be easily accessed, which solves the problem that different users or the same user have different needs for test reports in different periods. The software can process the original data of test force, displacement, time, deformation and curves derived therefrom.
3. Protection function: The machine has software and mechanical limit protection modes, and the proportion of automatic shutdown when the maximum load is exceeded can be dynamically set; it has multiple protection functions such as overcurrent, overvoltage, and overload.
4. The load and deformation channels can be automatically marked, which is intuitive and convenient.
5. The batch test can realize the hierarchical display of the curve, and the curve automatically follows.
6. The software can realize user-defined speed setting and computer adjustment of speed. It can also achieve high-precision speed calibration, and adjust the speed gear and code at any time.
7. Monitoring the test process: Real-time display of various parameters such as test force, deformation, displacement, and curve during the test process.
8. Software authority hierarchical management function: In order to improve the security of software and data, the software can realize the function of authority management by setting different password protection.
9. Result reproduction function: After the test operation is completed and saved, it can be opened and re-analyzed the test data at any time in the future according to the user's needs.
10. The software operation interface is shown in the figure (the software is slightly different for different test requirements).
Standard Configuration
1. Test machine host 1 set
2. 1 set of test control software
3. 1 set of data acquisition card
4. Stepper motor 1 set
5. Deceleration system 1 set
6. 1 sensor
7. Photoelectric encoder 1
8. 2 sets of ball screws
9. Stretching accessory 1 set
10. Compression accessories: pressure plate Φ100 1 pair
11. 1 set of random tools
12. Random documents, instruction manual, certificate, etc.
Technical Parameters
1. Nominal Force: 5kN
2. Dual Column
3. Test speed: 0.1 – 500 mm/min (stepless speed regulation)
4. Deviation from set speed: ±0.1%
5. Accuracy level of force measurement: Level 1
6. Position accuracy: ± 1 microns
7. Position resolution: 0.02%-100%FS
8. Deformation measurement range: 0.02%—100% FS
9. Stretching space: 1000m
10. Test data recording rate: 400 kHz
11. Test data transmission rate to PC: 500 Hz
12. Maintenance-free AC drive motor
13. Power Supply: AC 220-240V, 60 Hz
14. Machine size: about 560 × 420 × 1650mm (length × width × height).
15. Machine weight: about 150 kg
16. Brand: QINSUN
17. Model: T200
在线联系供应商
Other supplier products
 |
Contact Lens Oxygen Permeability Tester | The Contact Lens Oxygen Permeability Tester (Polarography Method) is a precision instrument designed to measure the oxygen permeability (Dk) of sof... |
 |
Weatherometer Laboratory Testing Equipment(UV) | Features and Benefits 1. UVA-340. UVB-313 and other UV lamps, a single power of 40 watts, can accurately control the irradiation intensity of 0.15... |
 |
Knee Joint Prostheses Wear Tester | Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and... |
 |
Luggage rod reciprocating fatigue testing machine | Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stretched to test the gap g... |
 |
Universal Material Tensile Testing Machine丨Universal Material Tensile Tester | universal testing machineis a high-precision, multi-purpose material testing machine that tests the mechanical properties of various metal material... |
Same products
 |
robotic friction stir welding | 卖方: World Wide Welding | robotic friction stir welding ROBOTIC FRICTION STIR WELDING Robotic Friction Stir Welding... |
 |
friction stir welding tool | 卖方: World Wide Welding | friction stir welding tool FRICTION STIR WELDING (FSW) TOOLS Friction stir welding tool i... |
 |
fsw welded parts supplier | 卖方: World Wide Welding | fsw welded parts supplier FRICTION STIR WELDING(FSW) PRODUCTS FSW Welded Parts are compon... |
 |
AI Empowered Embroidery Software | 卖方: Zhejiang Maya Mechanical & Electrical Technology Co., Ltd. | AI Empowered Embroidery Software What is ? is a revolutionary image-to-embroidery convers... |
 |
Textile Thermal Insulation Property Tester | 卖方: Standard International Group (HK) Limited | Standard GB/T 41560-2022 (China): Specifies thermal resistance testing protocols for protective ... |
