GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
DESCRIPTIONThe GF6018A clamp type multimeter calibrator with RS-232 port, it can be connected with PC to control, become automatic verification system. It has precise interface and multi-functions including verification, storage and query. The GF6018A multimeter calibrator adopts color LCD screen, chart character display is clear, with high precision, stable and reliable, convenient operation and flexible characteristics. It fully meets ISO17025 laboratory standards and is a good ideal test equipment for electrical engineers.
APPLICATION
■ Power plant;
■ Universities;
■ Panel manufacturer;
■ Research institutes;
■ Electrical testing center;
■ Multimeter manufacturers;
■ Oscilloscope manufacturer;
■ Clamp meter manufacturers;
■ Digital meter manufacturers;
■ ISO17025 Electrical laboratory;
■ Electricity power bureau & power company;
■ Power engineering commissioning company;
■ Electrical Department of industrial and mining enterprises;
FEATURES
■ With 200A, 600A, 1000A calibration coil;
■ High precision AC/DC voltage source & current source;
■ Because of light weight, this device is more suitable for field use;
■ With RS-232 interface, this calibrator is controlled by PC software(optional;
■ Automatic or manual inspection, and the results are processing and management;
■ Has a non-volatile memory, Storage 500groups of the test data, for access and upload;
■ It can be semi-automatic or manual inspection of analog multimeter, clamp type current meter, all kinds of electric meter, (voltmeter, ammeter, frequency meters, resistance meter) basic error;
■ The calibrator can be generated with 2-31 harmonic wave, harmonic number, order, amplitude and harmonic phase of fundamental wave can be programmed;
■ Power amplifier working frequency range is 40Hz-1KHZ, has a good linear. Current amplifier is constant current source; voltage amplifier is constant voltage source;
PARAMETERS
| Electrical parameters | ||
|---|---|---|
| Power supply | Single phase AC 220V±10% or 110V±10%, 50/60HzAC | |
| AC Voltage output | ||
| range | 200mV, 400mV, 2000mV, 4000mV, 20V, 100V, 200V, 500V, 1000V; max 1050V |
|
| Range 20V-1000V | Accuracy | ±(0.03%RD+0.02%FS) |
| Stability | ≤0.01% FS /60s | |
| Range 200mV-4000mV | Accuracy | ±(0.3%RD+0.2%FS) |
| Stability | ≤0.04% FS /60s | |
| Load capacity | 20VA | |
| Waveform distortion | ≤0.3% | |
| Adjustable Range | 0-120% FS (1000V not included) | |
| Fineness | 5×10-5 | |
| AC Current Output | ||
| Range | 2mA, 4mA, 20mA, 40mA, 0.2A, 0.5A, 2A, 5A, 10A, 20A; max 24A | |
| Range 0.2A-20A | Accuracy | ±(0.03%RD+0.02%FS) |
| Stability | ≤0.01% FS /60s | |
| Range 2mA-40mA | Accuracy | ±(0.3%RD+0.2%FS) |
| Stability | ≤0.04% FS /60s | |
| Load capacity | 20VA | |
| Waveform distortion | ≤0.3% | |
| Adjustable Range | 0-120% FS | |
| Fineness | 5×10-5 | |
| Frequency Output | ||
| Range | 45-65Hz | |
| Fineness | 0.001Hz | |
| Accuracy | 0.002Hz | |
| Harmonic Wave | ||
| Times | 2-31 | |
| Extent | 0-20% | |
| Each harmonic phase fineness | 0.01·N (N is harmonic order) | |
| DC voltage output | ||
| Range | 200mV, 400mV, 2000mV, 4000mV, 20V, 40V, 100V, 200V, 400V, 1000V; max 1050V |
|
| Load capacity | 20W | |
| Adjustable range | 0-110% FS (1000V not included) | |
| Adjustable fineness | 5×10-5 | |
| Stability | ≤0.01% FS /60s (peak-peak value) | |
| Accuracy | ±(0.03%RD+0.02%FS) | |
| Ripple wave | ≤1% FS | |
| DC current output | ||
| Range | 20uA, 40uA, 200uA, 400uA, 2mA, 4mA, 20mA, 40mA, 0.2A, 1A, 2.5A, 5A, 10A, 20A; max 22A |
|
| Load capacity | 20W | |
| Adjustable Range | 0-110% FS (1000V not included) | |
| Adjustable Fineness | 5×10-5 | |
| Stability | ≤0.01% FS /60s (peak-peak value) | |
| Accuracy | ±(0.06%RD+0.04%FS) | |
| Ripple wave | ≤1% FS | |
| Resistance box | ||
| Range | 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10 kΩ, 20kΩ, 50KΩ, 100kΩ, 200kΩ, 500kΩ, 1MΩ, 2MΩ, 5MΩ, 10MΩ, 20MΩ | |
| Fineness | 0.02% | |
| Adjustable Range | 0-100%FS | |
| Accuracy | ±(0.3%RD+0.2%FS) | |
| Clamp meter range | ||
| 200A | Accuracy | ±0.2% |
| 600A | Accuracy | ±0.5% |
| 1000A | Accuracy | ±1% |
| Dot frequency square wave output | ||
| Range | 1kHz, 5kHz, 10kHz, 50kHz, 100kHz, 200kHz, 1000kHz | |
| Square wave amplitude | 4.5V | |
| Setting accuracy | 5×10-5 | |
| Communication Port | ||
| Communication Port | RS232, USB | |
| Standard | ||
| Standard | JJG124-2005; JJF1587-2016; IEC61010, IEC 61000, IEC 61326 | |
| Safety | ||
| Isolation protection | IEC 61010-1:2001 | |
| Measurement Category | 300 V CAT III, 600 V CAT II | |
| Degree of protection | IP20 | |
| Declaration of conformity | CE, CNAS certified | |
| Mechanical parameters | ||
| Dimension (L×W×H) (mm) | 440x360x160 | |
| Weight (kg) | 12 | |
| Environmental conditions | ||
| Operating temperature | 20°C±10°C | |
| Storage conditions | -30°C to 60°C | |
| Relative humidity | ≤85%RH | |
|
(1) FS means range, the same as below; Support customization |
||
在线联系供应商
Other supplier products
 |
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR | This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me... |
 |
单相电表测试仪 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数——电压、电流、有功功率、无功功率、视在功率、谐波、相角、功率因数、频率、能量等。 |
 |
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp | The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insulated BNC output cable that can accurately measure... |
 |
Q50A:1000A/1A wide range measuring AC current probe | The model Q50A current probe is designed for fast and easy measure the current in industrial and power environment. It has wide range of current me... |
 |
GF1000 MULTI-POSITIOS 1-PH ENERGY METER TEST BENCH | The GF1000 series multi-positions single phase kWh meter test bench can measure mechanical meters, electronic mechanical meters and electricity met... |
Same products
 |
EnruigeOK后视倒车尾门把手摄像头适用于2014-2015雪佛兰Silverado/GMC Sierra | 卖方: 深圳市恩瑞格科技有限公司 | 特征：*高品质和高性能采用高品质材料制造，达到或超过OEM标准，非常稳定。*安全停车后驻车倒车摄像头通过120°广角摄像装置，车后障碍物清晰可见。*易于安装这款倒车摄像头将与原始设备制造... |
 |
EnruigeOK双镜头福特Transit Van第三刹车灯后视倒车摄像头2014-2024 | 卖方: 深圳市恩瑞格科技有限公司 | 说明：*双镜头福特Transit倒车摄像头。其独特的设计允许一个安装有2个具有不同视点的摄像头。一个倒车摄像头用于查看交通情况，另一个用于查看拖车挂接装置和后保险杠。*制动灯更换摄像头。这款刹车... |
 |
EnruigeOK双镜头福特Transit定制货车第三刹车灯倒车摄像头2016至今 | 卖方: 深圳市恩瑞格科技有限公司 | 说明：*制动灯更换摄像头。这款刹车灯倒车摄像头旨在取代现有的刹车灯，便于工厂安装。*双镜头倒车摄像头。其独特的设计允许一个安装有2个具有不同视点的摄像头。一个倒车摄像头用于查看交通情况，另一个用... |
 |
EnruigeOK 双后视摄像头套件 适用于大众 Crafter 奔驰 Sprinter W639 刹车灯后部 | 卖方: 深圳市恩瑞格科技有限公司 | 说明：*完整的停车辅助：包括一个双镜头倒车摄像头和一个7英寸TFT-LCD显示器。显示器在倒车时显示后置摄像头录像，确保更安全的停车。*双镜头！！！双镜头倒车摄像头：一个（CH1）显示车辆后方的... |
 |
EnruigeOK 9英寸四分屏监视器，适用于卡车巴士RV摄像头的4CH汽车后视监视器 | 卖方: 深圳市恩瑞格科技有限公司 | 特征：*4个分体式视频显示器。显示格式为16:9。配有红外遥控器。*4路视频输入，倒车时自动切换到V4。支持调整屏幕角度。*自动识别输入信号，也可以使用没有统一格式的摄像头。*后视，图像可以左右... |
