Metal Dome Type Splice Closure for Opgw Cable
CONDITIONS FOR THE USAGE
Excess length of fiber connecting and branch-connecting. It's fit to each structure of 12-72core cables with its diameter less than 18.5mm in overhead lines.
STRUCTURE CHARACTERISTIC
1. Excess length of fiber is protected in stacking tray, each one is a space for 12 cores fiber. Hot-melting & hot-shrinking with a covering-pipe toprotect is the connecting form.
2. Stacking tray is designed as unattached tray for free operating without affecting each other.
3. The adoption of sealed gaskets and cone-shaped sealed gasket is suitable to cater different cables diameter, four cables should be installed in a splice closure if you need. It's convinent to be repaired as a result of the structure which is easy to open and close.
4. The metal parts of the cables should be lead out during the installation. We've prepared special fixed brackets which is safe and easy to install.
CAPACITY PARAMETER
Stacking semi-diameter: ≥40mm
Length of stacking rest: ≥1.6m
Degree of seal : 1 05Kpa
Temperature scale : -40 60
Anti-tension : 2000N
Anti side-pressure : 2500m/10cm
Anti-wallop : 1 8N·m
SIZE
Outline: cylinder (stand)styles.
Other supplier products
|
|
Overhead Line Fittings for Electric Power |
Vibration Dampers for OPGW (4D)COMPONENTzincification hammerhead, zincification steel armor rods, aluminum alloy clamp, stainless steel bolt etc.FU... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
COMPONENTinner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.CHARACTERISTIC1. Stress is distributed... |
|
|
Metal Dome Type Splice Closure for Opgw Cable |
COMPONENTinner armor rods, outer armor rods, rubber clamp piece, cover shell, right-angle hanging loop, U-shaped hanging loop, bolt, nut, gasket e... |
|
|
Cable Top Ties/Side Ties |
FunctionDistribution ties are designed for securing conductors in the top groove of rigid insulators vertically mounted.This specific distribution ... |
|
|
Cable Guy Grip Dead End |
Dead-ends are designed to hold insulated cables and bare homogeneous cables in transmission and distribution construction. Mechanical strength for ... |
供应产品
Same products
