Metal Dome Type Splice Closure for Opgw Cable
PROTECTION
Armor Rods are recommended for the protection of conductors at the point of suspension and stockbradge vibration damper, on alignment or with angles. They protect conductors for line angles up to 30°. Armor Rods fit tightly with the suspension and prevent bending of the conductors.
Damage of overhead conductors depends upon line design, exposure to wind flow, tension and vibration which create mechanical strains through each strand.
Attachment and suspension points of heavy fittings are the first to be damaged because of mechanical strains concentration. The application of an armor rod should decrease the strains and slightly extend the life of the conductor, particularly where the conductor endures severe conditions.
MATERIAL
These products are made from aluminium alloy.
NOTE
Lay direction of the armor rod must be the same as that of the outer stranding of the conductor to which it is applied.
ORDERING INFORMATION
When ordering,please specify:
-conductor type, stranding, outside diameter and lay direction
For AAC/AAAC/ACSR/ACAR
SELECTION CHART
| Model | Suitable wire (GB/T 1179-1983) | Clamp length(mm) | Diameter(mm) | Clamp weight(kg) | |
| Model | Outside Diameter(mm) | ||||
| HL-95/15 | LGJ-95/15 | 13.61 | 1400 | 3.5 | 0.7 |
| HL-95/20 | LGJ-95/20 | 13.87 | 1400 | 3.5 | 0.7 |
| HL-95/55 | LGJ-95/55 | 16.00 | 1500 | 3.5 | 1.0 |
| HL-120/7 | LGJ-120/7 | 14.50 | 1400 | 3.5 | 0.7 |
| HL-120/20 | LGJ-120/20 | 15.07 | 1400 | 3.5 | 0.7 |
| HL-120/25 | LGJ-120/25 | 15.74 | 1400 | 3.5 | 0.7 |
| HL-120/70 | LGJ-120/70 | 18.00 | 1800 | 4.5 | 1.3 |
| HL-150/8 | LGJ-150/8 | 16.00 | 1500 | 3.5 | 1.0 |
| HL-150/20 | LGJ-150/20 | 16.67 | 1.0 | ||
| HL-150/25 | LGJ-150/25 | 17.10 | 1.0 | ||
| HL-150/35 | LGJ-150/35 | 17.50 | 1.2 | ||
| HL-185/10 | LGJ-185/10 | 18.00 | 1800 | 5.0 | 1.3 1.4 1.4 1.4 |
| HL-185/25 | LGJ-185/25 | 18.90 | |||
| HL-185/30 | LGJ-185/30 | 18.88 | |||
| HL-185/45 | LGJ-185/45 | 19.60 | |||
| HL-210/10 | LGJ-210/10 | 19.00 | 1800 | 5.0 | 1.5 2.0 2.0 2.0 |
| HL-210/25 | LGJ-210/25 | 19.98 | |||
| HL-210/35 | LGJ-210/35 | 20.38 | |||
| HL-210/50 | LGJ-210/50 | 20.86 | |||
| HL-240/30 | LGJ-240/30 | 21.60 | 1900 | 5.0 | 2.2 |
| HL-240/40 | LGJ-240/40 | 21.66 | |||
| HL-240/55 | LGJ-240/55 | 22.40 | |||
| HL-300/15 | LGJ-300/15 | 23.01 | 2000 | 6.0 | 2.2 2.5 2.7 2.7 2.7 2.7 |
| HL-300/20 | LGJ-300/20 | 23.43 | |||
| HL-300/25 | LGJ-300/25 | 23.76 | |||
| HL-300/40 | LGJ-300/40 | 23.94 | |||
| HL-300/50 | LGJ-300/50 | 24.26 | |||
| HL-300/70 | LGJ-300/70 | 25.20 | |||
| HL-400/20 | LGJ-400/20 | 26.91 | 2200 | 6.0 | 4.2 4.2 4.2 4.2 4.7 4.8 |
| HL-400/25 | LGJ-400/25 | 26.64 | |||
| HL-400/35 | LGJ-400/35 | 26.82 | |||
| HL-400/50 | LGJ-400/50 | 27.63 | |||
| HL-400/65 | LGJ-400/65 | 28.00 | |||
| HL-400/95 | LGJ-400/95 | 29.14 | |||
| HL-500/35 | LGJ-500/35 | 30.00 | 2500 | 6.0 | 5.2 |
| HL-500/45 | LGJ-500/45 | 30.00 | |||
| HL-500/65 | LGJ-500/65 | 30.96 | |||
| HL-630/45 | LGJ-630/45 | 33.60 | 2500 | 7.9 | 6.8 |
| HL-630/55 | LGJ-630/55 | 34.32 | |||
| HL-630/80 | LGJ-630/80 | 34.82 | |||
| HL-800/55 | LGJ-800/55 | 38.40 | 2500 | 7.9 | 6.8 |
| HL-800/70 | LGJ-800/70 | 38.58 | |||
| HL-800/100 | LGJ-800/100 | 38.98 | |||
| Note：The meaning of the letters and numbers in the model no.：H-Armor Rod；L-spiral preformed；after“-”is the suitablewire type. | |||||
在线联系供应商
Other supplier products
 |
Metal Dome Type Splice Closure for Opgw Cable | COMPONENTinner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.CHARACTERISTIC1. Stress is distributed... |
 |
Metal Dome Type Splice Closure for Opgw Cable | COMPONENTinner armor rods,middle outer outer armor rods, thimble, U-shaped hanging loop, PD hanging board, triangular conjoint board, bolt, nut, e... |
 |
Metal Dome Type Splice Closure for Opgw Cable | COMPONENTinner armor rods, outer armor rods, rubber clamp piece, cover shell, right-angle hanging loop, U-shaped hanging loop, bolt, nut, gasket e... |
 |
Metal Dome Type Splice Closure for Opgw Cable | COMPONENTinner armor rods, outer armor rods, thimble, U-shaped hanging loop, extension loop, bolt, nut, etc.CHARACTERISTIC1. Stress is distributed... |
 |
Cable Top Ties/Side Ties | FunctionDistribution ties are designed for securing conductors in the top groove of rigid insulators vertically mounted.This specific distribution ... |
Same products
 |
Control valve for fuel Injector 0445120359 | 卖方: 828487 | Control valve for fuel Injector 0445120359 Control valve for fuel Injector 0445120683 China-Lu... |
 |
Control valve for fuel Injector 0445120315 Control valve for fuel Injector 0445120327 | 卖方: 828487 | Control valve for fuel Injector 0445120315 Control valve for fuel Injector 0445120327 China-L... |
 |
Control valve for fuel Injector 0445120296 Control valve for fuel Injector 0445120297 | 卖方: 828487 | Control valve for fuel Injector 0445120296 Control valve for fuel Injector 0445120297 China-Luto... |
 |
China import canton fair october 15 to 19 2026 | 卖方: 828487 | China import canton fair october 15 to 19 2026 China-Lutong is now one of the specialist Fuel ... |
 |
The 2026 CIMP AutoEcosystems Expo | 卖方: 828487 | The 2026 CIMP AutoEcosystems Expo China-Lutong is now one of the specialist Fuel Injection Sys... |
