Disc Brake Tagging Axle
Disc Brake Tagging Axle
Model CH75FT
Nominal Load(Kg) 7500
Wheel Tread(mm) 2101
Kingpin Inclination（°） 8°
Caster Angle（°） 3.5°
Kingpin Camber（°） 0°
Kingpin Distance（mm） 1813
Tie-in(mm) -2~2
Max.Turning Angle(°) Inner 15°/Outer13.3°
Disc Brake Spec. 22.5"
Axle Weight(Kg) 530
Matching Model 12~13.7M Bus
CH75FT Performance Features
1.Automatic Steering meets requirements of Multi-axle Bus and Tourism Bus.
2.Designed for Low Floor Bus, One-Step-On Convenience.
3.Long Service Life, Low Weight, Economic Fuel Consumption.
4.Tapered Roller Bearings Adopted, thus Load Capacity Increased, Steering Force Reduced.
5.Adjustable Tie Rod enables easy flexible Toe-In, Service Life of Tire prolonged.
6.Bigger Tread suitable for 2.3-2.6m-width Bus.
7.Reasonable King Pin Incidence improved Steering Stabilization.
8.Optimized Outer Camber prolonged Service Life of Tire.
9.Most domestic Suspension Structure matchable.
10.Both domestic and abroad Disc Brakes optional.
11.Standard ABS enhanced Vehicle Stabilization and Controllability.
Other supplier products
|
|
Drum/Disc Brake Front Steering Axle |
Drum/Disc Brake Front Steering Axle
Model CH65F
Nominal Load(Kg) 6500
Wheel Tread(mm) 2054(Drum)2032(Disc)
Kingpin Inclination(°) 7°
... |
|
|
Drum/Disc Brake Front Steering Axle |
Drum/Disc Brake Front Steering Axle
Model CH55F
Nominal Load(Kg) 5500
Wheel Tread(mm) 2020(Drum)2050(Disc)
Kingpin Inclination（°） 7&de... |
|
|
T14S2*5 S&T Transmission |
Model T14S2x5
Max. Input Torque (kgf. m/rpm) 149/1200
Gear Ratio 1st L 9.555 L 9.555
H 7.428 H 7.428
2nd L 4.664 L 4.664
H 3.625 H 3.62... |
|
|
T9S5 S&T Transmission |
Model T9S5
Max. Input Torque (kgf. m/rpm) 90/1200
Gear Ratio 1st 7.076
2nd 4.777
3rd 2.640
4 th 1.575
5th 1.000
rev 6.72
Synchro Type ... |
|
|
Drum/Disc Brake Rear Axle |
Drum/Disc Brake Rear Axle
Model CH15HB
Nominal Load(Kg) 13000
Wheel Tread(mm) 1860
Max. Troque Output (N.m) 45000
Housing Spec.(mm*mm) 1... |
供应产品
Same products
