METAL HEMMING
Metal hemming is a process that involves folding the edge of the sheet metal to 180° onto itself. Then, two newly formed layers are flush with each other. Many automotive parts are produced by metal hemming, such as trunk lids, deck lids, hoods, tailgates and doors. There are 4 types of metal hemming: teardrop hem, closed hem, open hem and rolled hem. The closed hem is the most popular one as the process is simple. It is totally flush. However, it has material limitations, including thickness and angle limitations to avoid fracture.
WHAT IS THE PURPOSE OF METAL HEMMING?
Generally, metal forming is used to connect parts together to achieve a better appearance and strengthen the edges of parts.
HOW TO HEM MATERIAL WITH LOW FLEXIBILITY?
For some material such as aluminum, the closed hem is not an ideal choice, since the flexibility them are not enough and they are easy to break during the process. Instead, teardrop hem is the best choice for this material. It is a flange which is bent over more than 180° with only marginal inside radius change, and that is the reason why it can process that low-ductility without fracture.
WHAT IS THE DIFFERENCE BETWEEN METAL HEMMING AND METAL SEAMING?
Hemming and seaming are two very similar metalworking processing that both involve bending metal over onto itself. The difference is that seaming is to use a seam to join two layers of metal sheet together and two layers are not flush with each other while on the other hand two layers are flush with each other with hemming.
If you need any kinds of metal work fabrication, please contact us, as a professional fabrication work company, Hongkun is willing to offer you high quality products.
在线联系供应商
Other supplier products
 |
AUTOMOTIVE PARTS | There are tremendous metal stamping parts you can find on a car. From a small clip to the entire body frame, the production of a car is always stro... |
 |
METAL WELDING | Metal Welding Service Welding is a manufacturing process and technology to join metals or other thermoplastic materials such as plastics by heat... |
 |
METAL PUNCHING | Metal punching serviceis a key part of Hunkmachining's services, mostly applied to automobile parts. As a metal punching factory, metal punching co... |
 |
MOVER SEAT MOUNT | lawn mower seat bracketsis set into the seat of the mower in order to support the seat against the weight and pressure from the driver. What we are... |
 |
MOWER DRIVE ARM IN MOWER DRAG LINK | It is a mechanical assembly used to control the steering of lawn mower, consisting of drive arm, steering arm, steering knuckle , etc. Most of thes... |
Same products
 |
Armored Door Locks | 卖方: Wuyi Jiamin Locks Co., Ltd | JM-55 Door handles Entrance 1, Material: Iron plate+ aluminum lever2, Center distance: 68mm3, P... |
 |
WATSILA L20 油嘴 柱塞 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司，供应WARTSILA L20船用柴油机配件。 主要配件:油嘴，柱塞，出油阀，缸盖，缸套，连杆，活塞，活塞环，连杆螺栓，轴瓦进气阀，排气阀，阀座，指示阀，油管，喷油器，高... |
 |
MAN 16/24, 21/31,23/30船用柴油机配件 | 卖方: 双成国际有限公司 | 秦皇岛双晟机械有限公司，专业为客户提供原厂及OEM厂生产的高速、中速、低速船用柴油机设备及备件，图纸器、空压机、分机、油泵、水泵、水泵、仪器仪表等 主要品牌：MAN 、PIELSTICK DA... |
 |
High Voltage PTC Heater for Electric Vehicle | 卖方: Shanghai Pake Thermistor Ceramics Co., Ltd. | Application:It is used to heating the airCharacteristic description :High heating speedDual heati... |
 |
Solid Tire For Mini Wheel Loader | 卖方: Zhejiang Tongchao Industry and Trade Co., Ltd. | Solid Tire For Mini Wheel Loader（） It is composed of low heating and cutting-resistant materials... |
