SMC/BMC Antenna Reflector
(1) High precision, high efficiency, and high gain.
The most important job of using SMC for the manufacture of antennas is to fully exploit its features and achieve high precision in antenna design from product design and process. Under the condition that the shrinkage ratio of the material and the SMC molding shrinkage rate have been considered in the mold size design, the SMC antenna reflective surface has a smaller shape from the original design paraboloid after molding. That is, the accuracy of the SMC molded antenna is completely guaranteed by the accuracy of the mold. The rms value of the SMC antenna molded integral reflection surface is 0.25 mm, and the rms value of the single-piece reflection surface of the split antenna is less than 0.3 mm, and the rms value of the reflective surface after assembly is less than 0.6 mm.
(2) Corrosion resistance
Conventional antenna materials such as aluminum plates and steel plates are made of metal materials, not as good as SMC which as a non-metal dielectric composite material in terms of acid resistance, alkali, salt, and corrosion resistance. The Pikington laboratory in the United States used infrared to analyze the surface of SMC materials and found that its surface is covered by additives, resin, and very fine calcium acid filler. It has good acid resistance, water resistance and corrosion resistance. The antenna reflection made by this material is solved the disadvantage of the traditional metal material antenna is easy to corrode. In coastal areas, rainy, humid areas and areas with excessive acid rain, the anti-corrosion advantages of SMC molded antennas are particularly prominent. The SMC molded antenna samples were placed in 130 highly corrosive chemical environments at an ambient temperature of 50 ° C. The results showed that the test samples showed little or no change.
(3) Long life
The average aluminum plate antenna is as small as 2-3 years in the coastal area, and more often 4-6 years, and it will generally be damaged by salt spray erosion and aging. The most obvious example is the cable TV (CATV) in Taiwan, which was built earlier than the mainland. It is estimated that there are nearly 1000 satellite TV receiving antennas on the island, all built in the mid-1980s, all of which were aluminum plate antennas, until the early 1990s. , that is, has begun to replace. The service life of SMC molded antennas is generally more than 15 years; PROMLIN's prototype SMC molded antennas in 1985 are still working normally, and they are subject to typhoons and heavy rain every year.
(4) Strong wind resistance
Since the antenna reflection surface is designed during the molding process, multiple longitudinal and circumferential rib structures are designed. According to the structural strength calculation, the SMC antenna can withstand a wind load of 45 m/s, which shows its remarkable structural rigidity and strength.
(5) Special reflective layer technology
The reflective surface of the SMC antennauses a metal aluminum mesh as a reflective layer of electromagnetic waves. The aluminum mesh in the finished antenna is evenly embedded under the surface SMC, which can reflect electromagnetic waves and insulate the atmosphere, and plays a good protective role.
(6) Good consistency, no deformation, easy to transport and install
Because SMC antenna adopts membrane pressure technology under high temperature and high pressure. Its material properties and processing technology determine the unparalleled consistency of SMC antennas with other antennas. This not only ensures the accuracy and high gain of the antenna, but also is very easy to install and debug. SMC, commonly known as "glass reinforced plastic", has the characteristics of no deformation, which eliminates the adverse effects of antenna deformation on the satellite receiving system during transportation.
Aobang technology limitedhas a technical team engaged in many years of production and R&Dof bmc composite, and has the industry-leading expertise and technical level. We are dedicated to meeting the needs of our customers and highlighting the value that is given to our customers.
在线联系供应商
Other supplier products
 |
BMC, SMC, GRP, GFK Wall Panel | Aobang compositeWall Panelis divided into: BMC Wall Panel, SMC Panel, grpWall Panel, GFK Wall Panel. Composite Wall Panel the main functions: use ... |
 |
Shell Moulding | Shell MouldingDescription Mainly for injection molding, the cavity pressure should be considered as small as possible when designing the runner an... |
 |
SMC Antenna Reflector Mould | The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and reduce noise to the lowest lev... |
 |
BMC, SMC, GRP, GFK Building & Decoration Materials | Building decoration materials, also known as building finishing materials, refer to the materials laid or painted on the surface of buildings to de... |
 |
BMC/SMC Motor | BMC/SMC Motors Description BMC plastic edging motor replaces traditional iron and aluminum, reduces the process, seals more, and has higher safe... |
Same products
 |
真空泵三相异步电机 | 卖方: Taizhou Sulin Electromechanical Co., Ltd. | 真空泵三相异步电机是一种专为真空泵设计的专用电机，具有高效可靠的特点。该电机是各种工业应用中的关键部件，尤其是在真空技术至关重要的领域。其坚固耐用的设计和卓越的性能使其成为需要持续高效产生真空的... |
 |
IndustrialFlex Worm Gear Motor | 卖方: Ruian Zhanpeng Machinery Co., Ltd | IndustrialFlex Worm Gear Motoris built to support equipment requiring smooth motion transmission ... |
 |
TorqueBalance High Precision Gear Reducer Motor | 卖方: Ruian Zhanpeng Machinery Co., Ltd | TorqueBalance High Precision Gear Reducer Motorprovides controlled speed output and flexible redu... |
 |
High Precision Gear Reducer Motor | 卖方: Ruian Zhanpeng Machinery Co., Ltd | The High Precision Gear Reducer Motoris an advanced power transmission solution that combines a h... |
 |
Philips TTF Motor 9498 396 00197 | 卖方: KF-SMT Technology Co., Ltd | Part Name: PHILIPS TTF MOTORPart NO: 9498 396 00197 Delivery 1-5working days ... |
