Wound Rotor Slip Ring Motor
Product Description
The JR series motor is a protective winding type rotor three-phase asynchronous motor with cooling method IC01 and continuous working system (S1). This series of motors can provide a large starting torque at a small starting current and can adjust the speed within a certain range.The JR winding slip ring motor casing is a cast iron casing or a steel plate welded casing with high structural strength and good mechanical properties. The motor shaft extension end and the non-bearing end have an inlet and outlet air outlet, and the motor slip ring is located at the non-bearing end. The series of motors have simple structure, convenient installation, convenient maintenance, large starting torque and safe and reliable operation. JR winding slip ring motors can drive a variety of different machines, such as fans, compressors, pumps, crushers, ball mills, winches, hoists, transport machinery and other equipment, as well as mines, machinery, power plants and Used as prime mover in various industrial and mining enterprises.
The JR series motor is a wound rotor three-phase asynchronous motor. This series of motors meets the technical standard conditions. It can drive a variety of different machines, such as fans, compressors, pumps, crushers, ball mills, cutting machines, transport machinery and other equipment. It is used as a prime mover in the machinery industry, power plants and various industrial and mining enterprises. The rating of the JR winding slip ring motor is based on the continuous working system (S1). The frequency is 50HZ, the rated voltage is 220V/380V, 380V, 415V, 3000V, 6000V, which can be designed to 3300V/10000V according to the needs of users.
The protection of this series of motors is IP23; the cooling method is IC01; the structure and installation method of the motor is generally IMB3, and it can also be designed as vertical installation according to customer requirements.
The ratio of the maximum torque to the rated torque of the JR winding slip ring motor at rated voltage is not less than 1.8.
The JR winding slip ring motor must be connected to the starting varistor in the rotor circuit at the start. It is not permissible to short-circuit the rotor windings directly.
:ZCL Electric Motor Technology Co., Ltd.
Product Parameters
Motor power range: 80KW-850KW
Rated voltage: 380V/415V/660V/690V/3000V/33000V/6000V/10000V
Number of poles: 6/8/10/12
Rated frequency: 50Hz/60Hz
Protection level: IP23
Cooling method: IC01
Working system: S1
Insulation class: B
Wiring method: △
Ambient temperature: ≥ -15 ° C and ≤ 40 ° C
The JR winding slip ring motor is suitable for altitudes up to 1000 m and ambient air temperature is 0-40 degrees. The protective motor should be installed in a room with clean air, no dust, steam, acid, alkali and other corrosive gases. It is not allowed to be used in an environment containing explosive gas or dust.
Feature of Product
The JR winding slip ring motor casing is a cast iron casing or a steel plate welded casing with high structural strength and good mechanical properties. The motor shaft extension end and the non-bearing end have an inlet and outlet air outlet, and the motor slip ring is located at the non-bearing end. The series of motors have simple structure, convenient installation, convenient maintenance, large starting torque and safe and reliable operation.
. is a modern import and export company that manages electrical equipment, mechanical equipment, automation control equipment technology research, technical consultation, etc. With a registered capital of RMB 3 million, the company is located in Hebei, China with abundant products and convenient transportation. Shijiazhuang City, the provincial capital of the province, is based on the dominant position in the steel, chemical, building materials and machinery processing industries in North China.
在线联系供应商
Other supplier products
 |
Permanent Magnet Synchronous Motor | Product Description The permanent magnet synchronous motor product is developed and manufactured according to China JB/T 13297-2017 "TYE4 series t... |
|
|
Wound Rotor Slip Ring Motor | Product Description The JR series motor is a protective winding type rotor three-phase asynchronous motor with cooling method IC01 and continuous ... |
 |
High Voltage Squirrel Cage Induction Motor | YKK series squirrel cage high-voltage three-phase asynchronous Induction motor is a cage-type asynchronous motor with closed air-to-air cooler. Th... |
 |
Low voltage high power squirrel cage motor | The low-voltage variable frequency motor has the characteristics of wide speed regulation range, low vibration and low noise. The motor adopts the... |
 |
High Voltage Slip Ring Induction Motor | The large-scale High Voltage Slip Ring Induction Motor is a large-scale mechanical equipment motor product developed and manufactured by our compa... |
