BM6 High Pressure Motor
What is BM6 High Pressure Motor?
BM6 high pressure hydraulic motoris a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cover, bearing, long linkage shaft, bearing housing, stator and rotor pair, valve disc, small linkage shaft, distribution plate and preloading spring. This disc valve hydraulic motorfeatures low speed and high torque. The motor has a six-toothed cycloidal rotor, which is installed in the middle of the stator and meshes with the stators of the seven arc teeth to form seven sealed spaces; 12 holes on the distribution plate, 6 of which are combined with the oil. The mouth is connected, and the other six are connected to the back (in) port. The seven holes auxiliary distribution plates on the valve disc form a seven volume chamber with the cycloidal rotor.
Characteristic Features of BM6 High Pressure Motor:
BM6 is a large volume, disc valve, high pressure motor, with ball-bearings design, and can bear big load, and has higher torque than BM5. Advanced design in disc distribution flow, which can provide improved performance at low speed. The valve can automatically compensate for the wear, so the volumetric efficiency is high. Double taper roller bearings permit high radial loads. The motors can be used on heavier vehicles in traction drive applications
Product Description
|
Quick Details |
||||
|
Type |
Hydraulic Motor |
Series |
BM6 hydraulic motor |
|
|
Place of Origin |
China (Mainland) |
Brand Name |
Gulex |
|
|
Displacement(ml/r) |
195-985 |
Material |
Ductile Iron |
|
|
max torque(N*m) |
575~1875N*m |
Surface treatment |
Spray Painting |
|
|
pressure(MPa) |
12~20.5 MPa |
Max cont Flow |
150L/min |
|
|
Speed(RPM) |
153~775r/min |
Oil temperature |
-35℃~80℃ |
More details of hyd cylinders for sale, please visit our website.
As a forging parts manufacturer, we will offer more kinds of related products for sale, if you have needs, please contact us.
在线联系供应商
Other supplier products
 |
TG-E Multi-stage Hydraulic Cylinders | What is TG-E Multi-stage Hydraulic Cylinder? TG hydraulic cylinder is a single-acting multi-section telescopic sleeve lift cylinder. It has the adv... |
 |
BM3 Cycloid Hydraulic Motor | Brief Introduction: The BM3 cycloid hydraulic motoris a shaft-loaded cycloidal hydraulic motor with higher load capacity and can be used for lon... |
 |
Hydraulic Cylinder | Large Hydraulic Cylinders for Sale Hydraulic cylinder is an actuator that converts hydraulic energy into mechanical energy and performs linear reci... |
 |
Forging Process | Create Die Mold Create a die mold is the first step for the metal forging process, it is critical and essential step for the die mold forging proc... |
 |
Forged Hydraulic Cylinder Head | Product: forged hydraulic cylinder head Application: hydraulic cylinder Place of origin: Hebei, China (Mainland) Material: C45, 20, ASTM A... |
