G-Type Finned Tube
The aluminum fins are embedded in a spiral groove about 0.25~0.5mm deep on the surface of the steel pipe, while the metal extruded from the spiral groove is rolled back to the fin root.
The biggest advantage of this kind of g fin tubeis that it has good thermal performance, the working temperature can reach 350～400℃, and the fin temperature can reach 260℃, and the maximum use temperature of G type finned tubeis 350℃ as stipulated in GB/T 15386-94, the national standard of air cooler.
The disadvantage is that the fins and tubes of the two metals in the atmosphere are prone to electrochemical corrosion, poor corrosion resistance and high cost. The tube wall has stress concentration and cannot be used for medium and high pressure applications. If the pressure is not squeezed well (the edge of the spiral groove is not close to the aluminum sheet), its heat transfer performance is worse than any finned tube.
Introduction of G Type Finned Tube
G-Type finned tubes, also known as grooved finned tubes or embedded-fin tubes, are a type of finned tubes where the "G" stands for grooved. These tubes are formed by twisting a fin strip, typically made of copper or aluminium, into a machined groove on the outer surface of the tube. The fin strip is then back-filled to securely lock it in place, ensuring a tight fit. The base tube material is completely surrounded and filled by the fins.
The specific materials, dimensions, and groove designs of G-Type finned tubes can vary depending on the application requirements and operating conditions. Factors such as fluid characteristics, operating temperature, and pressure influence the selection of materials to ensure optimal heat transfer performance.
In summary, G-Type finned tubes are a robust and effective solution for high-temperature heat transfer applications. Their grooved design and secure locking mechanism provide strength and durability, enabling efficient heat exchange and contributing to overall system performance.
Why G-type Finned Tube?
Grooved finned tubes offer several advantages. The grooved design significantly increases the surface area of the tube, enhancing heat transfer efficiency. They provide excellent strength and durability, making them suitable for applications requiring high-temperature heat transfer. The tight fit of the fins ensures efficient heat dissipation or absorption.
Grooved finned tubes are typically made of materials like copper or aluminium. The selection of the material depends on factors such as the application requirements, operating temperature, and compatibility with the working fluid.
The grooved design of the fins increases the surface area of the tube, allowing for better heat transfer. This enhanced surface area facilitates efficient heat dissipation or absorption, leading to improved overall heat transfer performance.
As one of industrial cooling tower manufacturers, we will do our best to meet all the needs of customers.
在线联系供应商
Other supplier products
 |
Molybdenum Plate | Molybdenum plateis a high-quality, durable, and lightweight material used in a variety of applications, including aerospace, manufacturing, and def... |
 |
L-Type Finned Tubes | L type fin tubeare easy to manufacture and cheap, and are used in large numbers in petrochemical air coolers. However, since the aluminum fins are ... |
 |
ITO Target | ITO targetis made up of a combination of indium oxide and tin oxide and serves as a crucial component in the production of ITO film. This film hold... |
 |
METAL SPUTTERING TARGET | Metal pt sputtering targetand au sputtering targets are critical components of the sputtering process used in the manufacturing of thin films for s... |
 |
PHOSPHATE ESTERS | PHOSPHATE ESTERS Phosphate esters are a group of organic compounds that are widely used as lubricants, surfactants, and flame retardants, among ot... |
Same products
 |
Yoyik offer cooler GLC2-2.6 for steam turbine | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Yoyik offer cooler GLC2-2.6 for steam turbine YOYIK is a hi-tech company specializing in the pro... |
 |
Recirculated Air Heating and Cooling Unit | 卖方: Fujian Air Technology Systems Co., Ltd | When hot/cold water or stream passes the Recirculated Air Heating and Cooling Unit, the efficient... |
 |
Water Chiller Manufacturers Near Me | 卖方: Shanghai Kendall Refrigeration Equipment Co., Ltd | Headquartered in Shanghai, China, Kendall stands as a pioneer and leader in the refrigerati... |
 |
Cold Room Solutions | 卖方: Shanghai Kendall Refrigeration Equipment Co., Ltd | At , we bring over 20 years of expertise in refrigeration design, construction, installatio... |
 |
Flooded Water-cooled Screw Chillers | 卖方: Shanghai Kendall Refrigeration Equipment Co., Ltd | This has a compact structure which makes it easy to install and maintain. It is equipped wi... |
