ELEVATOR ROPE
As an important part of the elevator, the elevator ropeis not only related to the suspension and vertical weight of the elevator cabin, but also works together with the driving motor to realize the up and down operation of the elevator. Elevator wire ropes are composed of rope strands, strand steel wires and rope cores. Most of the more common elevator cablesare 6mm-16mm.
Elevator RopeTypes
Elevator Steel Wire Rope
According to the application, elevator wire ropes are mainly divided into traction wire ropes and speed governor wire ropes.
Elevator Rope Attachment
The elevator rope attachment is matched with the rope head plate to connect the traction wire rope with other components.
What Is Elevator Steel Wire Rope Made Of?
The elevator wire rope consists of rope strands, strand wires and rope cores. Elevator wire ropes are made by twisting a single strand in a spiral around the core. Usually 50 to 65 high-quality carbon steel or 60Si2Mn steel wire is used. For safety, the elevator wire rope uses special or No. 1 steel wire, and the diameter of the steel wire is limited between 0.3 and 1.3 mm. The elevator wire rope has an oil-impregnated fiber core in the middle, which supports and fixes the position of the strands so as to improve the contact between the ropes and make the wire well lubricated.
Installation
When installing steel wire ropes, extra care must be taken that the ropes are unwound from the ring or reel without torsions and without any outer damage. The same applies to reeving the ropes into the system.
Maintenance
As part of traction elevator parts, wire ropes must be maintained regularly. The type of maintenance depends on the lifting gear, its purpose and the wire rope selected. Regular maintenance can greatly improve the service life of the wire rope.
After a period of operation, the lubricating oil on the surface of the wire rope will be consumed, and the lubricating oil should be reapplied regularly.
The surface of the wire rope is not completely smooth, so dirt and dust may accumulate and require regular cleaning.
If it is detected during inspection that the broken wire ends may pass through adjacent wires and break them while running on the pulley, these broken wire ends must be removed.
There are many elevator parts manufacturers, but we are one of the best choices for you.
在线联系供应商
Other supplier products
 |
ELEVATOR DOOR OPERATOR | The elevator door operator is also called the elevator car door. It is a mechanical device installed on the elevator car and responsible for the op... |
 |
BST Door Operator | The elevator door system consists of the elevator car door and the elevator landing door. As a leading elevator door factory and supplier in China,... |
 |
ELEVATOR DEFLECTOR SHEAVE | In the traction elevator, the elevator deflector shave is mainly to increase the distance between elevator cabin and counterweight, and change the ... |
 |
ELEVATOR BUFFER | The lift bufferis the last protection measure in the elevator mechanical safety device. Lift car buffer is a safety device that relieves the impact... |
 |
Elevator Fishplate | The length of most elevator hollow guide rail are 5 meter, so when installing the elevator, the elevator fishplateis used to connect the two guide ... |
Same products
 |
Common Rail Fuel Injector Nozzle 0433172311 DLLA 151P2311 for injector 0445120324 | 卖方: 738347 | #Fuel Injection Nozzle 0 433 171 889##Fuel Injection Nozzle 0 433 171 898##Fuel Injection Nozzle ... |
 |
TH 7026 台式焊接放大镜：微观视界的精准焊接伙伴 | 卖方: 深圳维客修有限公司 | TH-7026 台式放大镜三手带双倍放大镜 10 LED，用于手机 PCB 电路板维修。TH 7026 焊接放大镜带 10 个 LED 灯 3X/4.5X/25X，适用于电子、医疗、教育、家电维... |
 |
Custom Plastic Parts | 卖方: Xin Pin Prototype Manufacturing Co.,LTD | CNC machining/ vacuum casting/injection mold prototype to production manufacturing is available. ... |
|
|
ELEVATOR ROPE | 卖方: SUZHOU PANDA ELEVATOR CO., LTD | As an important part of the elevator, the elevator ropeis not only related to the suspension and ... |
 |
Kia Picanto 2004-2008 Control Arm | 卖方: WENZHOU SAFE AUTO PARTS Co.,Ltd | This product is suitable for kia picanto control arm2004-2008 control arm, with one ball joint, w... |
