Gr5 Titanium Tube
The 21st century is an era of sustainable development of the marine economy, and marine resources are an important sector of economic development. Gr5 titanium tubehas become the preferred material for deep-sea equipment manufacturing due to its excellent corrosion resistance, low density, and high specific strength. It is widely used in the production of oil wells, geothermal and natural gas well pipelines, as well as precision instruments and meters. If you want to know more about the gr5 titanium tube price and cost, please do not hesitate to contact the CS titanium tube supplier.
Gr5 Titanium Tube Size
|
Outside diameter |
>20mm |
|
Wall thickness |
>3mm |
|
Length |
<6000mm |
Some Sizes of Gr5 Titanium Tube Applications for Your Reference:
Gr5 Titanium Tube Production Process
The GR5 titanium pipes on the market are mainly high-strength thick walled pipes produced by hot extrusion and rolling methods. If the length is short, it can be formed by direct forging and turning. Another process is to directly drill deep holes on the forged rod and use an external lathe to achieve the size required by the customer. This process can achieve a titanium tube length of 3 meters.
Introduction to Gr5 Titanium Tube Extrusion Process
Grade 5 ingot produced by two vacuum consumable electric furnaces→forged rod billets→extruded tube billets → online straightening and acid pickling surface descaling → internal and external surface processing →finished GR5 titanium alloy tubes.
Gr5 Titanium alloy has poor thermal conductivity, resulting in a significant temperature difference between the surface layer and the central layer of the billet, which exacerbates the non-uniformity of metal flow. As a result, the surface layer generates significant additional tensile stress and forms cracks on the product surface. In severe cases, large extrusion shrinkage holes may occur on extruded bars and pipes. Titanium alloy pipes have significant thermal effects during the extrusion process, which can cause overheating of the structure of the extruded pipes in severe cases, thereby affecting the structure and performance of the product. Therefore, the reasonable selection of extrusion parameters and processes is very important, such as production of the Ф140 * 4 * 4000mm titanium alloy tube is extruded with a compression ratio of 3-10, and an extrusion speed of 50-120mm/s is selected to avoid thermal effects.
Gr5 Titanium Tube Applications
With the acceleration of oil and natural gas drilling and production, the demand for large-diameter extruded titanium alloy gr5 pipes has also increased. These pipes are mainly used for oil wells, geothermal and natural gas well pipelines, etc. The United States will Ф (48~610) * 26 * 2600mm GR5 titanium alloy pipe is used for geothermal and offshore drilling pipelines. Produced by RMI Corporation in the United States Ф 650 * (22-25) * 35000mm ultra long gr9 (Ti-3Al-2.5V) titanium alloy pipe is used for subsea oil extraction. The riser of the Norwegian North Sea drilling support platform is Ф600 * 25 * 1500mm gr5Eli (gr23) titanium alloy pipe. Russian VS MPO company produces gr5 titanium alloy pipes for oil extraction.
在线联系供应商
Other supplier products
 |
Molybdenum Sputtering Target | Molybdenum sputtering targets include molybdenum plane targets (molybdenum round targets and molybdenum strip-type targets) and molybdenum rotating... |
 |
Molybdenum Wire | Molybdenum spray wireis mainly refers to the wire cutting processing with high pressure electric field continuous movement to cut the workpiece mad... |
 |
Nitinol Tube | Nickel titanium alloy is a type of shape memory alloy, which is a special alloy that can automatically restore its plastic deformation to its origi... |
 |
Titanium Anode & Electrode | The procedure entails brushing, sintering, and electroplating. The coating's components and quantities vary depending on the purpose. It is typical... |
 |
Molybdenum Target | Molybdenum targetinclude molybdenum plane targets (molybdenum round targets and molybdenum strip-type targets) and molybdenum rotating targets. ... |
Same products
 |
The third generation 43 series lean pipe aluminum alloy pipe | 卖方: WJ-LEAN Technology Co., Ltd. | Diameter 43mm standard size 1.7mm thickness anodized aluminum alloy tube for Karakuri system.43 s... |
 |
Suction Plus Endotracheal Tube | 卖方: Gcmedica Enterprise Ltd.,(Wuxi) | Enhancing Airway Management with the Suction Plus Endotracheal Tube The Suction Plus Endotrachea... |
 |
Suction Catheter | 卖方: Gcmedica Enterprise Ltd.,(Wuxi) | The Essential Features of Suction Catheters for Effective Airway Clearance Disposable suction ca... |
 |
Suction Canister Soft Liner | 卖方: Gcmedica Enterprise Ltd.,(Wuxi) | Enhancing Safety and Efficiency with Suction Canister Soft Liners in Healthcare Settings In heal... |
 |
Suction Bubble Tubing | 卖方: Gcmedica Enterprise Ltd.,(Wuxi) | Discover the Versatile Features of Suction Bubble Tubing for Optimal Adaptability When it comes ... |
