For Large And Medium-sized Casting Sand Mold Stamping Sand Rammer
D9 Sand rammer applying：1、It is working capacity is comparatively large and is used for tamping large and Middle sand mould castings.2、It can also be used for roding concrete and tile mills and for smashing and making adobes or repairing furnace liners,Website:, etc in construction.3、sand rammer driven by compressed air as one of the mechanized hand tools, used in stamping of medium-sized casting sand mold, can also be used in the concrete and bricks etctechnical data： Overall length：1140mm Weight：9.5kg Piston diameter: 32mm Impact frequency：≥10Hz Air consumption：≤15L/S Hose size：Φ13mm Piston stroke：120mm It is used our pressure：0.63Mpa
Other supplier products
|
|
|
G7 Pneumatic hammerapplying：1、Used in hatching brick and concrete walls.technical data： Overall length：470mmWeight：7.8kgImpact frequency：≥22HzImpac... |
|
|
|
C6B Chipping hammerapplying： 1、Mainly used for chipping different metals in boiler,Website:, shipbuilding and metallurgy industries as well as anot... |
|
|
|
CZ2 Chipping hammerapplying： 1、Used for grooving before welding and clearing spatter after welding and leveling up burr. technical data：... |
|
|
|
SJ125×90°Air angle grinderapplying： 2、It is used for cutting the metal sheet and the small steel.technical data： Max Grinder Size :125mm Free Speed... |
|
|
|
D9 Sand rammer applying：1、It is working capacity is comparatively large and is used for tamping large and Middle sand mould castings.2、It can also ... |
供应产品
Same products
