Cylinder Inner Surface Hardening Inductor
Cylinder Inner Surface Hardening InductorCylinder inner surface hardening generally use scanning quenching. Since the cylinder liner wall thickness, while the inner surface heating quenching, on the outer surface of the cylinder liner also assisted spray liquid cooling can reduce the cylinder liner deformation.Features:1.Concentric bus, there are three copper tubes, and between the innermost layer of brass 2,3 pass into the quenching medium is ejected directly from the liquid discharge hole.2.Below it is equipped with a coil positioning pin bake lite plate to prevent the work piece and the coil collide. This high efficiency heating sensor hole, 8KHz power, quenching Φ123mm hole in 140KW output power, scanning speed of up to 10.7mm / s.
Other supplier products
|
|
|
GS-ZP-400 Induction Annealing MachineContents:It is easy to adjust the output power, fast response, accurate control and heating conditions. And it... |
|
|
|
Gear buried oil quenching machine toolFor some special parts, they are for heating and quenching in oil lever in order to reduce the problem of dis... |
|
|
|
GS-ZP-600 Induction Annealing EquipmentContents:Induction annealing which is a common induction heating application of high-frequency induction hea... |
|
|
|
Spindle pole induction hardening machine toolSpindle pole is an important part of textile machinery special parts on the spindle. The horizontal qu... |
|
|
|
A Set of Steel Billet Continuous Casting and Rolling Heating EquipmentZhengzhou Gous continuous casting steel billet reheating equipment not only s... |
供应产品
Same products
