PTFE Medium-size Particle Resin
PTFE medium-size particle resinMain Technical PropertiesFT-G90AppearanceWhite powder, no impuritiesTensile strength, Mpa≥25.5Elongation at break, %≥250Bulk density, g/L500±100Average size, d50 µ m60-100Moisture, % ≤0.03Melting point, °C327±5Standard relative density2.13-2.18Thermal Instability Index, ≤50Electric intensity, MV/m ≥60Product characters:1. The partial size is uniform, suitable for skived molding big plate and turning film.2. G-90 can replace some products of molding powder, and has good brightness in the appearanceApplicationMake tube, rod, plate and seal material, etc.Packing, Storage & Transportation• λ Packed with sealed PVC bag, load in Melting peak temperature proof paper barrel. The net weight is 20kg per barrel.• λ Not classified as hazardous for transport. During transportation and storage, avoid heavy shaking, and prevent from heating. It is better to load in refrigerator during transportation.• λ It should stock in clean, cool and dry warehouse, prevent from agglomeration and contamination.
Other supplier products
|
|
|
PTFE Molding PowderMain Technical PropertiesFT-4TMFT-4TN-SAppearanceWhite powder, no impuritiesTensile strength (Mpa)≥36≥35.0Elongation at break %≥... |
|
|
|
R404AR404A is a colorless gas under ordinary temperature, and a colorless & transparent liquid under the pressure of itself,mixed by R125, R134a an... |
|
|
|
PVDF Li-battery Grade FTH-223CharacteristicPropertiesSpecificationASTM Test standardAppearanceWhite and semi-transparent pellets/Density(g/cm3)1.74... |
|
|
|
1,3,3,3-Tetrafluoropropene(HFO-1234ze) is a hydrofluoroolefin. It was developed as a "fourth generation" refrigerant to replace R134a and as a blow... |
|
|
|
PVDF Molding Grade FTH-213 Characteristic Physical properties Specification ASTM Test standard MFR(g/10min)1～10ASTM D1238, 2300C/12.5kgAppear... |
供应产品
Same products
