.

Custom Ca-Fe Cored Wire

Calcium iron cored wire is made by mixing calcium and iron powder in a certain proportion.

Calcium iron cored wire is composed of 25-35% calcium particles, the rest of which is the mixture of iron powder. The cored wire is made of strip steel. The general specifications are mainly calcium 30 and calcium 40. The domestic and foreign iron and steel enterprises usually use calcium iron-clad wire for calcium treatment of low carbon, ultra-low carbon, low silicon steel, and pure steel with strict requirements on the morphology and quantity of inclusions.

Advantages of cafe cored wire

  1. wire feedingmachine, melt in the depth of molten steel, relieve the nozzle clogging, to play the role of deoxidization, desulfurization, and eliminating inclusion.

Specifications of Cafe Cored Wire

Type

Composition%

Diametermm

Steel strip thicknessmm

Powder weightg/m

Ca-fe

Ca30

13±0.5

240

The outer diameter of the coil: 1100mm

In addition to cafe cored wire, other types of alloy cored wire are also provided by Yurui Metallurgical Material.

The above mixtures and specifications can be supplied by customers' requirements.

What Cored Wire Support Yurui Offer For You?

FAQ of Ca-Fe Cored Wire

What is the composition of CaFe cored wire?

The outer layer of CaFe cored wire is a kind of cold-rolled steel strip, which is mainly because the steel strip has good plasticity and toughness, and can play a good role in coating. The calcium iron powder is coated by professional wire pressing equipment as the wire core, so as to make a linear CaFe cored wire.

What are the important parameters of CaFe cored wire?

There are two basic parameters of the CaFe cored wire, one is the content index of the CaFe cored wire, the other is the wire diameter of the CaFe cored wire. The content index is usually related to the demand of smelting steel, and the wire diameter is mainly related to the requirements of wire feeding equipment.

How to use CaFe cored wire?

Put the CaFe cored wire into the wire feeding equipment, and then insert it into the molten steel or molten iron through a certain inclined angle, so that the CaFe cored wire can fully melt in it and produce chemical reaction. The effect of different insertion depth is not the same. Therefore, the angle and insertion depth should be adjusted according to the results through strict calculation.

If you want to know anything about barium siliconin our products, please visit our website.


在线联系供应商

至: Jiangyin Yurui Metallurgical Material Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Mg-Fe Nitride Cored Wire
Mg-Fe Nitride Cored Wire Mg-Fe Nitride Cored Wire Utilisation Ferromanganese nitride cored wire is mainly used as a nitrogen additive in steel making. It can improve the st...
Custom Carbon Cored Wire
Custom Carbon Cored Wire Carbon Cored WireUtilisation Carbon Cored Wire is used for recarburization in steel making. It can control the carbon content of the steel. It ca...
Custom Carbon Cored Wire
Custom Carbon Cored Wire Carbon Cored Wire Utilisation Carbon Cored Wireis used for recarburization in steel making. It can control the carbon content of the steel. It can ...
Custom Aluminum Block
Custom Aluminum Block The 99 aluminum block has better conductivity, ductility, reflectance and corrosion resistance. It can be applied to high purity sputtering targ...
Custom Silicon Calcium Barium Cored Wire
Custom Silicon Calcium Barium Cored Wire Silicon Calcium Barium Cored Wire Utilisation Silicon Calcium BariumCored Wire is a good deoxidizer and desulfurizer. Barium effectively reduces t...
供应产品

Same products

Air insulated Dry type transformer VPI
Air insulated Dry type transformer VPI 卖方: TAILI ELECTRIC CO.,LTD. Air insulated Dry type transformer VPI TAILI SG(B) air-barrier dry-type transformer( VPI) is des...
Cast Resin Dry Type Transformer with Cooling Fan
Cast Resin Dry Type Transformer with Cooling Fan 卖方: TAILI ELECTRIC CO.,LTD. Cast Resin Dry Type Transformer with Cooling Fan Taili’s advanced epoxy resin casting proc...
1250kVA Dry type Transformer for Bangladesh
1250kVA Dry type Transformer for Bangladesh 卖方: TAILI ELECTRIC CO.,LTD. 1250kVA Dry type Transformer for Bangladesh Taili's advanced epoxy resin casting process ensures...
35kV Dry-type transformer with OLTC
35kV Dry-type transformer with OLTC 卖方: TAILI ELECTRIC CO.,LTD. 35kV Dry-type transformer with OLTC Taili's35kV Dry-type Transformer with OLTC (On-Load Tap Chan...
Cast Resin Dry Type Transformer
Cast Resin Dry Type Transformer 卖方: TAILI ELECTRIC CO.,LTD. Cast Resin Dry Type Transformer IEC/ANSICast Resin TransformersfromTAILI Electric, is difference...