Energy meter calibration -- CNKP-S3000 Three phase 5 position 0.05% Accuracy 0-120A
Energy meter calibration -- CNKP-S3000 Three phase 5 position 0.05% Accuracy 0-120A
- KP-S3000 three phase energy meter test bench is a new generation, high precision energy meter calibration equipment. It uses the advanced technology and electronic components available in 90 decade . The test bench can be operated from embedded keyboard or operated from PC software.
- 1) Equipped with electronic phantom load power source, assuring high stability, security and large output capacity. 2)Automatic adjustment of current measurement range. Fault self-detection in voltage amplifier and current amplifier. 3) Equipped with RS-232C interface, can be operated from software. 4) Test results can be saved to database, can be inquired from database and can be export to EXCEL file and then printed out.
- Specification of power source: Power and consumption: Power supply: 3P4W 3x220V±10% Max consumption: 6000VA
Current source: Output current: 3×0.1A-3×100A Adjusting resolution: 0.01% (min. 0.0001A) Power factor: 0~3600; resolution: 0.10 Output frequency: 45Hz~65Hz; THD(sine wave output): <1.0% Stability of current during sine wave output: 0.1% (180s)Output wave: sine wave 2-21 harmonic wave, total should be less than 40% Odd harmonic waveform Sub harmonic waveform Output capacity: 50VA per meter position(max) Voltage source: Output voltage: 3×30V - 3×400V Load: The Load could be resistor / inductive / capacitive(<4uF) Adjusting resolution: 0.01% (min. 0.1V) Output frequency: 45Hz~65Hz; THD (sine wave output): <1.0% Voltage stability of power source during sine wave output: 0.1% (180s) Output wave: sine wave 2-21 harmonic wave, total should be less than 40% Output capacity: 15VA per meter position
- Power and consumption: Power supply: 1P2W 220V ±10%, 50Hz or 60Hz; Max consumption: 30VA Voltage input: 3×30V-3×480V (AC) Current input: 3×0.01A-3×100A (AC)
Accuracy:0.05% (0.02% Optional) Active power: 0.05% (PF>0.5) Reactive power: 0.1% (PF>0.5)Warm up time: < 2 minutes Dimension: 482mm X 380mm X 140mm Weight: <7.5 kg
- Impulse of tested meter could be: TTL / OC / Optical head Max. frequency of impulse could be: 200Hz Error display range: 0.001%-99.99%
- 1) Three phase power source 2) Three phase meter rack 3) KP-3100 Reference meter 4) Impulse input cable 5) RS232c communication cable 6) Optical sensor etc.all necessary parts
在线联系供应商
Other supplier products
| impulse Current test system | impulse Current test system Impulse Current Test Systems are manufactured for testing equipment applied in medium and high voltage transmission &am... | |
| Partial Discharge Testing Detector Testing instrument | Partial Discharge Testing Detector Testing instrument RequestedService Condition: Ambient temperature:0~20℃±2℃ Relative humidity:≤80% Po... | |
| SF6 reference Capacitor - 400kV 50pF compressed gas standard capacitor | Genneal Information: Compressed air standard capacitor is a necessary instrument in every HV test lab. It is used to measure the capacitance of cap... | |
| Transformer Plant Design | Transformer Plant Design We will be willing to provide whole-process engineering consulting servicesfor you: Preparingfeasibility study reportor Pr... | |
| Shuttle kiln for ceramic products | Shuttle kiln for ceramic products Brief introduction of shuttle kiln: shuttle kilnandtunnelkilnare important sintering equipment in ceramic and pro... |
Same products
| Air insulated Dry type transformer VPI | 卖方: TAILI ELECTRIC CO.,LTD. | Air insulated Dry type transformer VPI TAILI SG(B) air-barrier dry-type transformer( VPI) is des... | |
| Cast Resin Dry Type Transformer with Cooling Fan | 卖方: TAILI ELECTRIC CO.,LTD. | Cast Resin Dry Type Transformer with Cooling Fan Taili’s advanced epoxy resin casting proc... | |
| 1250kVA Dry type Transformer for Bangladesh | 卖方: TAILI ELECTRIC CO.,LTD. | 1250kVA Dry type Transformer for Bangladesh Taili's advanced epoxy resin casting process ensures... | |
| 35kV Dry-type transformer with OLTC | 卖方: TAILI ELECTRIC CO.,LTD. | 35kV Dry-type transformer with OLTC Taili's35kV Dry-type Transformer with OLTC (On-Load Tap Chan... | |
| Cast Resin Dry Type Transformer | 卖方: TAILI ELECTRIC CO.,LTD. | Cast Resin Dry Type Transformer IEC/ANSICast Resin TransformersfromTAILI Electric, is difference... |















