12 Pin Automotive Connector Housing
Langrun Electric is addressing the car electrical connectionsindustry. Its 12 pin automotive connector and housing is PCB plug housing that is always used in wire to board applications.
12 pin automotive electrical connectorand housing or 12 pin automotive connectoris made from PA66 or PBT. PA66 has good mechanical strength, excellent toughness, oil resistance, good fluidity and formability, and good water absorption. It is widely used in automobile and shell products. PA66 maintain stable mechanical performance for automotive connector and housing.
There are two types of 12 pin automotive connectorand housing products depending on the location and function. The first type is non-waterproof connector, which is generally used in a dry environment that will not be exposed to rain. The other is the waterproof connector, which needs to be used in the wet working environment to prevent the electrochemical corrosion of automobile related parts and affect the physical and electrical functions of the waterproof connector.
The Electrical Performance of 12 Pin Automotive Connector Housing
01 Contact resistance
High quality connector should have low and stable contact resistance. The contact resistance of the connector ranges from a few millions to tens of millions.
02 Insulation resistance
Insulation resistance is a measure of the insulation performance between the contacts of electrical connectors and between the contacts and the housing. The order of magnitude ranges from hundreds of megabytes to thousands of megabytes.
03 Electrical strength
Electrical strength, or voltage and dielectric voltage resistance, is the ability to withstand the rated test voltage between the contacts of the connector or between the contacts and the housing.
在线联系供应商
Other supplier products
 |
7 Pin Automotive Connector Housing | 7 pin automotive connectorhousing always assemble with wiring harness are attached to each part of the vehicle. The vehicle is divided into two par... |
 |
9 Pin Automotive Connector Housing | Performing different functions, all of the 9 pin automotive connectormanufactured by Langrun Electric can meet the high requirements of REACH and R... |
 |
282106-1 Female Fuel Tank Pump Connectors Superseal Waterproof Connector Housing | With the 30 years of mold manufacturing experience, Langrun is capable of product development and mould processing. We pay more attention to qualit... |
 |
3 Pin Automotive Connector Housing | Automotive electrical connectionsare widely used in every parts of the car connector. Use with wiring harness, they are able to offer the connectio... |
 |
Waterproof Cable Tie | Waterproof cable tieis a kind of one-piece fixing tie with rubber seal. Mainly used in the automotive industry, especially suitable for car body ap... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | 卖方: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | 卖方: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
