IEC 62196-2 EV Charging
AG ELECTRICAL is one of the top electric vehicle charging equipment manufacturers, our GBT EV Charging products are sold to many countries all over the world. Our GBT EV Charging Components can meet the needs of different customers in different areas to the maximum extent.
The iec 62196 standard(European Electrotechnical Commission's conductive charging interface standard for electric vehicles) has a variety of EV charging systems, which clearly specifies various plug, type 2 EV charging socket, and connector products used in the household, EVSE and EV end entrance. IEC 62196-2:2016 applies to plugs, socket-outlets, vehicle connectors, and vehicle inlets with pins and contact-tubes of standardized configurations, herein referred to as accessories.
It can meet the requirements of AC charging-conductive charging connection of electric vehicles with a rated voltage not more than 480v, 50-60Hz, three-phase not more than 63A and single-phase not more than 70A. The standard products can be compatible in Europe, which greatly facilitates users and equipment manufacturers, and also reduces the waste of energy.
iec 62196 type 2EV Charging Product List
IEC Dummy Socket
The advantages of IEC Dummy Socket is that it could be fixed on the wall or any mounted plate.
EV Portable Charger Type 2 Mode 2
EV Charging Cable Type 2
GBT EV Charging Cable conform to the provisions and necessities of GB/T20234.2-2015, and it can cost all EV manufactured in china, correctly and effectively with excessive compatibility.
TYPE2 AC EV Charging Socket
GBT EV Charging Socket has beautiful appearance, and its prevention cap can be installed on the left side, the proper aspect or the the front of it.
TYPE2-TYPE2 Charging Mode3
TYPE2-TYPE2 Charging Mode3 use reliable materials, and it has many advanced features.
TYPE2-TYPE1 Charging Mode3
TYPE2-TYPE1 Charging Mode3 has excellent protection performance.
TYPE2-GBT Charging Mode3 Cable
TYPE2-GBT Charging Mode3 Cable has a delighting appearance. Hand-neld design conform to the ergonomic principle, plug conveniently.
TYPE2-TYPE1 Adaptor Charging Mode3
Shell Material of TYPE2-TYPE1 Adaptor Charging Mode3 is thermoplastics, flame retardant grade UL94-V0.
TYPE2-TYPE2 Spiral Charging Mode3
TYPE2-TYPE2 Spiral Charging Mode3conforms to IEC 61851-1 2010 charging mode 3 connection mode B2.
IEC 62196-2 EV Charging-FAQs
Do IEC Chargers Come In Other Colors?
AG ELECTRICAL Can customize a variety range of colors as long as we get your RAL code. Currently available colors in stock are Black + Orange, Black + Blue, Black + Green, Black + Grey, and White+Grey).
What is TPU Cable?
TPU cable material is named as thermoplastic polyurethane elastomer rubber, and it is the best material in the market right now due to its advanced characteristics. Most important of all, it is in line with the latest requirements of the EU IEC standards. The TPU material applied for AG EV Charging cable is from world top supplier and it is RoHS and REACH certified. This kind of cable is thinner (smaller outside diameter), longer service life, and low temperature resistance.
What are the Differences between AG ELECTRICAL IEC TYPE 2 Connectors and Other Brands? What are the Advantages?
AG ELECTRICAL IEC TYPE 2 Connectors has the following advantages:
- Stylish design with better Identification language
- Free customize color to meet the needs of different customer groups
- Special internal waterproofing treatment, protection level up to IP55 (working condition). IEC requirement is IP44.
- TPU material cable (Self Produced Cable with decades experience), and everything can be changed and customized per to your request.
- We support OEM with your own brands products.
What is the Function of Actuator Locking Device in the TYPE 2 SOCKET?
Motor actuator is much more reliable than Solenoid Lock especially when it is very cold. The basic function of it is anti-theft, safe and reliable.
Is the IEC EV Charging Products from AG ELECTRICAL Safe for Users?
We have delivered thousands of products into the EU market, and the feedback is pretty good with our competitive price and reliable quality. There are ZERO safety issues so far for AG ELECTRICAL iec 62196standard charging products. Most important of all, “Customer First” is the core value of AG ELECTRICAL, and we provide service with AG FAST RESPONSE, AG FLEXIBILITY, and AG RELIABILITY.
在线联系供应商
Other supplier products
 |
SAE EV Charging Socket | Mechanical Properties Contact Pin: Copper alloy, silver or nickel plating Sealing gasket: rubber or silicon rubber Mechanical life: no-load plug&... |
 |
SAE EV Portable Charger TYPE 1 Mode 2 | EV Charging Portable Type1 Mode2 Features Mode 2 chargerconforms to the provisions and requirements of SAE J1772-2012, it can charge all EV manufa... |
 |
GB/T EV DC Charging Socket | Mechanical Life lMechanical life: no-load plug>10000times lInsertion force:<140N Applied Material Shell material: thermoplastics,... |
 |
EV Portable Charger Type 2 Mode 2 | EV portable 240 volt ev charger/ portable ev fast charger2 Features Conform to the provisions and requirements of IEC 62196-2. High compatibility.... |
 |
GB/T EV AC Charging Socket | Mechanical Life Mechanical life: no-load plug>10000times Insertion force:<100N Applied Material Shell material: thermoplastics, flame... |
Same products
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | 卖方: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | 卖方: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay... |
