FPV ESC
Highly Integrated & Compact
High-quality Components
BLHeli-S Firmware Ready
DShot150/300/600 Ready
Silent operation
Racing Drone ESC
An electronic speed control or rapid ESCis an electronic circuit that controls and regulates the speed of an electric motor. It may also provide reversing of the motor and dynamic braking. Miniature electronic speed controls are used in electrically powered radio-controlled models. Full-size electric vehicles also have systems to control the speed of their drive motors.
Highly Integrated & Compact
20A 4in1 BLHeli-S DShot600 not only includes 4 high-performance 20A esc fpv, but also a volt monitoring port which allows FC to monitor the voltage in real time (on condition that the FC supports this function).
With the incredibly small size, the installation and wiring can be very simple and easy when pairing it with the Flight Controller. It’s an ESC specially designed for super mini-sized indoor FPV(s).
High-quality Components
The use of EMF8BB21F16G MCUs with the operating frequency of up to
48MHz, imported high quality MOSFETs, 3-in-1 drive ICs and ceramic
capacitors, 3-ounce copper, and 6 layers of PCBs guarantees less heat,
higher efficiency and rapider response.
BLHeli-S Firmware Ready
The ESC (with great performance and rich functions)
uses the original BLHeli-S firmware and supports adjusting
parameters or upgrading firmware via different methods
(i.e. via throttle signal wire with using other development board
or a FC flashed with the Cleanfight / Betaflight firmware).
DShot150/300/600 Ready
Besides the regular PWM mode, Oneshot125/Oneshot42/Multishot modes, the latest DShot150/300/600 modes are also supported. In DShot150/300/600 modes, the ESC has great anti-interference performance and rapid response.
Hardware Generated PWM & Damped Light Mode
The ESC firmware uses hardware generated motor PWM for smooth
throttle response and silent operation. Damped light does regenerative
breaking, causing very fast motor retardation, and it inherently also
● EFM8BB21F16G MCU, pipelined 8-bit C8051 core with 50 MHz maximum operating frequency.
● Dedicated high frequency driver, makes the start more smooth. ESC maximum speed is limited to 500k eRPM.
● Two layers tower structure between 4in1 ESC and FC using quick pin connection. Dual ways signal transmission makes the
flight more stable
● Exposed pads for Battery and Motor wires, fast welding without additional disassembly, makes the installation faster and more convenient.
● F3 flight controller, supports PPM, PWM and SBUS remote control / receiving mode.
● FC integrated OSD, also integrated 5V/1A, 12V/500mA for VTX, camera, buzzer, LED and other peripheral devices ;
provided several silicone cables for connectors on FC, and will give you an unprecedented experience for installation;
● Built-in current meter, OSD directly display the real-time current without any additional connection;
● BLHeli-S firmware. It designed for superior performance in multirotor, and uses hardware generated motor PWM for smooth
throttle response and silent operation.
● The code supports regular 1-2ms pulse width input, as well as Oneshot125 , Oneshot42 and Multishot .
● Supports Dshot150, Dshot300 and Dshot600.Dshot is digital signal, anti-interference ability is stronger, and do not need throttle calibration.
Established in 2002, Shenzhen TitanFlying Technology Co., Ltd(TTF) is located in Shenzhen University Town, known as the Silicon Valley of China. TTF has more than 20 years' experience on mechanical processing.
在线联系供应商
Other supplier products
| Air Selfie Drone S1 | Palm-sized, incomparably exquisite Outdoor protective case Flexible blades Electric Fence ABS shell Drone Air Selfie –S1 Foldable poc... | |
| TTF M2 Indoor Mini Children'S Toy Drones | HD Video/ Photography WIFI APP control Real-time Transmission Gyro Stable System Hight Power Capacity Product Description With delicate frame desi... | |
| Drone Charger E3 | E3 Lipo(2-3s) Balance Charger The absolute cheapest charger Balance automatically Reverse polarity protection Explanation of LED Status Drone ... | |
| AG Drone Motor Series | Shenzhen TitanFlying Technology Co., Ltdis not an easy task to order or purchase from distant supplier, especially in international trade. This is ... | |
| 无人机框架 | 具有良好的四轴飞行器框架与具有良好的电子学一样重要,因为无人机依靠轻便坚固的外壳来安装组件。有无限的框架设计,在形状,材料和尺寸上有所不同。僵硬的框架可以产生更好的飞行特性,因为可以减少弯曲和翘曲,这意味着您的四轴飞行器将能够平稳稳定地飞行。自定义无人机框架 无人机框架最常见的迷你四框架材料... |
Same products
| Air insulated Dry type transformer VPI | 卖方: TAILI ELECTRIC CO.,LTD. | Air insulated Dry type transformer VPI TAILI SG(B) air-barrier dry-type transformer( VPI) is des... | |
| Cast Resin Dry Type Transformer with Cooling Fan | 卖方: TAILI ELECTRIC CO.,LTD. | Cast Resin Dry Type Transformer with Cooling Fan Taili’s advanced epoxy resin casting proc... | |
| 1250kVA Dry type Transformer for Bangladesh | 卖方: TAILI ELECTRIC CO.,LTD. | 1250kVA Dry type Transformer for Bangladesh Taili's advanced epoxy resin casting process ensures... | |
| 35kV Dry-type transformer with OLTC | 卖方: TAILI ELECTRIC CO.,LTD. | 35kV Dry-type transformer with OLTC Taili's35kV Dry-type Transformer with OLTC (On-Load Tap Chan... | |
| Cast Resin Dry Type Transformer | 卖方: TAILI ELECTRIC CO.,LTD. | Cast Resin Dry Type Transformer IEC/ANSICast Resin TransformersfromTAILI Electric, is difference... |















