Via In Pad Fr4 PCB
Via In pcb board material fr4, using copper plating or epoxy to fill holesfor circuit board factor, prevent solder paste or flux from flowing into the via in pad, avoid solder ball getting into via or solder mask cover on pad and cause false soldering. HUIHE CIRCUITS Via In Pad Fr4 PCB has passed ISO9001/ISO13485/IATF16949/UL/RoHS/REACH certification.
What Is A Hole-In-The-Panel Circuit Board?
The hole in the disk is an important part of the multi-layer PCB. It is not only responsible for the main functions of the PCB, but also the cost of drilling usually accounts for 30% to 40% of the PCB manufacturing cost. In short, the holes pressed on the pads on the PCB can all be called holes in the disk.
Processing Requirements For Hole Plugs In The Disk
No solder mask ink entering the hole
There should be no tin beads hidden in the hole
No explosive oil, ink pads, making it difficult to mount components, etc.
Common Sense Of Circuit Board Plug Hole
Prevent the tin from penetrating the component surface from the via hole to cause a short circuit when the PCB is wave soldered
Avoid flux residue in the vias
Prevent the tin balls from popping up during wave soldering, causing short circuits
Prevent surface solder paste from flowing into the hole, causing false soldering and affecting placement
Huihe Circuits is a professional pcb circuit manufacturer, we provide fr4 circuit board material, fr4 circuit board manufacturing, fr4 pcb board, fr4 pcb datasheet, fr4 pcb sheet, fr4 pcb thickness, pcb manufacturing serviceand etc. For more information, please feel free to contact us!
在线联系供应商
Other supplier products
 |
14 Layer Blind Buried Via PCB | Number of layers: 14 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/5mil Inner layer W/S: 4/3.5mil Thickness: 1.6mm Special proce... |
 |
2 Layer Taconic ENIG PCB | Number of layers: 2 Surface finish: ENIG Base material: Taconic TLY-5A Outer Layer W: 1.046mil Outer layer S: /mil Thickness: 0.94mm Advantag... |
 |
2 Layer OSP Impedance Control Half Hole PCB | Number of layers: 2 Surface finish: OSP Base material: FR4 Outer Layer W/S: 6/4mil Thickness: 1.0mm Special process: impedance control+half ho... |
 |
Communication Equipment PCB | In order to shorten the signal transmission distance and reduce the signal transmission loss, the 5G communication board,Gradually move towards hig... |
 |
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board | Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner layer W: 21mil Thickness: 0.4mm Special process: im... |
Same products
 |
PH-907 防水笔式自动校正酸度/温度计 | 卖方: 科立龙电子股份有限公司 | 产品说明： PH-907防水型PH测试笔，大屏幕酸度温度同时显示，具有优良的防水性和野外适用性。防水等级为IP67。 所有的读数都经过自动温度补偿（ATC）。温度传感器直接接触被测量溶液，... |
 |
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS | 卖方: ZK Electronic Technology Co., Limited | Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ... |
 |
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF | 卖方: ZK Electronic Technology Co., Limited | Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ... |
 |
Heavy Copper PCB Manufacturer | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material... |
 |
8 Layer ENIG Half Hole Custom PCB | 卖方: Xinfeng Huihe Circuits Co., Ltd. | Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay... |
