α-BBO Crystals
α-BBO (α-BaB2O4) is a negative uniaxial crystal which has large birefringence over a broad transparent range of 190nm to 3500nm. α-BBO is an excellent crystal especially in UV and high power applications.
The physical, chemical, thermal, and optical properties of alpha-bibo nonlinear crystalare similar to those of Beta-BBO. However, there is no second order nonlinear effect in alpha-BBO crystal due to the centrosymmetry in its crystal structure and thus it has no use for second order nonlinear optical processes. Instead, alpha-BBO is widely used for fabrication of polarizers, polarizing beam displacers, phase retarders, birefringent plates, and time delay compensators especially those for UV and high power lasers.
Applications of α-BBO Crystals
High power Beam displacers for isolators.
High power Polarizer
Time delay compensators
Advantages of α-BBO Crystals
High UV transmittance
Large birefringence
High damage threshold
Specifications of α-BBO Crystals
|
Tolerance of cutting angle |
△θ≤±0.25°,△φ≤±0.25° |
|
DimensionTolerance |
±0.1mm |
|
Flatness |
λ/10 @ 632.8nm |
|
Wavefront distortion |
λ/4@ 632.8nm |
|
Surface Quality |
10/5 per MIL-O-13830B |
|
Parallelism |
10″ |
|
Perpendicularity |
10′ |
|
Bevel/Chamfer |
|
|
Chips |
<0.1mm |
|
Clear Aperture |
>95% |
|
Coating |
AR/HR (IAD, EB, IBS) coating upon customer’s request |
|
Damage Threshold |
750MW/CM2 at 1064nm, TEM00, 10ns, 10Hz |
|
Quality Warranty Period |
One year under proper use |
Basic Properties of α-BBO Crystals
|
Transparency Range |
190-3500nm |
|
Hygroscopic Susceptibility |
Low |
|
Density |
|
|
Mohs Hardness |
|
|
Thermal Expansion Coefficients（/℃） |
|
|
Damage Threshold |
1GW |
|
Refractive Indices |
no=1.6776，ne=1.5534，at 532nm no=1.6579，ne=1.5379，at 1064nm |
|
Sellmeier Equation（λ in μm） |
no²=2.7471+0.01878/(λ²-0.01822)-0.01354λ²ne²=2.37153+0.01224/(λ²-0.01667)-0.01516λ² |
在线联系供应商
Other supplier products
 |
BaTiO3 Substrates | BaTiO3 single crystal has excellent photorefractive properties, high self-pumped phase conjugate reflectivity and two-wave mixing (optical amplific... |
 |
BGO Scintillators | BGO scintillation crystalis one of the most common oxide scintillation materials. It exhibits stable physical and chemical properties, high mechani... |
 |
BGO Array | BGO (Bi4Ge3O12) bismuth germanate crystal is one of the most common oxide scintillation materials. It exhibits stable physical and chemical propert... |
 |
OST Photonics BaTiO3 Substrates | BaTiO3 single crystal has excellent photorefractive properties, high self-pumped phase conjugate reflectivity and two-wave mixing (optical amplific... |
 |
OST Photonics Achromatic Lenses | Achromatic lenses are an essential component in many optical systems, and Ost Photonics takes pride in offering a wide range of high-quality option... |
Same products
 |
Air insulated Dry type transformer VPI | 卖方: TAILI ELECTRIC CO.,LTD. | Air insulated Dry type transformer VPI TAILI SG(B) air-barrier dry-type transformer( VPI) is des... |
 |
Cast Resin Dry Type Transformer with Cooling Fan | 卖方: TAILI ELECTRIC CO.,LTD. | Cast Resin Dry Type Transformer with Cooling Fan Taili’s advanced epoxy resin casting proc... |
 |
1250kVA Dry type Transformer for Bangladesh | 卖方: TAILI ELECTRIC CO.,LTD. | 1250kVA Dry type Transformer for Bangladesh Taili's advanced epoxy resin casting process ensures... |
 |
35kV Dry-type transformer with OLTC | 卖方: TAILI ELECTRIC CO.,LTD. | 35kV Dry-type transformer with OLTC Taili's35kV Dry-type Transformer with OLTC (On-Load Tap Chan... |
 |
Cast Resin Dry Type Transformer | 卖方: TAILI ELECTRIC CO.,LTD. | Cast Resin Dry Type Transformer IEC/ANSICast Resin TransformersfromTAILI Electric, is difference... |
