.

Industrial Control Line AI/AO Analog signal RS485 Protector

The control signal lightning protection device is designed to protect the control line system to protect the electrical and electronic equipment's signal line from the impact of the lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage. The interface form of the product is crimp type, which protects 1-4 lines, and can be used in industrial control fields with different voltage specifications of 6-48V.

Control line protectorsis designed for control line system to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over voltage, transient operation and resonance over voltage. The control line surge arrester can be used in RS232, LAN SPD, MODEM BUS, etc.

Features of Lan Protector for Control Signal System

Low insertion loss, fast response

Low limiting voltage

Precise limiting voltage

Strong discharge current

Crimping

Application of Lan Surge Protector for Control Signal System

LAN, CAN, V.24/RS232-C, MODEM BUS.

TOKEN-RING, INDUSTRIAL BUS.

Suitable for the signal's transmission rate protection under the same voltage and same specifications.

Analog signal lightning arrester.

Protect power supply and control line for camera.

Loss prevention system device; Security system; Security integration.

IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system.

Technical Parameters of Lan Surge Protector for Control Signal System

Model

D05Y2(-A)

D05Y4

D12Y2(-A)

D12Y4

D24Y4

D36Y2(-A)

Lightning projection zone(LPZ)

2

Standards Compliance

IEC61000, EN60950

According to IEC61643

III

According to DIN VDE6075 Part6(Draft 11.89) A1, A2

D

Max continuous operating voltage Uc

5V

12V

24V

36V

Nominal discharge current (8/20µs) In

3KA

Max discharge current Imax (8/21µs) Imax

5KA

Limiting Voltage(10/700µs)

20V

40V

100V

120V

Cut-off Frequency fG

20MHz

Response time tA (L-N/N-PE)

1ns

Protection port

2

4

2

4

4

2

Mounting

Be Installed between protected equipment and signal line

Max connecting line diameter

  1. 2

Recommend connecting line diameter

1mm2

Transmission standards

10Mbps

Dimension

Regular type: 85*25*25mm

DIN rail type: 90*14*65mm

Interface form

Compression plug

IP code (IEC EN 60529)

IP20

Largest terminal installation torque

Material/color

Aluminum/Blue

Insertion loss

≤0.5dB

Working conditions

Temperature: -40 to 85℃, Relative humidity: ≤95%

As a spd manufacturer, we can provide types of spd devicesfor sale, if you are interested, please contact us.



在线联系供应商

至: Shenzhen Techwin Lightning Technologies Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Smart Lightning Protective Devices
Smart Lightning Protective Devices The smart spike guard, Techwin intelligent lightning surge protection device (SPD), adopts the technology of Internet of things big data, integrate...
Intelligent multifunctional SPD monitor and data acquisition device
Intelligent multifunctional SPD monitor and data acquisition device This product is an on-line monitoring and data acquisition device for monitor surge protectors (SPDs). It mainly collects SPD damage status and dam...
Compound Antenna Feeder Protector
Compound Antenna Feeder Protector Designed for antenna coaxial device and receive system not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge. IEE...
SPD for Ethernet Power System
SPD for Ethernet Power System The POE Ethernet series lightning protection device is a lightning protection devicedeveloped for POE network power supply equipment in accordance ...
AC Power SPD
AC Power SPD AC power SPDis mainly applicable to the power distribution systems for Class I / II / III( Type1, type 2, type3) protection. Surge arresters for AC...
供应产品

Same products

CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS 卖方: ZK Electronic Technology Co., Limited Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ...
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF
CAPACITOR EEF-CX0J10CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF1R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF 卖方: ZK Electronic Technology Co., Limited Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ...
Heavy Copper PCB Manufacturer
Heavy Copper PCB Manufacturer 卖方: Xinfeng Huihe Circuits Co., Ltd. Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
8 Layer ENIG Half Hole Custom PCB
8 Layer ENIG Half Hole Custom PCB 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board 卖方: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...