.

Industrial Control Line AI/AO Analog signal RS485 Protector

The control signal lightning protection device is designed to protect the control line system to protect the electrical and electronic equipment's signal line from the impact of the lightning electromagnetic pulse, induced over-voltage, transient operation, and resonance overvoltage. The interface form of the product is crimp type, which protects 1-4 lines, and can be used in industrial control fields with different voltage specifications of 6-48V.

Control line protectorsis designed for control line system to protect electrical and electronic equipment's signal line from the impact of lightning electromagnetic pulse, induced over voltage, transient operation and resonance over voltage. The control line surge arrester can be used in RS232, LAN SPD, MODEM BUS, etc.

Features of Lan Protector for Control Signal System

Low insertion loss, fast response

Low limiting voltage

Precise limiting voltage

Strong discharge current

Crimping

Application of Lan Surge Protector for Control Signal System

LAN, CAN, V.24/RS232-C, MODEM BUS.

TOKEN-RING, INDUSTRIAL BUS.

Suitable for the signal's transmission rate protection under the same voltage and same specifications.

Analog signal lightning arrester.

Protect power supply and control line for camera.

Loss prevention system device; Security system; Security integration.

IASP; VSCS; ESA; ACS; exit-inlet control system; exit-inlet control system.

Technical Parameters of Lan Surge Protector for Control Signal System

Model

D05Y2(-A)

D05Y4

D12Y2(-A)

D12Y4

D24Y4

D36Y2(-A)

Lightning projection zone(LPZ)

2

Standards Compliance

IEC61000, EN60950

According to IEC61643

III

According to DIN VDE6075 Part6(Draft 11.89) A1, A2

D

Max continuous operating voltage Uc

5V

12V

24V

36V

Nominal discharge current (8/20µs) In

3KA

Max discharge current Imax (8/21µs) Imax

5KA

Limiting Voltage(10/700µs)

20V

40V

100V

120V

Cut-off Frequency fG

20MHz

Response time tA (L-N/N-PE)

1ns

Protection port

2

4

2

4

4

2

Mounting

Be Installed between protected equipment and signal line

Max connecting line diameter

  1. 2

Recommend connecting line diameter

1mm2

Transmission standards

10Mbps

Dimension

Regular type: 85*25*25mm

DIN rail type: 90*14*65mm

Interface form

Compression plug

IP code (IEC EN 60529)

IP20

Largest terminal installation torque

Material/color

Aluminum/Blue

Insertion loss

≤0.5dB

Working conditions

Temperature: -40 to 85℃, Relative humidity: ≤95%

As a spd manufacturer, we can provide types of spd devicesfor sale, if you are interested, please contact us.



Send product request

To: Shenzhen Techwin Lightning Technologies Co., Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

2021 New design automatic circuit recloser/ Auto recloser
2021 New design automatic circuit recloser/ Auto recloser TD-CHZ16 protector integrates intelligent control functions such as over-current and short-circuit protection, under-voltage/over-voltage protectio...
SPD for Power Supply
SPD for Power Supply Power surge protector, also known as the lightning protector, is suitable for AC 50/60HZ, rated voltage 220V/380V power supply system, to protect i...
2in 1 SPD for CCTV M10-24 D05J4
2in 1 SPD for CCTV M10-24 D05J4 2 in 1 monitor lightning arrester(power and network), a Kind of SPD, designed for a digital camera to protect camera power, data line from lightnin...
Quarter Wave Surge Protective Device(SPD)N(L16)Access Network RF Protector
Quarter Wave Surge Protective Device(SPD)N(L16)Access Network RF Protector Quarter wave RF surge protectoris designed for the RF system, protecting the signal line of communication equipment from lightning over-voltage, in...
SPD for Solar Power System/PV System
SPD for Solar Power System/PV System What Is SPDin Solar? Lightning combiner box for PV array is installed between PV module and inverter. And SPD in solar system is widely applied in...
All supplier products

Same products

CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS
CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS Seller: ZK Electronic Technology Co., Limited Part Number:CSD16301Q2 Description:CSD16301Q2 TRANSISTOR MOSFET N-CH 25V 6SON TEXAS INSTRUMENTS ...
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF
CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V SMD LF Seller: ZK Electronic Technology Co., Limited Part name:EEF-CX0J101R Description:CAPACITOR EEF-CX0J101R PANASONIC SMD SPEC POLYMER 100UF 6.3V ...
Heavy Copper PCB Manufacturer
Heavy Copper PCB Manufacturer Seller: Xinfeng Huihe Circuits Co., Ltd. Heavy Copper PCB, pcb fabrication up to 12oz, large current, pcb circuitfabrication base material...
8 Layer ENIG Half Hole Custom PCB
8 Layer ENIG Half Hole Custom PCB Seller: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner lay...
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board
4 Layer ENIG Impedance Control Half Hole PCB Electric Circuit Board Seller: Xinfeng Huihe Circuits Co., Ltd. Number of layers: 4 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 6/4mil Inner lay...