Air Blowing Micro fiber Optic Cable
Product Introduction
Air Blowing cable technology is a new way to make significant improvements in traditional fiber optic systems, facilitating the rapid adoption of fiber optic networks and providing users with a flexible, secure, cost-effective cabling system.
The blowing system consists of micro-tubes (single micro-tubes and micro-tubes), micro-cables, fittings and air blowing equipment.
Air Blowing cable technology development
In 1982, BT invented the Air blown cable technology.
In 1987, the British company Berry invented the single Air blown fiber technology.
In 1988, the world's first installation of indoor blown fiber was achieved.
In 1993, the entire system was developed and officially named as a Air blown fiber system and commercialized.
In 1997, the Netherlands air blown 10pcs of ø10mm micro tubes in a ø63/50 mm mother tube. NKF Telecom, a subsidiary of the DRAKA Group, used the air blowing technology and equipment of the Swiss company Politi to realize the commercial use of the network air blowing technology for the first time. This technology covers long-haul trunk lines, metropolitan area networks and fiber-to-the-home in Europe and the United States.
In 1995, former China Ministry of Posts and Telecommunications company cooperated with Swiss company Politi and the United States Dulan Company, for the fist time introduced the world's advanced air blowing cable technology and equipment to China.
The Air Blown Application
Theair blowing micro fiber optical cableis composed of a combination of micro tubes (bundles), optical fibers (bundles), and blowing fiber devices.The air compressor is used as the power source for the traction fiber bundle, and the fiber bundle is quickly sent to the same micro tube bundle in the micro tube, and different types of fibers (beams) can be mixed and blown in different micro tubes.
To achieve fast installation and improved installation quality, all air-blown fiber cable are equipped with international standard prefabricated connectors on one end.
Air Blowing Fiber Optical Cable Machine
The Laying methods of Air Blowing cable compare with other Fiber Optical cable, the tension of the Air Blowing Cable during the laying process is relatively uniform and much smaller.
The Air Blowing cable laying process is simplified and fast.
The Air Blowing cable can lay a long distance in one time. It will reduce the number of joints and reduce the attenuation.
The Air blown cable can greatly reduce the number of manholes and hand holes on the pipeline.
There is less manpower used in blowing cable laying operations.
It is convenient to replace the new type of optical fiber in the future, keep leading in technology and constantly adapt to market needs.
在线联系供应商
Other supplier products
 |
Fiber Optic Cable | Types of Fiber Optic Cable Fiber optics is used for long-distance and high-performance data networking. It is also commonly used in telecommunicati... |
 |
ADSS Fiber Optic Cable | Introduction of ADSS Fiber Optical Cable ADSS cable, All-dielectric Self-supporting Optical Cable (also known as All-dielectric self-supporting fib... |
 |
Indoor Tight-buffered Fiber Optic Cable GJFJV 12 Colors 0.9mm G.657A1 Corning LSZH|PVC | Tight-buffered 0.9mm gjfjv optical fiber cableis consist of a colored bare fiber and extruded with PVC or LSZH sheath around the bare fiber with va... |
 |
Introduction of ADSS Fiber Optic Cable | ADSS ofc cableis also known as All-dielectric self-supporting fiber optic cable. Alldielectric fiber optic cableis made of all-dielectric materials... |
 |
FTTH Drop Cable Pre-terminated Fiber Optic Patch Cord Duplex LC/UPC-LC/UPC LSZH 5m Black | The FTTH drop cable pre terminated fiber patch panel is to terminate fiber connectors at both ends of the ready-made drop cable, which can have var... |
Same products
 |
iFixes Solder Paste 138℃ 158℃ 183℃ 217℃ PCB BGA Chip Flux | 卖方: 深圳市维客修科技有限公司 | Description iFixes solder paste is138 is158 is183 is217 conductive silver paste for mobile phone... |
 |
DWDM Add and Drop Mux Demux | 卖方: Guangzhou Sintai Communication Co.,LTD | What Is OADM? The DWDMmultiplexercard launched by Sintai Communication Co., Ltd is generally use... |
 |
DCM | 卖方: Guangzhou Sintai Communication Co.,LTD | What Is Dispersion Compensation Fiber Dispersion Compensation Module (DCM) is designed to fix th... |
 |
Aggregation & Distribution System | 卖方: Guangzhou Sintai Communication Co.,LTD | Aggregation & Distribution System Sintai Aggregation & Distribution System offers 32*100... |
 |
CWDM Mux Demux | 卖方: Guangzhou Sintai Communication Co.,LTD | 4CH CWDM Mux Demux 01- 4CH CWDM DWDMMux Demux CWDM Coarse Wave Division Multiplexing (CWDM) Mul... |
