Air Blowing Micro fiber Optic Cable
Product Introduction
Air Blowing cable technology is a new way to make significant improvements in traditional fiber optic systems, facilitating the rapid adoption of fiber optic networks and providing users with a flexible, secure, cost-effective cabling system.
The blowing system consists of micro-tubes (single micro-tubes and micro-tubes), micro-cables, fittings and air blowing equipment.
Air Blowing cable technology development
In 1982, BT invented the Air blown cable technology.
In 1987, the British company Berry invented the single Air blown fiber technology.
In 1988, the world's first installation of indoor blown fiber was achieved.
In 1993, the entire system was developed and officially named as a Air blown fiber system and commercialized.
In 1997, the Netherlands air blown 10pcs of ø10mm micro tubes in a ø63/50 mm mother tube. NKF Telecom, a subsidiary of the DRAKA Group, used the air blowing technology and equipment of the Swiss company Politi to realize the commercial use of the network air blowing technology for the first time. This technology covers long-haul trunk lines, metropolitan area networks and fiber-to-the-home in Europe and the United States.
In 1995, former China Ministry of Posts and Telecommunications company cooperated with Swiss company Politi and the United States Dulan Company, for the fist time introduced the world's advanced air blowing cable technology and equipment to China.
The Air Blown Application
Theair blowing micro fiber optical cableis composed of a combination of micro tubes (bundles), optical fibers (bundles), and blowing fiber devices.The air compressor is used as the power source for the traction fiber bundle, and the fiber bundle is quickly sent to the same micro tube bundle in the micro tube, and different types of fibers (beams) can be mixed and blown in different micro tubes.
To achieve fast installation and improved installation quality, all air-blown fiber cable are equipped with international standard prefabricated connectors on one end.
Air Blowing Fiber Optical Cable Machine
The Laying methods of Air Blowing cable compare with other Fiber Optical cable, the tension of the Air Blowing Cable during the laying process is relatively uniform and much smaller.
The Air Blowing cable laying process is simplified and fast.
The Air Blowing cable can lay a long distance in one time. It will reduce the number of joints and reduce the attenuation.
The Air blown cable can greatly reduce the number of manholes and hand holes on the pipeline.
There is less manpower used in blowing cable laying operations.
It is convenient to replace the new type of optical fiber in the future, keep leading in technology and constantly adapt to market needs.
Send product request
Other supplier products
 |
1U 48 cores Fiber Optic Patch Panel LC, SC, FC, ST MPO Cassette Patch Panel | Description This Fiber Optical patch panel is a 19-inch standard type. This Patch panel can be equipped with MPO module box and splicing fiber met... |
 |
MTP MPO-LC Fiber Optic Jumper Method A Pigtail Trunk 12 to 144 Cores 3mm Single-mode G652D G657A2 | Manufacturing MTP MPO fiber opticjumpers which are available in 12 to 144 core fiber connections. MTP/MPO jumers are miniaturized with 12 or 24 pi... |
 |
6 Channel CWDM Mux Demux 1270-1610nm Fiber Optic Communication Equipment | CWDM Mux / Demux (Coarse Wavelength Division Multiplexing) is a low-cost WDM transmission technology for the metropolitan area network access layer... |
 |
12-24 fibers Outdoor FTTH Drop Cable Steel Wire&FRP | Description: It is a central tube of FTTH outdoor drop cable(GJYXFCH) also called self-supporting butterfly drop optical cable. Compared with commo... |
 |
Fiber Optic Patch Cord | What is Fiber Optic Patch cord Fiber patch cords / pigtails are one of the most widely used basic components in optical communications. A fiber cab... |
Same products
 |
ROD CORE INDUCTOR | Seller: Yu Yang Magnetic Co., LTD | High saturation current. General purpose inductors Low cost design Tin plated leads. Varnish ... |
 |
KYN28-12 Metal-clad indoor movable switchgear | Seller: Jiangsu Aokai Electric Co., Ltd | KYN28-12 indoor communication metal armoured open switchgear(hereinatter referred to as the switc... |
 |
MTUB43-90511B-12A20 Mini USB Female Connector | Seller: MTCONN ELECTRONICS CO.,LTD | This model is a Mini USB R/A T/H DIP female connectorthat complied with RoHS certificate. It adop... |
 |
Radar RD03 | Seller: Xi'an Interwiser Electronic Technology Co., Ltd | The RD03 low-altitude surveillance radaris a Ku-band phased array radar that adopts an all-solid-... |
 |
IWRFSOC8X8 Xilinx RFSoC 3U 4-Channel/ DC-4GHz | Seller: Xi'an Interwiser Electronic Technology Co., Ltd | InterWiser IWRFSOC8x8 3U algorithm evaluation modular systemdesigned for integration into deploye... |
