Thermal Night Vision
The thermal imaging night vision car systemis mainly used in the dark environment without visible light or low light. The infrared emitting device actively projects the infrared light onto the object, and the infrared light is reflected by the object and enters the lens for imaging. The image is formed by the reflection of infrared light instead of visible light. At this time, you can see the picture that is invisible to the naked eye in the dark environment. Below are two types of our featured night vision infrared car camera.
Infrared Night Vision Cameras
Thermal Imaging Sight
Night vision devices can be divided into two types: the increased image tube night vision device (traditional night vision device) and the infrared thermal imaging night vision for car drivingdevice.What is the incr...
Thermal Imaging Binocular
Objects in nature, in addition to the visible light image we are familiar with, also have an infrared thermal radiation image, but infrared rays are not visible to the naked eye because it is invisibl...
Working Principle of Infrared Night Vision Camera
The infrared night vision technology mainly uses the photoelectric conversion of the infrared light source to perform image processing technology. It is divided into active and passive. Active imaging, the target is illuminated with an infrared searchlight, and the reflected infrared radiation is received to form an image. Passive does not emit infrared light, and relies on the target's own infrared radiation to form a "thermal image", so it is also called "thermal imager". Compared with the imaging of the two technologies, the active imaging is clear and can identify people, targets, scenes, and so on.
Key Components of Thermal Machine Vision Camera
After being energized, the current is transmitted through the PCB circuit board to an infrared wick that converts electrical energy into light energy and thermal energy, and the infrared light device emits infrared light and is projected onto the object.
The lens collects the infrared light reflected by the infrared lamp after being projected onto the object, and is imaged by focusing processing and then transmitted to the photosensitive element (CCD/CMOS) of the camera board.
The photosensitive component (CCD/CMOS) converts the received infrared light image from light to current signal and transmits it to each working IC electronic component through the PCB circuit board for processing, and finally converts it into a video signal output through the micro processing chip (DSP).
The above components are fixed, and the components are protected to achieve dustproof, waterproof, and anti-shock effects, and at the same time, the entire product is more beautiful.
Importance of Auto Night Vision Systems
The night vision car camera systemwill be a safety system with higher value after the airbag and anti-lock braking system.
The car is equipped with a vehicle mounted night visionsystem that extends the driver's field of vision beyond the range of headlights. Therefore, before using the night vision system, the headlights or brake lights must be turned on, otherwise it will not work. It is also worth noting that the car night vision system is not a substitute for visual information obtained through the windshield through the eyes. It only provides you with auxiliary information when it is dark.
ULIRVISIONhas more than a research team of more than 100 researchers in optical design, electronic technology, image algorithms, information processing, precision machinery, system integration, remote control, etc.
在线联系供应商
Other supplier products
 |
Thermal Surveillance Systems | Thermal security camera system is widely used in areas where security and monitoring are required for timely detection of abnomal situations in ord... |
 |
Online Temperature Measurement Thermal Imager | According to different forms of use, pan tilt surveillance cameracan be divided into online thermal imaging cameras and portable thermal imaging ca... |
 |
TC300PTZ/TC700PTZ Dual-Spectral Security Monitor System | Overview of Security Monitor Camera TC300PTZ/TC700PTZ TC300PTZ|TC700PTZ combine thermal and visible-light imaging together. This thermal cctv camer... |
 |
TI320+ SF6 Gas Thermal Imaging Camera | Overview of TI320+ Gas Thermal Imaging Camera ULIRVISION TI320+ is equipped with a cooled and smart gas leak detector, which can detect gas leaks ... |
 |
Thermal Night Vision | Terminology Concept The vehicle vision systemis mainly used in the dark environment without visible light or low light. The infrared emitting devi... |
Same products
 |
iFixes Solder Paste 138℃ 158℃ 183℃ 217℃ PCB BGA Chip Flux | 卖方: 深圳市维客修科技有限公司 | Description iFixes solder paste is138 is158 is183 is217 conductive silver paste for mobile phone... |
 |
DWDM Add and Drop Mux Demux | 卖方: Guangzhou Sintai Communication Co.,LTD | What Is OADM? The DWDMmultiplexercard launched by Sintai Communication Co., Ltd is generally use... |
 |
DCM | 卖方: Guangzhou Sintai Communication Co.,LTD | What Is Dispersion Compensation Fiber Dispersion Compensation Module (DCM) is designed to fix th... |
 |
Aggregation & Distribution System | 卖方: Guangzhou Sintai Communication Co.,LTD | Aggregation & Distribution System Sintai Aggregation & Distribution System offers 32*100... |
 |
CWDM Mux Demux | 卖方: Guangzhou Sintai Communication Co.,LTD | 4CH CWDM Mux Demux 01- 4CH CWDM DWDMMux Demux CWDM Coarse Wave Division Multiplexing (CWDM) Mul... |
