Sheet Metal Packing

Sheet metal packing gets greater surface area per cubic foot than random packing of equal capacity. A series of perforated vertical corrugated layers make up each packing element. Gas/liquid is spread and distributed radially from layer to layer within the element. Surface texturing on the sheet metal further enhances wettability and mass transfer. Installed in opposing 90°-rotated sections, these elements promote thorough mixing and even gas/liquid distribution across the radius of the tower. Wiper bands throughout the packing prevent fluid from migrating between the packing and vessel wall.

Specification

Material: SS 304, SS 304L, SS 316, SS 316L, etc.
Specific surface areas: 125 m2/m3, 175 m2/m3, 200 m2/m3, 250 m2/m3, 300 m2/m3, 350 m2/m3, 500 m2/m3.
Features

Its high mass transfer surface area is suitable for close boiling components distillation due to shorter columns.
Its structured arrangement ensures no channeling of liquid and requires minimum liquid redistribution.
Due to its very low pressure drop, it is recommended for vacuum distillation systems.
It has higher vapour load capacity as compared to random packing and trays.
It provides low liquid hold-up.
Application

Refinery columns (atmospheric and under vacuum).
Petrochemical columns.
Natural gas glycol dehydration.
Wastewater treatment stripping columns.
Atmospheric pressure and high pressure columns.



在线询价

至: Boegger Industrial Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Expanded Metal Prick Corrugated Plate Packing
Expanded Metal Prick Corrugated Plate Packing Expanded metal prick corrugated packing is perforated very small holes, and then is pushed to corrugated sheet; finally it is assembled to coil. It...
Sheet Metal Packing
Sheet Metal Packing Sheet metal packing gets greater surface area per cubic foot than random packing of equal capacity. A series of perforated vertical corrugated laye...
Metal Structured Packing
Metal Structured Packing Specification Material: Stainless Steel 304, 304L, 316, 316L, 410, Carbon Steel. Type: 125X/Y, 250X/Y, 350X/Y, 500X/Y, 700X/Y. The metal packing i...
Metal Wire Gauze Structured Packing
Metal Wire Gauze Structured Packing Metal wire gauze structured packing is an important milestone of the development of clear and neat filling. This kind of filling consists of arrang...
Grid Structured Packing
Grid Structured Packing Grid structured packing combines high surface area of traditional structured packing and rugged construction of the common grid configuration. It c...
供应产品

Same products

气压烧结炉
气压烧结炉 卖方: 湖南顶立科技有限公司 该气压烧结炉主要用于碳化硅、氮化硅等陶瓷制品的真空烧结和压力烧结。
立式真空石墨化炉
立式真空石墨化炉 卖方: 湖南顶立科技有限公司 该立式真空石墨化炉主要用于C/C、石墨、碳纤维保温耐火材料等碳制品的高温石墨化处理。
SHX系列循环流化床蒸汽锅炉
SHX系列循环流化床蒸汽锅炉 卖方: 无锡中正锅炉有限公司
DZL系列燃煤蒸汽锅炉
DZL系列燃煤蒸汽锅炉 卖方: 无锡中正锅炉有限公司
DHL燃煤蒸汽锅炉
DHL燃煤蒸汽锅炉 卖方: 无锡中正锅炉有限公司