Sheet Metal Packing

Sheet metal packing gets greater surface area per cubic foot than random packing of equal capacity. A series of perforated vertical corrugated layers make up each packing element. Gas/liquid is spread and distributed radially from layer to layer within the element. Surface texturing on the sheet metal further enhances wettability and mass transfer. Installed in opposing 90°-rotated sections, these elements promote thorough mixing and even gas/liquid distribution across the radius of the tower. Wiper bands throughout the packing prevent fluid from migrating between the packing and vessel wall.

Specification

Material: SS 304, SS 304L, SS 316, SS 316L, etc.
Specific surface areas: 125 m2/m3, 175 m2/m3, 200 m2/m3, 250 m2/m3, 300 m2/m3, 350 m2/m3, 500 m2/m3.
Features

Its high mass transfer surface area is suitable for close boiling components distillation due to shorter columns.
Its structured arrangement ensures no channeling of liquid and requires minimum liquid redistribution.
Due to its very low pressure drop, it is recommended for vacuum distillation systems.
It has higher vapour load capacity as compared to random packing and trays.
It provides low liquid hold-up.
Application

Refinery columns (atmospheric and under vacuum).
Petrochemical columns.
Natural gas glycol dehydration.
Wastewater treatment stripping columns.
Atmospheric pressure and high pressure columns.




Send product request

To: Boegger Industrial Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Grid Structured Packing
Grid Structured Packing Grid structured packing combines high surface area of traditional structured packing and rugged construction of the common grid configuration. It c...
Metal Wire Gauze Structured Packing
Metal Wire Gauze Structured Packing Metal wire gauze structured packing is an important milestone of the development of clear and neat filling. This kind of filling consists of arrang...
Expanded Metal Prick Corrugated Plate Packing
Expanded Metal Prick Corrugated Plate Packing Expanded metal prick corrugated packing is perforated very small holes, and then is pushed to corrugated sheet; finally it is assembled to coil. It...
Metal Plate-net Corrugated Packing
Metal Plate-net Corrugated Packing Metal plate-net corrugated packing is punched lot of diamond-shaped tiny holes at metal thin slab. Then drawn the plate to appointed specification....
Knitted Structured Packing
Knitted Structured Packing Knitted structured packing is suited for applications that demand high separation efficiency with a lower pressure drop. The packing is made from ...
All supplier products

Same products

Cable Protectors
Cable Protectors Seller: DiBo Petroleum Machinery Co., Ltd Cable Protectors (Casting) Control line and ESP cable protectors (Clamps) are used to prote...
Sucker Rod Centralizer
Sucker Rod Centralizer Seller: DiBo Petroleum Machinery Co., Ltd Sucker Rod Centralizer Usage The sucker rod centralizer is the eccentic wear prevention downhol...
Spiral Stamped Centralizer
Spiral Stamped Centralizer Seller: DiBo Petroleum Machinery Co., Ltd Spiral Stamped Centralizer Spiral stamped centralizer enables optimal mud displacement for verti...
Integral Centralizer
Integral Centralizer Seller: DiBo Petroleum Machinery Co., Ltd Integral Centralizer This One-Piece Centralizer has ultra-high strength without any weak point. ...
Aluminum-Alloy Centralizer
Aluminum-Alloy Centralizer Seller: DiBo Petroleum Machinery Co., Ltd Aluminum-Alloy Centralizer Aluminum Alloy Centralizer centralizers are made of high-strengt...