EPS Sandwich Panel Production Line
Main structure features ofEPS Sandwich Panel Machine
1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and high efficiency.
2) The EPS sandwich panel production lineis welded by H-beam with shot blasting treatment on the surface, so the whole structure is simple and stable.
3) Consecutive laminating body transmission adopts worm and worm gear in order to control the producing speed steadily. The consecutive laminating body can cut to length with the advanced frequency control.
4) Three groups heating system to adapt the environmental temperature in different places.
5) Glue Providing system is driven individually. The horizontal compound, glue evenly, without any pollution.
6) Consecutive laminating body is long to guarantee the flatness of the sandwich panel.
7) The moving stroke of the cutting system is long to extend the life of the cutting tool.
Contact us forEPS sandwich panel machine price! Or contact us for more information about othersandwich panel production machinery/line.
Main Technical Parameter of EPS Sandwich Panel Production Line
Specification ofSandwich panel produced by Jinggong sandwich panel making machine:
Length: Min cutting length is 2 m
Max cutting length is 15m
Width: (see profile drawing)
Thickness: (see profile drawing)
Raw material specification:
coil thickness: 0.4～0.6 mm (steel be flat without ups and downs, deformation and bending)
sheet yield stress: ≤235MPa
coil max width: 1200 mm (tolerance±2mm)
coil max weight: 4T
coil ID: Φ500 and Φ600 mm
coil OD: Φ1000 mm
EPS material: density is≥18㎏/m3, unstraight of each side ≤1㎜/m, curve ≤3㎜/m, surface be even, unevenness smaller than 1.5mm/m, EPS material single piece length more than 3m.
Material suitable shape: see profile drawing
Material suitable width: minimum shall be 1/2mm of the finished panel width.
EPS panel production linespecification:
Work line speed: 1000-3000mm/min (frequency speed adjustment).Attention: depending on glue brand, temperature and proficiency of operators.
Machine length: about 40 m
Working height: 1050 mm（panel output height）
Laminating effective length: 7.5m
Control way: adopt industrial computer PLC
Total power: about 35 kw
Power: 380V/3phase/50 Hz
control voltage: 24 V/110 V/220 V
pneumatic: 0.7 Mpa (self-prepared by the factory)
best working temperature: around 25℃
Main Structure Components OfEPS Sandwich Panel Production Line
This EPS sandwich panel line consists of one roll forming machine and one laminating machine. It adopts international roll forming technology, laminating transmission technology, air-actuated and electric & hydraulic control technology. The whole EPS panel production line only needs 6 or 7 workers.
The whole sandwich panel machine line consists of two parts: roll forming part and laminator part.
1) Roll forming part
The roll forming machine consists of a hydraulic uncoiler, guiding system, filming system, flat sheet slitting system, roll forming system, panel support frame, assistant forming machine and so on.
2) Laminating body
This part consists of a guiding device, laminating body, cutting system, glue feeding system, support device and electric control system, etc.
Zhejiang Jinggong Science & Technology Co., Ltd is a professional roll forming machine company. We provideSandwich Panel Machine, Roll Forming Machine, eps panel machineand so on. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
PU/PIR Continuous Sandwich Panel Production Line | Continuous PU/PIR Sandwich Panel Production Line, also called polyurethane sandwich panel manufacturing line/production line/machine, is an automat... |
|
|
EPS Sandwich Panel Production Line | Main structure features ofEPS Sandwich Panel Machine 1) This EPS sandwich panel making machinehas the specification: nice appearance, low noise and... |
 |
Pipe Bending Machine | The CNCChina pipe bending machineis used to make a circle, curve, or spiral for workpieces. It is widely used in such fields as the petroleum indus... |
 |
Pipe Bending Machine | The CNC Pipe Bending Machine is used to make a circle, curve, or spiral for workpieces. It is widely used in such fields as the petroleum industry,... |
 |
Steel Deck Roll Forming Machine | The sheet produced by this deck roll forming machinehas high strength with big wavelength, and adheres well to concrete. Used on tall buildings, it... |
Same products
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 硝子 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ●... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 异形砖 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 异形组装 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 铺面砖 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ... |
 |
fused AZS block | 卖方: 内蒙古亿升新材料有限公司 | 盖板砖 AZS-33系列产品抗玻璃液侵蚀能力强，发泡和结石倾向低。广泛应用于与玻璃液接触部位，如熔化池池壁、铺底和上部结构，如熔化池胸墙、小炉、挂钩砖等。 典型应用 ●池壁 ●上部结构 ... |
