.

Cast Iron Fitter Workbench

Material: HT200-300

Standard: GB/T22095-2008

Specification: 750x1000-3000x8000mm or customize (special size is acceptable following customers’ requirement)

Surface: flat, V, T, straight-shaped slots and tapped holes, long holes, grid lines, etc

Hardness of the working surface: HB160-240

Surface treatment: hand-scraped or finish-milling

Foundry process: sand casting or centrifugal casting

Molding type: resin sand molding

Painting: primer and face painting

Surface coating: pickling oil and plastic-lined or covered with anticorrosion paint

Precision grade: 2-3

Working temperature: (20±5)℃

Packaging: plywood box



在线联系供应商

至: Botou Jianxin Casting Tools Co.,Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Riveting and Welding Cast Iron Surface Plate
Riveting and Welding Cast Iron Surface Plate Material: HT200-300 Standard: GB/T22095-2008 Specification: 750x1000-3000x8000mm or customize Surface: smooth holes or T-slots (any other accessor...
Site of Surface Plate for CMM
Site of Surface Plate for CMM Material: HT200-300 or granite Standard: GB/T22095-2008 Specification: 750x1000-3000x8000mm or customize Surface: T-slot Hardness of the working...
Floor Type Boring and Milling Machine Workbench
Floor Type Boring and Milling Machine Workbench Material: HT200-300 Standard: GB/T22095-2008 Specification: 750x1000-3000x8000mm or customize Surface: T-slot Hardness of the working surface: ...
Cast Iron Floor Plate
Cast Iron Floor Plate Material: HT200-300 Standard: GB/T22095-2008 Specification: 750x1000-3000x8000mm or customize (special size is acceptable following customers&rsqu...
Round Cast Iron Surface Plate
Round Cast Iron Surface Plate Material: HT200-300 Standard: GB/T22095-2008 Specification: Φ300--Φ5000mm or customize Surface: flat, V, T, straight-shaped slots and tapp...
供应产品

Same products

Industrial Stainless Steel Gauge
Industrial Stainless Steel Gauge 卖方: 宁波虎奔工具有限公司 Industrial Stainless Steel Gaugeis ideally suited for uses on equipment where excessive vibration...
Valve Tappet Eddy Current Flaw Detector QMTZET-04
Valve Tappet Eddy Current Flaw Detector QMTZET-04 卖方: Nanjing BKN Automation System Co.,LTD Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that ...
QTXET-01 Ball Studs Eddy Current Sorting Machine
QTXET-01 Ball Studs Eddy Current Sorting Machine 卖方: Nanjing BKN Automation System Co.,LTD There are two main types of ball studs: one is a combination of a spherical pin and an integral b...
GSET-551 Steel Wire Eddy Current Flaw Detector
GSET-551 Steel Wire Eddy Current Flaw Detector 卖方: Nanjing BKN Automation System Co.,LTD GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction   Using the eddy current signal...
Eddy Current Testing Equipment for Tube, Bar and Wire
Eddy Current Testing Equipment for Tube, Bar and Wire 卖方: Nanjing BKN Automation System Co.,LTD ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic f...