Continuous Emission Monitoring System
Zetian technology is the only high and new technology company with a full set of intellectual property rights of flue gas monitoring. Its independent research and development products include ultraviolet glue gas analyzer, dust monitor, temperature pressure flow, humidity meter, HCl analyzer, HF analyzer, pretreatment system, monitoring software, etc.
Continous emissions monitoring system(CEMS) of Zetian Technology can monitor gases, including So2, NOx, O2, dust, humidity, temperature, pressure, flow parameters, etc. It can be widely used in all kinds of component continuous monitoring situation such as boilers, industrial furnaces, incinerator emissions, etc.
In addition, it also can monitor gases for a particular occasion such as HCl, HF, CO, CO2, NH3, H2S, Cl, VOC, etc…
It has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control and data acquisition and processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for specific occasions. After dedusting by sampling probe, tracing by heating pipe, dehydration and cooling by two-step condensing, the measured gas is analyzed by the heated gas analysis module (TDLAS and DOAS technique).It is an effective solution to solve the technical problem that large humidity variation of the waste incineration and other occasions lead to measuring data fluctuation.
This online continuous stack emission monitoring systemadopts difference optical absorption spectroscopy (DOAS) analysis technology to measure SO2 and NOx; electrochemical to measure O2. And temperature, pressure, flow rate are respectively measured by pressure sensors and pitot micro differential pressure method. Laser scattering method is adopted to monitor dust and high temperature capacitance for humidity. Besides of SO2 and NOx, DOAS technology can also analyzer gases NH3, Cl2, H2S, O3 and etc. If system is extended with other analysis modules, it can also analyze and measure HF, HCl, CO, CO2 and so on at the same time.
Features of Continuous Emission Monitoring System:
The measure lower limit of ultraviolet flue gas analyzer is as low as 1 mg/m3, and fully qualified for technical parameters in ultra-low emission monitoring measurement occasions;
The latest laser forward scattering dust monitor is suitable for high humidity flue gas, light-leaking stack and low dust emission and other application points;
Integration of low flow velocity of temperature pressure flow product solves the problem that normal product has inaccuracy measurement under low flow velocity of flue gas;
Laser HCl analyzer, HF analyzer have passed national explosion-proof certification, and have the wide recognition in the industry;
The company uses UV difference gas absorption spectrum analysis technology which is fully independent intellectual property rights, effectively avoiding interference of dust and moisture on measurement;
By combining multistage dust filtration technology and regular blowing back, it effectively prevents dust blocking filters and the pipeline, as well as polluting analyzer measurement pool. It can adapt to worst environment of the high dust, high humidity, high temperature, high corrosion resistance, etc. ;
Ultraviolet flue gas analyzer can simultaneously measure the parameters of SO2, NO, NO2 (Being independent from NO), O2, humidity, Nox can be obtained by direct measuring of NO and NO2 , without the converter of NO2 to NO;
Simple structure, without optical moving parts, long period free from maintenance, high resistance to vibration;
Advanced UV difference spectrum technology, spectrum holographic grating spectrometer, diode array detection, to obtain a complete continuous absorption spectrum, long takanami resolution to ensure low detection limit, small temperature drift, fast response time;
Analyzer gas chamber is processed with the features of strong gas chamber, low cost and low impact by water and dust. The detector and the gas chamber adopts optical fiber for connection. It is easy to replace and maintenance cost is low;
Completely independent research and development of the core module and algorithm, the system has strong market competitiveness;
The system structure is compact with high integration, easy to transport and install.
Zetian is one of the most professional continuous emission monitoring system suppliersin China. Hangzhou Zetian Technology is committed to the integrity, strength and quality of our air quality monitor. We're internationally recognized. Welcome you to visit us.
在线联系供应商
Other supplier products
 |
EM-5Hg Stack Mercury Continuous Monitoring System | Overview of Mercury Stack Monitoring Based on cold vapor atomic fluorescence spectrophotometer technology, we have developed EM-5Hg stack mercury c... |
 |
AM-5100 SO2 Analyzer | Overview Of Portable SO2 Analyzer AM-5100 is a portable SO2 analyzeradopts ultraviolet fluorescence technique and combines advanced micro processin... |
 |
ERMS-2000-M Mobile Vehicle Exhaust Telemetry System | Overview The ERMS2000-M movable vehicle exhaust remote sensing system, developed by our company, is suitable for mobile enforcement of city roads a... |
 |
EM-5P Portable Flue Gas Analyzer | Overview Of EM-5P Portable Flue Gas Analyzer EM-5P portable flue gas analyzersystem mainly consists of gas monitoring sensors (SO2, NOx, CO, CO2), ... |
 |
EQMS-3000B Environmental Quality Monitoring System | Overview According to the status and characteristics of construction sites and production industry generated pollution, applying more sophisticated... |
Same products
 |
iX361 中框校正夹 | 卖方: 深圳维客修有限公司 | Fixes iCF6/iA3/iX16/iX361手机屏幕中框维修治具。iFixes iCF6免加热开屏器用于手机液晶拆解无需加热。iFixes iX361中框矫正维修平台。iFixes IA3... |
 |
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
|
|
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
|
|
单相电表测试仪 | 卖方: 782364 | GF112D是一种单相手持式电子电表测试装置，精度等级为0.05、0.1或0.2，用于现场测试单相电表误差。测量范围从1mA到120A, 0到600V，也可用于测试交流参数—&mda... |
 |
数字轨距 | 卖方: Wuhan linkage track equipment co.,ltd | 产品描述 数显轨头磨损仪主要用于测量钢轨的垂直磨损和横向磨损，设计合理，重量轻，操作方便，读数直观。 特征 1.数字直读式：LCD显示屏，清晰易读;无需计算，直接读数;读数时，按住... |
