.

Bolt Vortex Sorter BKNFX-11

Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external thread) is required to be fitted with a nut for fastening the two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is a detachable connection.

 

BKNFX-11 bolt eddy current sorter is suitable for high-strength bolt heat treatment state, crack, wrong thread anchor, and mixture sorting.

 

The shape of bolt:

 

 

Generally, the countersunk head is used where the surface is smooth and does not protrude after the connection is required because the countersunk head can be screwed into the part. The round head can also be screwed into the part. The tightening force of the square head can be larger, but the size is large. In addition, in order to meet the needs of locking after installation, there are holes in the head and holes in the rods, which can not loosen the bolt when it is vibrated. Some bolts without threads are to be thin, called thin waist bolts. This type of bolt facilitates the coupling of the force. There are special high-strength bolts on the steel structure, the head will be larger and the size will change.

 

In addition, there are special uses: T-slot bolts, the most used on machine tool fixtures, special shape, cut off both sides of the head. Anchor bolts for machine and floor attachments are available in a wide variety of shapes. U-bolts, as mentioned above. and many more. There is also a special stud for welding. One end has a thread and one end is not welded. It can be welded to the part and the other side can be directly screwed.

 

Bolt Vortex Automatic Screw Sorter BKNFX-11 Brief Introduction

 

 

 

 

 

 

 

 

 

Sorting accuracy

 

 

 

 

 

Why BKN NDT Testing Equipment

 

The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech ndt equipment manufacturers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.


在线联系供应商

至: Nanjing BKN Automation System Co.,LTD
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

EDM Notch
EDM Notch Nanjing BKN Automation System Co., Ltd., originated from the eddy current testing laboratory of the Nanjing University of Technology. It is an eddy...
Application of Ndt Inspection Equipment
Application of Ndt Inspection Equipment Ndt inspection equipmentis widely used in industry, such as nuclear industry, weapon manufacturing, machinery industry, shipbuilding, petrochemical...
Valve Tappet Eddy Current Flaw Detector QMTZET-04
Valve Tappet Eddy Current Flaw Detector QMTZET-04 Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The w...
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator
BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ...
Wireless Transmission Steel Bar Ultrasonic Flaw Detector
Wireless Transmission Steel Bar Ultrasonic Flaw Detector Steel bar is a conventional product with high density, moderate noise. The system is suitable for the automatic detection of internal and external ...
供应产品

Same products

Special measuring instrument for rebar profile GDC-L360-JX
Special measuring instrument for rebar profile GDC-L360-JX 卖方: Diameter measurement system, Surface inspection system, Rebar measurement system The special measuring instrument for rebar profileis used to precisely measure the shape and dime...
Diameter measuring equipment
Diameter measuring equipment 卖方: Diameter measurement system, Surface inspection system, Rebar measurement system Diameter measuring equipment Diameter measuring equipment is used to accurately determine the di...
Hot rolled bar outer diameter measuring instrument GDC-J2400-JX
Hot rolled bar outer diameter measuring instrument GDC-J2400-JX 卖方: Diameter measurement system, Surface inspection system, Rebar measurement system Purpose:Real-time online inspection of geometric dimensions of high-speed wire rods, square steel...
UV Detector
UV Detector 卖方: 淮安市鑫盛制药设备有限公司 The ultraviolet-visible dual-wavelength detector features high sensitivity and a wide linear rang...
Fabric ici pilling and snagging box
Fabric ici pilling and snagging box 卖方: 标准集团 Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the...