Bolt Vortex Sorter BKNFX-11
Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external thread) is required to be fitted with a nut for fastening the two parts with through holes. This type of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is a detachable connection.
BKNFX-11 bolt eddy current sorter is suitable for high-strength bolt heat treatment state, crack, wrong thread anchor, and mixture sorting.
The shape of bolt:
Generally, the countersunk head is used where the surface is smooth and does not protrude after the connection is required because the countersunk head can be screwed into the part. The round head can also be screwed into the part. The tightening force of the square head can be larger, but the size is large. In addition, in order to meet the needs of locking after installation, there are holes in the head and holes in the rods, which can not loosen the bolt when it is vibrated. Some bolts without threads are to be thin, called thin waist bolts. This type of bolt facilitates the coupling of the force. There are special high-strength bolts on the steel structure, the head will be larger and the size will change.
In addition, there are special uses: T-slot bolts, the most used on machine tool fixtures, special shape, cut off both sides of the head. Anchor bolts for machine and floor attachments are available in a wide variety of shapes. U-bolts, as mentioned above. and many more. There is also a special stud for welding. One end has a thread and one end is not welded. It can be welded to the part and the other side can be directly screwed.
Bolt Vortex Automatic Screw Sorter BKNFX-11 Brief Introduction
Sorting accuracy
Why BKN NDT Testing Equipment
The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech ndt equipment manufacturers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.
Send product request
Other supplier products
 |
Eddy Current Testing Equipment | ECT Eddy current testingis a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals t... |
 |
Drill Pipe Magnetic Flux Leakage Detector MFL-308 | Specifications: diameter Φ73 / Φ89 mm, length 9.6m or so Detection speed: 6-20 m / min Acceptance criteria: American Petroleum Instit... |
 |
BKNET-0102 Welded Pipe Eddy Current Flaw Detector | Eddy current testing of welds is the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossle... |
 |
Portable Magnetic Flux Leakage Testing Equipment | Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects... |
 |
GSET-551 Steel Wire Eddy Current Flaw Detector | GSET-551 Steel Wire Eddy Current Flaw Detector Brief Using the eddy current signal processing method and high-performance DSP algorithm, the NDTwi... |
Same products
 |
iX361 middle frame correction clamp | Seller: Shenzhen weikexiu technology Co.,Ltd | Fixes iCF6/iA3/iX16/iX361 mobile phone screen middle frame repair jig. iFixes iCF6 non-heating sc... |
 |
SINGLE PHASE ELECTRICITY METER TESTER | Seller: 782364 | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, u... |
|
|
SINGLE PHASE ELECTRICITY METER TESTER | Seller: 782364 | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, u... |
|
|
SINGLE PHASE ELECTRICITY METER TESTER | Seller: 782364 | GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.05, 0.1or 0.2, u... |
 |
Digital Track Gauge | Seller: Wuhan linkage track equipment co.,ltd | 产品描述 数字轨头耐磨计主要用于测量钢轨的垂直磨损和横向磨损。合理的设计使其轻巧，操作方便，阅读直观。 特征 1、直读数字型：液晶显示屏，清晰可读;无需计算，可直接读取;读数时，按... |
