PTFE Ring
PTFE RingPTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions. None of these rubber seals can be achieved.
PTFE seal has simple structure, shape and size can be interchangeable with rubber seal, easy installation and maintenance.
The Technical Indexes of PTFE Seal Ring, PTFE Wear Ring
|
Type |
Size |
|
DN15 |
22*51*3 |
|
DN20 |
27*61*3 |
|
DN25 |
34*71*3 |
|
DN32 |
43*82*3 |
|
DN40 |
49*92*3 |
|
DN50 |
61*107*3 |
|
DN65 |
77*127*3 |
|
DN80 |
89*142*3 |
|
DN100 |
115*162*3 |
|
DN125 |
141*192*3 |
|
DN150 |
169*218*3 |
|
DN200 |
220*273*3 |
|
DN250 |
273*329*3 |
|
DN300 |
325*384*3 |
|
DN350 |
377*444*3 |
|
DN400 |
426*495*3 |
|
DN450 |
480*555*3 |
|
DN500 |
530*617*3 |
|
DN600 |
630*734*3 |
|
DN700 |
720*804*3 |
|
DN800 |
820*911*3 |
|
DN900 |
920*1011*3 |
|
DN1000 |
1020*1128*3 |
Specification of Bronze Filled PTFEWear Ring
|
Item |
Data |
Unit |
|
Density |
g/cm³ |
|
|
Tensile strength |
25-45 |
Mpa |
|
Elongation at break |
200-350 |
% |
|
Compression strength |
24 |
Mpa |
|
Shore D hardness |
50-60 |
|
|
Friction coefficient |
Normally, PTFE ring and PTFE gasket can be together called PTFE sealing product, usually, the difference is the thickness above 5mm, it can be called PTFE gasket, below 5mm, it can be called PTFE ring. The special size can be customized according customer requirement.
Features of PTFE Ring
Temperature resistance: It is able to work stably between -180°C to +260°C.
Excellent chemical corrosion resistance: Applicable medium includes oil, acid solution and almost all chemical materials.
Excellent non-sticky property: With low friction coefficient it easier to remove those resin, dopes, oil and other sticky things.
Anti-aging, weathering resistance.
Excellent insulation property.
Filled material: Filled PTFE products has more outstanding performance by adding filler such as carbon, graphite, bronze, glass fiber, carbon fiber, MOS2, PEEK, PI, POB BaSO₄, SiO₂, glass bead, polyamide.
As one of ptfe ring manufacturers, we will do our best to meet all the needs of customers.
Xinrui Plastic Technology Co., Ltd specializes in precision engineering plastics, delivering high-quality solutions for a wide range of industries. With advanced technology and expertise, we provide customized industrial plastic products that meet the stringent requirements of our customers.
We can also offer sorts of uhmwpe partsfor sale, if you are interested, please leave us a message.
在线联系供应商
Other supplier products
|
|
PTFE Ring | PTFE RingPTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong c... |
 |
PTFE Extruded Tube | PTFE Extruded Tube Polytetrafluoroethylene extrusion tube process. mixing: through the mixing machine to polytetrafluoroethylene powder and ext... |
 |
PTFE Slide Bearing Plate | PTFE slide bearing platesare made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machine... |
 |
PTFE Extruded Tube | Extruded PTFE tubeis frequently employed when a uniform wall thickness is required throughout the entire length of the tube. The polytetrafluoroeth... |
 |
PTFE Rods/Bars | PTFE (polytetrafluoroethylene) rods/bars are widely used in industries such as engineering, electronics, and chemical processing, where their excep... |
Same products
 |
Medical Plastic Parts | 卖方: Packson Mold Co.,Ltd | Project Management To be a qualified medical plastic components manufacturer, the most advanced ... |
 |
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection mol... |
 |
PA66 GF | 卖方: Suzhou Anmei Material Technology Co., Ltd | Anmei focuses on the production of modified engineering plastics. We have polyamide pa6 6gfmodif... |
 |
Nylon6 PA6 | 卖方: Suzhou Anmei Material Technology Co., Ltd | Other than fiber-reinforced pa6 polyamide, the unreinforced nylon type 6 produced by Anmei, one o... |
 |
Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering Plastics | 卖方: Suzhou Anmei Material Technology Co., Ltd | Using Polyamide 66 as the basic resin, the tensile strength of nylon 66 is obtained by blending a... |
