BLIIoT ARM Embedded Computer ARMxy Series BL410 Series with High Performance Cortex-A55 with 1Tops NPU
The BL410 series is an industrial-grade ARM embedded computer from the ARMxy series, featuring highly flexible SoM and IO port configuration capabilities. Designed based on the Rockchip RK3568J/RK3568B2 processor, it adopts a quad-core ARM Cortex-A55 architecture with a main frequency of up to 1.8GHz/2.0GHz. It is equipped with 8/16/32GB eMMC storage and 1/2/4GB LPDDR4X memory, supporting multiple storage combinations. With a built-in 1TOPS NPU for deep learning support, it is suitable for applications such as smart gateways, energy storage system EMS/BMS, motion control, edge computing, industrial control, and smart terminals.
Core Features
-
Powerful Hardware Configuration
-
Processor: Quad-core ARM Cortex-A55, 1.8GHz/2.0GHz
-
Storage: 8/16/32GB eMMC, 1/2/4GB LPDDR4X
-
NPU: Built-in 1TOPS computing power, supporting deep learning
-
Interfaces: 1~3x optional 100Mbps Ethernet ports, 2x USB 2.0, 1x optional HDMI 2.0, 1x optional X-series IO board, 2x optional Y-series IO boards
-
Video Support: 1080P@60fps hardware decoding
-
Communication: Built-in Mini PCIE interface, supporting Bluetooth, WiFi, and 4G modules
-
-
Comprehensive Software Support
-
Operating Systems: Supports Linux-5.1, Linux-RT-4.19.232, Debian-10.13, and Ubuntu20.04.
-
Development Tools: Supports Docker containers, Node-Red graphical development tools, and Qt-5.15.2 graphical interface
-
Industrial Protocols: Supports BLIoTLink industrial protocol conversion for quick integration with IoT cloud platforms and SCADA industrial configuration software
-
Remote Maintenance: Enables remote access and maintenance through the BLRAT tool, improving management efficiency
-
-
Industrial-Grade Reliability
-
Professionally designed for electrical performance and validated through high/low-temperature testing to ensure system stability and reliability
-
Supports DIN35 rail mounting, suitable for various industrial environments
-
Typical Application Fields
-
Industrial Control: Suitable for complex industrial automation scenarios
-
Edge Computing: Supports real-time data processing and analysis
-
Motion Control: Precise control of motors and motion equipment
-
Energy Storage System EMS/BMS: Efficient management of energy storage systems
-
Photovoltaic Power Generation: Supports monitoring and control of photovoltaic systems
-
Rail Transit: Applicable for traffic signal control and vehicle monitoring
-
Smart Devices: Empowers various smart terminal devices
With its powerful hardware performance, rich interface configurations, and flexible software support, the BL410 series provides efficient and reliable solutions for industrial IoT, automation control, edge computing, and other fields.
在线联系供应商
Other supplier products
 |
1.4GHz 4xA53 1+8G ARM Embedded Controller for Remote Monitoring and Control | The ARMxy BL340 series is an industrial ARM embedded computer based on the Allwinner T507-H processor with a quad-core ARM Cortex-A53 CPU, up to 1.... |
 |
工业 4.0 以太网远程监控 PLC 至 MES ERP 系统 OPC UA 转换器 | BL103是一款带以太网口和RS-232/485串口的工业网关。BL103工业网关支持西门子、三菱、欧姆龙、台达等PLC协议转OPC UA协议。PLC转OPC UA工业网关支持PLC远程监控、PLC远程编程、PLC远程调试、PLC远程上传下载、PLC远程控制、PLC数据采集、PLC远程通信。 ... |
 |
四核 ARM Cortex-A53 + Cortex-M0 ARM Edge 网关，配备 1 个用于 AoT 的 Tops NPU | ARMxy BL370 系列是一款工业级 ARM 嵌入式计算机，搭载 Rockchip RK3562/RK3562J 处理器，配备四核 ARM Cortex-A53 和单核 ARM Cortex-M0。它提供高达 1.8GHz/2.0GHz 的时钟速度，配备 8/16/32GB eMMC 存储... |
 |
Edge Comupting Gateway 4xA53 SOM340 1+8GB ARM Architecture Optional RS485/RS232/CAN/GPIO/DIN/DO/AIN/AO/RTD/TC | ARMxy BL340 系列是基于 Allwinner T507-H 处理器的工业 ARM 控制器，配备四核 ARM Cortex-A53 CPU，最高可达 1.4GHz。它具有 8/16GB eMMC 和 1/2GB DDR4 内存。BL340 提供各种 I/O 接口，包括 1-3 个 10... |
 |
工业物联网以太网 Modbus RTU/TCP 转 MQTT 网关转换器 | BL120 是一款工业以太网网关，具有以太网端口和 RS-232/485 串行端口。BLIIoT BL120 网关支持 Modbus RTU/Modbus TCP 到 Modbus TCP 工业协议转换。当使用 Modbus RTU 的计量设备需要与使用 Modbus TCP 的 SCADA ... |
